Crate & Barrel Alcove Wall Mirror Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALCOVE WALL MIRROR

Thank you for purchasing the Alcove Wall Mirror. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely install this product.

HARDWARE

4 - screws 4 - drywall anchors

INSTALLATION INSTRUCTIONS

Note: The wall mounting hardware included with this mirror is intended for drywall installation only. Be sure to use
hardware appropriate for your wall type. Whenever possible, attach mounting hardware into a wall stud.
If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your
local hardware store.

1) Determine where you wish to hang the mirror and mark on the wall where the 2 anchors should be inserted.
Vertically oriented, the distance between the 2 keyhole hanging brackets is 24".
Horizontally oriented, the distance between the 2 keyhole hanging brackets is 30".
Make sure both marks are level.

2) Drill a pilot hole for each anchor slightly smaller than the diameter of the drywall anchor.

3) Insert 1 drywall anchor into each hole until the head of the anchor is flush with the surface of the wall. Gently tap with 
a hammer if necessary.

4) Fasten 1 screw with a phillips head screwdriver into each drywall anchor, leaving approximately 1/4" of the screw  
projecting from the face of the wall.

5) With the assistance of another person, hang the mirror on the screw heads. Make sure that each screw   
head snugly engages the keyhole bracket fitting.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Use glass cleaner to clean the mirror as necessary.

Made in China - r05

x 2

TOOLS REQUIRED

Phillips head screwdriver

This mirror can be mounted in a vertical or horizontal
orientation. Note the position of keyhole hanging
hardware for each orientation.

Missing hardware? Please call 800.606.6387 for
replacements.

Page 1 of 1