ALLEGRO WINE TOWER
ASSEMBLY HARDWARE
Thank you for purchasing the Allegro Wine Tower. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
16 - allen
bolts
16 - spring
washers
Missing hardware?
Please call 800.606.6387 for replacements.
1 - phillips
bolt
16 - flat
washers
4 - screws
dowels
6 - shelf/
drawer pins
1 - pull12 - wood
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
allen wrench (included)
2 - side panels
(1 left, 1 right)
1 - back panel
3 - back wine
rack panels
Made in China - r07
1 - top panel
1 - adjustable shelf
2 - front wine
rack panels
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - support panel
1 - shelf
4 - legs
1 - bottom panel
1 - drawer assembly
Page 1 of 4
ALLEGRO WINE TOWER
right side
panel
left side
panel
1 Insert 4 wood dowels into left and right side panels as
shown.
NOTE: Make sure groove
of side panels are
assembled as shown
right side
panel
fixed
shelf
2 Insert 4 wood dowels into fixed shelf as shown.
NOTE: Make sure groove
of side panels and bottom
panel are assembled as
shown
left side
panel
3 A) Fit dowels of fixed shelf into corresponding holes of
left side panel and right side panels.
Made in China - r07
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE: Do not over
tighten the bolts
bottom
panel
4 Fit dowels of left and right side panels into
corresponding holes of bottom panel as shown. Secure
with 4 flat washers, 4 spring washers and 4 allen bolts.
Secure, but do not over tighten, bolts with an allen
wrench.
Page 2 of 4
ALLEGRO WINE TOWER
back panel
top panel
5 Carefully slide back panel into corresponding grooves
of assembled unit as shown.
leg
7 Loosely attach 3 legs to assembled unit as shown
with 2 flat washers, 2 spring washers and 2 allen bolts
per leg.
6 Fit dowels of assembled unit into corresponding holes of
top panel as shown. Secure with 4 flat washers, 4 spring
washers and 4 allen bolts using an allen wrench.
C
leg
B
C
NOTE: Do not over
tighten the screws
8 A) Fit support panel into corresponding slots of leg
assembly as shown.
B) Attach remaining leg to assembled unit as shown with 2
flat washers, 2 spring washers and 2 allen bolts. At this
point, fully tighten all bolts using an allen wrench.
C) Secure support panel with 4 screws using a screwdriver.
Do not over tighten the screws.
A
support
panel
Made in China - r07
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 3 of 4
ALLEGRO WINE TOWER
back wine
rack panel
front wine
rack panel
9 Slide 3 back wine rack panels into corresponding slots
of 2 front wine rack panels.
adjustable
A
shelf
pins
NOTE: Make sure
slated edge is
assembled towards
the back
shelf
B
wine rack
assembly
C
pull
10 Attach pull to drawer assembly with 1 phillips bolt
using a screwdriver.
drawer pins
drawer
assembly
11 A) With the assistance of another adult, place unit
upright. Insert 4 shelf pins at desired shelf height.
B) Place adjustable shelf into assembled unit. Make sure
shelf is securely supported by each shelf pin.
C) Fit wine rack assembly into assembled unit as shown.
Made in China - r07
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
12 Insert drawer assembly halfway into assembled unit.
Attach 2 drawer pins to fixed panel as shown. Fully insert
drawer assembly into unit.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 4 of 4
Loading...