ALLEGRO OTTOMAN
HARDWARE
Thank you for purchasing the Allegro Ottoman. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - small
screw
8 - spring
washers
Missing hardware? Please call 800.606.6387 for replacements.
4 - large
screws
8 - flat
washers
8 - bolts
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
1 - cushion 4 - legs
Made in China - r07
2 - crossbars
( crossbar A, crossbar B)
Customer Service 800.967.6696 | www.crateandbarrel.com
crossbar
B
crossbar
A
1 Attach crossbars A and B with 1 small screw as
shown. Secure screw with a phillips head screwdriver.
Page 1 of 3
ALLEGRO OTTOMAN
bottom
cover
cushion
NOTE: Bottom cover
is fixed to the side and
front edges of cushion
leg
NOTE: Bottom cover
is not shown for
assembly purposes
cushion
2 The bottom cover is fixed to the side and front
edges of the cushion as shown. Peel back corners of
bottom cover to assemble legs.
spring
flat
washer
washer
bolt
2 Fit 2 legs into cushion as shown.
crossbar
assembly
4 Loosely attach each leg with 2 large bolts, 2 spring
washers, and 2 flat washers as shown.
Made in China - r07
Customer Service 800.967.6696 | www.crateandbarrel.com
5 Fit dowels of crossbar assembly into
corresponding holes of legs as shown.
Page 2 of 3
ALLEGRO OTTOMAN
leg
bolts
spring
washer
flat
washer
6 Fit remaining 2 legs to assembled unit as shown.
NOTE: Large screws are
secured at an angle
8 Attach crossbar assembly of assembled unit with 4
large screws as shown. Secure screws with a
screwdriver. At this point, fully tighten all bolts with an
allen wrench.
7 Loosely attach 2 legs with 2 bolts, 2 spring
washers, and 2 flat washers per leg as shown.
bottom
cover
9 Align velcro of bottom cover back onto the
corners of assembled unit as shown. Press firmly to
secure. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture wax
or polish as the wood is finished with a protective
clear lacquer. Do not leave spills unattended.
Spot clean as necessary.
Made in China - r07
Customer Service 800.967.6696 | www.crateandbarrel.com
Page 3 of 3
Loading...