Crate & Barrel Arbor Lounge Chair Assembly Instruction
ARBOR LOUNGE CHAIR
HARDWARE
Thank you for purchasing the Arbor Lounge Chair. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
1 Loosely attach seat panel to left side
frame with 2 bolts (A). Do not fully
tigten the bolts.
4 - bolts
6x90 (A)
Missing hardware? Please call 800.606.6387 for
replacements.
4 - bolts
6x50 (B)
TOOLS REQUIRED
Allen Wrench (included)
2 Loosely attach back panel to left
side frame with 2 bolts (B).
3 Attach right side frame to assembled
unit. As illustrated, insert 2 bolts (A) into
seat panel, and 2 bolts (B) into back
panel.
At this point, fully tighten all bolts with
the Allen wrench.
Assembly is now complete.
Made in Vietnam R03
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Treat with Crate & Barrel's
Hardwood Protector or allow the finish to weather to
a silvery gray.
Page 1 of 1
ARBOR ROUND DINING TABLE
HARDWARE
Thank you for purchasing the Arbor Round Dining
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this
product.
A A
1 Attach 1 metal bracket (C) to the top
of each leg with 2 bolts (A). Secure
each bolt with the small allen wrench.
C
12 - bolts
6x60 (A)
4 - metal
brackets (C)
Missing hardware? Please call 800.606.6387 for
replacements.
12 - bolts
6x20 (B)
4 - threaded
inserts (D)
TOOLS REQUIRED
Small Allen wrench (included)
Large Allen wrench (included)
x 4
1 - umbrella
cap (E)
2 With the assistance of another adult,
place table top face down on padded
surface. Attach 4 legs to table top with 3
bolts (B) per leg. Secure with the large
Allen wrench.
3 Fit 1 bolt (A) through holes in table
top frame and each leg and into 1
threaded insert (D). Hold each threaded
insert with the small Allen wrench and
tighten each bolt with the large Allen
wrench.
4 With the assistance of another adult,
place table upright. If not using an
umbrella, conceal hole in center of table
top with the umbrella cap (E).
Assembly is now complete.
Made in Vietnam R05
B
B
B
B
B
B
A
D
B
B
B
D
D
A
A
D
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Treat with Crate & Barrel's
Hardwood Protector or allow the finish to weather to
a silvery gray.
B
B
Page 1 of 1
Loading...