Page 1
ALLEGRO LOUNGE CHAIR
HARDWARE
Thank you for purchasing the Allegro Lounge Chair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - small
screw
10 - spring
washers
Missing hardware? Please call 800.606.6387 for replacements.
4 - large
screws
10 - flat
washers
10 - large
bolts
3 - wood
dowels
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
Made in China - r10
1 - backrest 1 - seat cushion
2 - legs
Customer Service 800.967.6696 | www.crateandbarrel.com
2 - crossbars
( crossbar A, crossbar B)
Page 1 of 3
Page 2
ALLEGRO LOUNGE CHAIR
crossbar
A
bottom
cover
crossbar
B
1 Attach crossbars A and B with 1 small screw as
shown. Secure screw with a phillips head screwdriver.
NOTE: Bottom cover
is not shown for
assembly purposes
B
seat
bolt
spring washer
flat washer
B
A
seat
NOTE: Bottom cover
is fixed to the front
edge of seat
2 The bottom cover is fixed to the front edge of the
seat as shown. Peel back corners of bottom cover to
assemble legs.
crossbar
FRONT
assembly
FRONT
NOTE: Make sure
“FRONT” labeled
on each crossbar
is assembled to
the front of the unit
A
backrest
3 A) Insert 3 wood dowels into backrest as shown.
B) Fit dowels of backrest into corresponding holes of
seat. Loosely attach seat to backrest with 6 large
bolts, 6 spring washers, and 6 flat washers as shown.
Made in China - r10
Customer Service 800.967.6696 | www.crateandbarrel.com
4 Fit dowels of crossbar assembly into
corresponding holes of assembled unit as shown.
Page 2 of 3
Page 3
ALLEGRO LOUNGE CHAIR
leg
flat washer
spring washer
bolts
5 Fit 2 legs into assembled unit as shown.
NOTE: Large screws are
secured at an angle
6 Loosely attach front legs to assembled unit with 2
bolts, 2 spring washers, and 2 flat washers per leg as
shown.
bottom
cover
8 Align velcro of bottom cover back onto the
corners of assembled unit as shown. Press firmly to
secure. Assembly is now complete.
7 Attach crossbar assembly of assembled unit with 4
large screws as shown. Secure screws with a
screwdriver. At this point, fully tighten all bolts with an
allen wrench.
Made in China - r10
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture wax
or polish as the wood is finished with a protective
clear lacquer. Do not leave spills unattended.
Spot clean as necessary.
Customer Service 800.967.6696 | www.crateandbarrel.com
Page 3 of 3
Loading...