Crate & Barrel Antenna File Cabinet Assembly Instruction

ANTENNA FILE

Thank you for purchasing the Antenna File. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.

HARDWARE

4 - bolts

Missing hardware? Please call 800.606.6387 for replacements.

TOOLS REQUIRED

hex wrench ( included)

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

COMPONENTS

2 - back casters 2 - front casers

2 - pulls

1 - file asembly

1 - file rail

NOTE: Do not over
tighten the bolts

pull

file assembly

1 Open drawer fronts of file assembly and attach 1 pull
with 2 bolts as shown. Secure, but do not over tighten, with
a phillips head screwdriver.

Made in Taiwan - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ANTENNA FILE

letter size

legal size

back
casters

front
casters

2 Attach 2 front casters to front of the unit and 2 back

casters to back of unit as shown. Secure casters using a
hex wrench.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.

file rail

3 Attach file rail for hanging folders into bottom
drawer. For letter size files, attach file rail to notches
closest to front of drawer. For legal size files, attach file
rail to notches closest to back of drawer.
Assembly is now complete.

Made in Taiwan - r02 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com