Crate & Barrel Allegro Extension Dining Table Assembly Instruction

ALLEGRO ROUND EXTENSION DINING TABLE

HARDWARE

Thank you for purchasing the Allegro Round Extension
Dining Table. This page lists all the contents included in

the box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

4 - tabletop
bolts

8 - flat
washers

Missing hardware? Please call 800.606.6387 for replacements.

8 - spring
washers

4 - base
bolts

8 - wood
dowels

TOOLS REQUIRED

allen wrench (included)

1 - tabletop 1 - leaf

1 - base

1 - pedestal

base

base
bolt

spring
washer

flat
washer

pedestal

1 Fit 4 wood dowels into pedestal as shown. Attach base to
pedestal with 4 base bolts, 4 spring washers and 4 flat
washers. With assistance of another adult, position unit upright.

Made in China- r06 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ALLEGRO ROUND EXTENSION DINING TABLE

2 A) Insert 4 wood dowels into pedestal
assembly as shown. Fit dowels of pedestal
assembly into corresponding holes of tabletop.
B) Locate 4 locking clasps underneath tabletop,
turn each clasp counter-clockwise to unlock.
With the assistance of another adult, carefully pull
each end of tabletop to open. Secure, but do not
over tighten, tabletop with 4 tabletop bolts, 4

spring washers, and 4 flat washers, using an
allen wrench. At this point, close and secure

tabletop.
Assembly is now complete.

A

wood
dowels

tabletop
bolt

spring
washer

flat
washer

mounting
plate

B

tabletop

A

pedestal
assembly

B

INSTRUCTIONS
TO RELEASE

VIEW FROM UNDERNEATH

TABLETOP

LEAF EXTENSION

• Turn clockwise

to lock

• Turn counter-

clockwise to unlock

90º

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is

1 A) Locate 4 locking clasps underneath tabletop
assembly.
B) With the assistance of another adult, slide tabletop
sections apart. Place leaf into position, aligning aprons on
leaf and tabletop. Push both ends of tabletop together.
Re-latch locking clasps.
Leaf assembly is now complete.

Made in China - r06 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

recommended to use coasters to protect surface from
heat and water.