Crate & Barrel Alfresco Chaise Lounge Assembly Instruction

ALFRESCO CHAISE LOUNGE

HARDWARE

Thank you for purchasing the Alfresco Chaise Lounge.
This page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY

2 - wheels

Missing hardware? Please call 800.606.6387 for replacements.

2 - small bolts
(pre-installed)

COMPONENTS

1 - chaise assembly

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

pin

B

small bolt

NOTE: Do not over
tighten the bolts

B

chaise assembly

1 A) Remove 2 small bolts (pre-installed) from chaise
assembly using a phillips head screwdriver.
B) Insert pin of wheel into corresponding hole of chaise
assembly as shown. Align hole in pin with hole in leg.
Secure wheel to chaise assembly with 1 small bolt using
a screwdriver. Make sure wheel is securely engaged by
bolt. Do not over tighten the bolt. Repeat steps for remain­ing wheel.
Assembly is now complete.

wheel

Made in China - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ALFRESCO CHAISE LOUNGE

ADJUSTING SEAT BACK

Pull lever out from underside of assembly, adjust
seat back to desired height. Release lever to

lock seat back into position.

seat back

lever

Assembly is now complete.

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. It is recommended to cover the chaise if left
outdoors for the winter.

To remove small scratches, trays can be lightly sanded with a
0000 extra fine steel wool or very fine sand paper. Remember
to always sand in the direction of the wood grain.

Made in China - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com