Crate & Barrel Alden Mirror Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALDEN 25" ROUND MIRROR
Thank you for purchasing the Alden 25" Round
Mirror. This page lists all the contents included in
the box. Please take time to identify the hardware
as well as the individual components of this product.
As you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
NOTE: 2 people are required to safely hang this
mirror.
COMPONENTS
1 - mirror frame
1 - mirror
1 - plywood back
Made in China - r03
HARDWARE
8 -screws
Missing hardware? Please call 800.606.6387 for
replacements.
8 -mounting
tabs
1 - hanging wire
TOOLS REQUIRED
Phillips head screwdriver
Mirror with
beveled edge
facing down
1 Place mirror frame face down on a smooth, carpeted
surface. Carefully place the mirror between the spacers on
the back of the frame. Make sure the beveled edge of the
mirror faces down.
Page 1 of 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALDEN 25" ROUND MIRROR
2 Place plywood back on top of mirror, between
the spacers.
4 Insert 2 screws through the hanging wire and 2
mounting tabs and into the mirror frame as shown. Fully
tighten all screws with a phillips head screwdriver.
Made in China - r03
3 Secure 6 mounting tabs to back of frame assembly
with 6 screws, leaving 2 holes open as shown. Tighten
each screw with a phillips head screwdriver.
HANGING INSTRUCTIONS
Please note that hanging hardware is not included with
this mirror. Use hardware appropriate for your wall type. If
you are unsure about your wall type, consult a professional or
your local hardware store. Whenever possible, hanging
hardware should be installed in a wall stud.
CAUTION: Use extreme caution when hanging heavy
objects on the wall. Improper anchoring may result in serious
injury.
CLEANING AND CARE
Clean metal surfaces with a dry or damp soft cloth.
Clean mirror with a glass cleaner.
Do not use abrasive cleaners on the mirror or frame.
Page 2 of 2
Loading...