Crate & Barrel Antenna Office Chair Assembly Instruction

ANTENNA OFFICE CHAIR

Thank you for purchasing the Antenna Office Chair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect
them from damage.

HARDWARE

1 - bolt

Missing hardware? Please call 800.606.6387 for replacements.

TOOLS REQUIRED

allen wrench (included)

COMPONENTS

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.

ASSEMBLY

caster

1 - seat back 1 - base

seat
back

base

4 - casters

1 Place base upside-down onto
clean, padded surface as shown.
Insert 4 casters into the bottom of
each leg as shown.

Made in Taiwan - r04

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 Position base upright and fit
seat back into base as shown.

3 Secure seat back to base with
1 bolt, using an allen wrench. Do
not over tighten the bolt.

Assembly is now complete.

Page 1 of 1