Crate & Barrel Alden Nightstand Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALDEN NIGHTSTAND

Thank you for purchasing the Alden Nightstand.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

COMPONENTS

1 - top panel

1 - shelf

1 - back panel

1 - drawer front

2 - leg frames
(1 left, 1 right)

2 - drawer sides
(1 left, 1 right)

Made in Thailand - r02

1 - drawer
back

1 - drawer
bottom

HARDWARE

12 - flat head
screws

1 - pull screw 1 - drawer pull

Missing hardware? Please call 800.606.6387 for replacements.

4 - pan head
screws

10 - bolts

TOOLS REQUIRED

Allen wrench (included)

Phillips head screwdriver

A

x 2

B

1 A. Fit dowels of back panel into corresponding holes
in left leg frame. Attach with 2 bolts and secure with the
allen wrench.
B. Fit dowels of shelf into corresponding holes in legs as
shown.

Page 1 of 3

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALDEN NIGHTSTAND

A

2 A. Fit right leg frame onto back panel and shelf,
aligning dowels with corresponding holes. Attach back
panel with 2 bolts and secure with the allen wrench.
B. Fasten shelf to legs with 4 pan head screws as
shown. Secure with a phillips head screwdriver.

A

B

4 A. Fit left drawer side onto drawer back dowels as
shown. Attach with 3 flat head screws and fasten with a
phillips head screwdriver. Do not over tighten the
screws.
B. Attach drawer front to drawer side with 3 flat head
screws.
C. Slide drawer bottom into slot at bottom of drawer
back, side and front.

Made in Thailand - r02

B

NOTE:

Do not over tighten
the screws.

C

3 Align holes in top panel with corresponding holes in
leg frames and back panel. Attach with 6 bolts, securing
each with the allen wrench.

A

B

5 A. Attach remaining side panel to drawer back and
front with 6 flat head screws.
B. Attach drawer pull with 1 pull screw. Secure with a
phillips head screwdriver.

Page 2 of 3