Crate & Barrel Alcove Storage Cabinet Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALCOVE STORAGE CABINET

Thank you for purchasing the Alcove Storage Cabinet.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

2 - side panels
(1 left, 1 right)

1 - front panel

3 - shelves

1 - drawer front 2 - drawer sides

Made in China - r04

(1 left, 1 right)

HARDWARE

2 - wood
dowels

18 - bolts

18 - washers

Missing hardware? Please call 800.606.6387 for
replacements.

12 - short
wood screws

4 - knob
screws

18 - split washers

8 - medium
wood screws

4 - knobs 4 - shelf

TOOLS REQUIRED

Phillips head screwdriver

1 - back panel

2 - drawer rails

1 - top panel

1 - drawer back 1 - drawer bottom

(1 left, 1 right)

8 - large
wood screws

pins

Page 1 of 4

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALCOVE STORAGE CABINET

x 2

1 A. Attach 1 drawer rail to the inside of each side panel as
shown with 4 long wood screws. Secure each screw with a
phillips head screwdriver, but do not overtighten.
B. Place front frame face down on a padded surface.
Loosely attach 2 side panels with 3 bolts, 3 split washers
and 3 washers per panel. Do not fully tighten bolts.

x 6

3 Place back panel face down and position case assembly
as shown. Align dowels with corresponding holes in back
panel and loosely attach with 6 bolts, 6 split washers and 6
washers. Do not fully tighten the bolts.

Made in China - r04

A

B

x 4

2 Fit 1 shelf into position as shown. Loosely attach with 4
short screws from below and secure with a screwdriver. Do

not fully tighten screws.

NOTE:

Do not over
tighten bolts
and screws.

x 4

4 Position case assembly as shown. Fit 1 shelf into bottom
of assembly and secure with 4 small wood screws from
below.
At this point fully tighten bolts & screws installed in Steps 1­4 with a phillips head screwdriver. Do not over tighten the
bolts & screws.

Page 2 of 4