Crate & Barrel Alto 3-pc High Dining Set, Alto 5-pc High Dining Set, Alto High Dining Table Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALTO HIGH DINING TABLE
Thank you for purchasing the Alto High Dining
Table. This page lists all the contents included in
the box. Please take time to identify the hardware
as well as the individual components of this product.
As you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
COMPONENTS
1 - tabletop
2 - top rails
1 - bottom rail
2 - leg frames
Made in China
HARDWARE
12 - machine screws
4 - tube caps
Missing hardware? Please call 800.606.6387 for replacements.
10 - wood screws
10 - washers
TOOLS REQUIRED
Allen Wrench (included)
Phillips Head Screwdriver
Hammer
x 2
A
B
1 A. Lay 1 leg frame on its side with the tube fittings
facing up. Slide 2 top rails over tube fittings, making sure
brackets face each other and holes in legs and fittings are
aligned.
B. Secure each rail with 2 machine screws. Do not fully
tighten the screws at this point.
Page 1 of 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALTO HIGH DINING TABLE
A
B
2 A. Slide bottom rail over tube fitting.
B. Secure with 2 machine screws. Do not fully tighten.
A
x 12
B
4 A. Place tabletop on the floor with the pre-drilled holes
facing up. With the assistance of another adult, place leg
frame assembly on tabletop, aligning holes in tabletop and
metal brackets on leg frame. Make any necessary
adjustments to the metal frame to make it flush with the
edges of the tabletop. At this point, fully tighten all machine
screws with the allen wrench.
B. Secure tabletop to frame with 10 wood screws and 10
washers. Fully tighten with a phillips head screwdriver.
Made in China
A
B
3 A. Fit other leg frame into ends of top & bottom rails.
B. Secure leg frame to rails with 2 machine screws per
rail. Do not fully tighten.
5 Using a hammer, attach plastic tube caps to bottom of
the legs. Assembly is now complete.
CLEANING AND CARE
Clean wood surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 2 of 2
Loading...