ALFRESCO DINING TABLE
HARDWARE
Thank you for purchasing the Alfresco Dining Table. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this product.
NOTE: Do not over
tighten the bolts
leg
leg
A
sleeve
1 - tabletop
cap
Missing hardware?
Please call 800.606.6387 for replacements.
8 - bolt
caps
TOOLS REQUIRED
allen wrench (included)
COMPONENTS
4 - legs
1 A) With the assistance of another adult, place tabletop upside
down onto a clean, padded surface. Fit 4 legs over sleeves on
tabletop as shown.
B) Secure legs to tabletop by tightening pre-installed bolts as
shown using an allen wrench. Do not over tighten the bolts.
C) Cover all exposed bolts with 8 bolt caps.
1 - tabletop
B
C
tabletop
Made in China - r04 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
bolt cap
ALFRESCO DINING TABLE
tabletop cap
2 With the assistance of another adult, position
table upright. Insert tabletop cap into center
hole of assembled unit as shown.
Assembly is now complete.
METHOD TO ADJUST LEVELERS ON TABLE
leg
leveler
NOTE: This table comes with pre-attached
levelers. Please do the following if your table is
not level.
With the assistance of another adult, adjust
levelers of each leg as necessary.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. It is recommended to use
coasters to protect surface from heat and water and to
cover the table if left outdoors for the winter.
To remove small scratches, the tabletop can be lightly
sanded with a 0000 extra fine steel wool or very fine
sand paper. Remember to always sand in the direction
of the wood grain.
Made in China - r04 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com