Crate & Barrel Allegro Cafe Table Assembly Instruction
ALLEGRO CAFÉ TABLE
HARDWARE
Thank you for purchasing the Allegro Café Table. This
page lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - short
bolts
16 - flat
washers
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench (included)
NOTE: Do not over
tighten bolts
4 - long
bolts
16 - spring
washers
2 - legs
1 - tabletop
(with grooves)
2 - legs
(w/o grooves)
NOTE: Make sure legs
with and without grooves
are oriented as shown
long bolt
spring
washer
flat
washer
leg with
grooves
leg without
grooves
1 With the assistance of another adult, fit pre-attached dowels
of each leg into corresponding holes of base as shown. Make
sure legs with and without grooves are oriented as shown.
1 - base 1 - mounting plate
Secure base with 4 long bolts, 4 spring washers and 4 flat
washers using an allen wrench as shown. Do not over tighten
bolts.
Made in China - r06 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
ALLEGRO CAFÉ TABLE
short bolt
spring
washer
flat
washer
short bolt
spring
washer
flat
washer
3 With the assistance of another adult, carefully turn
assembled unit over and attach mounting plate with
8short bolts, 8 spring washers and 8 flat washers using
an allen wrench as shown.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
4 With the assistance of another adult, place tabletop face down
onto a clean, padded surface as shown. Turn assembled unit
over and attach to tabletop with 4 short bolts, 4 spring washers
and 4 flat washers using an allen wrench. Position unit upright.
Assembly is now complete.
Made in China - r06 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...