Crate & Barrel Alden Twin Bed Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALDEN TWIN BED

Thank you for purchasing the Alden Twin Bed. This
page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - headboard

1 - foot board

2 - side rails (1 right, 1 left)

Made in Thailand - r04

1 - slat assembly

HARDWARE

6 - small screws 8 - bolts

8 - flat washers 8 - split washers

Missing hardware? Please call 800.606.6387 for
replacements.

TOOLS REQUIRED

Allen Wrench (included)

Phillips Head Screwdriver

x 2

1 With the assistance of another adult, fit dowels of side
rails into corresponding holes in headboard. Insert 2 bolts,

2 split washers and 2 flat washers through holes in each
metal bracket and into the headboard. Fully tighten each bolt
with the allen wrench.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALDEN TWIN BED

x 2

2 Attach foot board to each side rail with 2 bolts, 2
split washers and 2 flat washers. Secure all bolts with

the allen wrench.

Made in Thailand - r04

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is finished
with a protective clear lacquer.

3 Place slat assembly onto support ledge on inside of
each rail, aligning holes in slats with holes in ledge. Secure
with 6 small screws, fully tightening each with a phillips

head screwdriver.

Assembly is now complete.

Page 2 of 2