Crate & Barrel Arbor Large Dining Bench Frame Assembly Instruction
ARBOR LARGE BENCH
HARDWARE
Thank you for purchasing the Arbor Large Bench. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
4 - crossbars
8 - large
bolts
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench (included)
NOTE: Do not fully tighten
the bolts until all bolts are
installed.
4 - medium
bolts
4 - small
bolts
2 - leg frames
1 - seat
Made in Vietnam - r02
crossbar
leg frame
1 Fit notches of each crossbar into corresponding
holes of 2 leg frames as shown. Loosely attach each
leg with 1 large bolt. Do not fully tighten the bolts
until all bolts are installed.
Customer Service 800.967.6696 | Latest instructions availabe at www.crateandbarrel.com
Page 1 of 2
ARBOR LARGE BENCH
A
seat
IMPORTANT: During assembly, lift
both sections of leg assembly to
prevent damage as shown
A
leg assembly
B
B
2 A) Fit notches of leg assembly into seat as shown.
Loosely attach corner legs with 4 small bolts.
B) Loosely attach center legs with 4 medium bolts.
At this point, fully tighten all bolts with an allen
wrench. Position unit upright.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Treat with Crate
& Barrel's Hardwood Protector or allow the
finish to weather to a silvery gray.
NOTE: Do not fully tighten
bolts until all bolts are
installed.
Made in Vietnam - r02
Customer Service 800.967.6696 | Latest instructions availabe at www.crateandbarrel.com
Page 2 of 2
Loading...