Crate & Barrel Arbor Dining Bench Assembly Instruction
ARBOR BENCH
HARDWARE
Thank you for purchasing the Arbor Bench. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
4 - small
bolts (A)
6 x 40
6 - bolts (C)
(6 x 35)
4 - large
bolts (B)
6 x 45
8 - bolt
caps (D)
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
2 - allen wrenches
(included)
NOTE: Do not fully tighten
the bolts until all bolts are
installed.
2 - leg frames
1 - seat
Made in Bolivia - r10
3 - crossbars
crossbar
leg frame
1 Fit notches of each crossbar into corresponding
holes of 2 leg frames as shown. Loosely attach each
leg with 1 bolt (C). Do not fully tighten the bolts until
all bolts are installed.
Customer Service 800.967.6696 | Latest instructions availabe at www.crateandbarrel.com
C
Page 1 of 2
ARBOR BENCH
NOTE: Do not fully tighten
bolts until all bolts are
installed.
leg assembly
D
D
D
A
STEP 1
A
STEP 2
B
B
D
seat
2 STEP 1) Position seat upside down onto a clean,
padded surface as shown. Fit notches of leg assembly
into seat as shown.
A
STEP 2) Per diagram, loosely attach each leg with
corresponding bolts (A or B) and 1 bolt cap (D). With 1
allen wrench, hold cap and fully tighten large bolt with
remaining allen wrench. Do not fully tighten until all bolts are
installed. Position unit upright. Assembly is now complete.
CLEANING AND CARE
D
B
B
D
A
D
A
D
D
Made in Bolivia - r10
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend
the use of outdoor furniture covers during
inclement weather.
Treat with Crate and Barrel’s Roble Protector
or allow the finish to weather to a silver gray.
Customer Service 800.967.6696 | Latest instructions availabe at www.crateandbarrel.com
Page 2 of 2
Loading...