Crate & Barrel Alfresco Dining Bench Assembly Instruction
ALFRESCO BENCH
Thank you for purchasing the Alfresco Bench. This page
lists all the contents included in the box. Please take time
to identify the hardware as well as the individual components of this product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
Missing hardware?
8 - bolt
caps
Please call 800.606.6387
for replacements.
TOOLS REQUIRED
allen wrench (included)
COMPONENTS
4 - legs
1 - benchtop
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. It is recommended to use coasters to protect
surface from heat and water and to cover the bench if left
outdoors for the winter.
To remove small scratches, the benchtop can be lightly sanded
with a 0000 extra fine steel wool or very fine sand paper.
Remember to always sand in the direction of the wood grain.
NOTE: Do not over
tighten the bolts
leg
A
leg
sleeve
benchtop
B
1 A) With the assistance of another adult, place benchtop
upside down onto a clean, padded surface. Fit 4 legs over
sleeves on benchtop as shown.
B) Secure legs to benchtop by tightening pre-installed bolts as
shown using an allen wrench. Do not over tighten the bolts.
C) Cover all exposed bolts with 8 bolt caps.
Assembly is now complete.
C
bolt cap
Made in China - r06 Page 1 of 1
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...