Crate & Barrel Alden Storage Bench Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALDEN STORAGE BENCH
Thank you for purchasing the Alden Storage Bench.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
1 - top panel
1 - bottom panel
1 - front panel
1 - back panel
1 - left side panel
Made in China R06
1 - right side panel
HARDWARE
8 - small
screws
18 - spring
washers
Missing hardware? Please call 800.606.6387 for
replacements.
18 - large
screws
8 - small
washers
2 - top supports
10- large
washers
TOOLS REQUIRED
Phillips Head Screwdriver
x 3
1 With the assistance of another adult, place front panel on
padded surface. Attach bottom panel to back of front panel
with 3 large bolts, 3 spring washers and 3 large washers
Turn Phillips head screwdriver clockwise to fasten.
Page 1 of 3
.
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALDEN STORAGE BENCH
x 3
2 Carefully attach assembled unit to back panel with 3
large bolts, 3 spring washers, and 3 large washers.
Fasten using Phillips head screwdriver.
4 A) Fit right and left side panels and bottom panel onto
wood dowels of assembled unit. Secure side panels with 8
large bolts, 8 spring washers and 8 small washers.
B) Flip assembly over. Secure bottom panel to assembly
with 4 large bolts, 4 spring washers and 4 large washers.
Secure all bolts with a Phillips head screwdriver.
Made in China R06
A
x 8
B
x 4
3 Carefully slide top panel into groove provided on back
panel. Do not fasten top panel until both side panels are
attached.
x 2
5 With the assistance of another adult, place unit upright.
Open top panel and attach 2 top supports with 4 small
screws per support as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
Page 2 of 2
Loading...