Crate & Barrel Allegro Dining Table Assembly Instruction

ALLEGRO DINING TABLE
HARDWARE
Thank you for purchasing the Allegro Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - short bolts
12 - flat washers
4 - long bolts
12 - spring washers
Missing hardware? Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench (included)
NOTE: Do not over tighten bolts
2 - legs
1 - tabletop
(with grooves)
2 - legs
(w/o grooves)
NOTE: Make sure legs with and without grooves are oriented as shown
long bolt
spring washer
flat washer
leg with grooves
leg without grooves
1 With the assistance of another adult, fit pre-attached dowels of each leg into corresponding holes of base as shown. Make sure legs with and without grooves are
1 - base 1 - mounting plate
oriented as shown. Secure base with 4 long bolts, 4
spring washers and 4 flat washers using an allen wrench as shown. Do not over tighten bolts.
Made in China - r04 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
ALLEGRO DINING TABLE
2 With the assistance of another adult, carefully turn assembled unit over and attach mounting plate with 4 short bolts, 4 spring washers and 4 flat washers using an allen wrench as shown.
short bolt
spring washer
flat washer
short bolt
spring washer
flat washer
4 With the assistance of another adult, place tabletop face down onto a clean, padded surface as shown. Turn assembled unit over and attach to tabletop with 4 short bolts, 4 spring washers and 4 flat washers using an allen wrench. Position unit upright. Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat and water.
Made in China - r04 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...