Crate & Barrel Allegro Settee Mocha, Allegro Settee Palm Assembly Instruction
ALLEGRO SETTEE
HARDWARE
Thank you for purchasing the Allegro Settee. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - small
screw
12 - spring
washers
Missing hardware? Please call 800.606.6387 for replacements.
4 - large
screws
12 - flat
washers
12 - bolts
4 - wood
dowels
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
Made in China - r08
1 - backrest
2 - legs 2 - crossbars
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - seat
( crossbar A, crossbar B)
Page 1 of 3
ALLEGRO SETTEE
crossbar
B
crossbar
A
bottom
cover
seat
NOTE: Bottom cover
is fixed to the side and
front edges of seat
1 Attach crossbars A and B with 1 small screw as
shown. Secure screw with a phillips head screwdriver.
A
seat
B
bolt
spring washer
B
flat washer
A
NOTE: Bottom cover
is not shown for
assembly purposes
backrest
2 The bottom cover is fixed to the side and front edges
of the seat as shown. Peel back corners of bottom
cover to assemble legs.
crossbar
FRONT
assembly
NOTE: Make sure
“FRONT” labeled
on each crossbar
FRONT
is assembled to
the front of the unit
3 A) Insert 4 wood dowels into backrest as shown.
B) Fit dowels of backrest into corresponding holes of
seat. Loosely attach with 8 large bolts, 8 spring
washers, and 8 flat washers as shown.
Made in China - r08
4 Fit dowels of crossbar assembly into
corresponding holes of assembled unit as shown.
Customer Service 800.967.6696 | www.crateandbarrel.com
Page 2 of 3
Loading...