Crate & Barrel Alcove Storage Bench Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALCOVE STORAGE BENCH

Thank you for purchasing the Alcove Storage Bench.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - top panel

1 - front panel 1 - bottom panel

1 - back panel

Made in China - r02

2 - side panels
(1 left, 1 right)

HARDWARE

14 - washers

8 - wood
screws

Missing hardware? Please call 800.606.6387 for
replacements.

14 - split washers 14 - bolts

2 - knob screws

2 - knobs

TOOLS REQUIRED

Phillips head screwdriver

x 4

1 Lay front panel face down on a padded surface. Fit
dowels of 2 side panels into corresponding holes in front
panel. Insert 2 bolts, 2 split washers and 2 washers
through each side panel and into front panel and loosely
attach. Do not fully tighten bolts.

Page 1 of 3

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALCOVE STORAGE BENCH

NOTE:

Do not over tighten the screws.

x 4

2 Fit bottom panel into position as shown. Secure with 4
wood screws and a phillips head screwdriver.
At this point fully tighten the bolts from Step 1 with a phillips
head screwdriver.

4 Secure back of bottom panel to case with 4 wood
screws and a phillips head screwdriver.

Made in China - r02

x 4

x 4

3 Align dowels in side panels with corresponding holes in
the back frame and fit into position. Secure with 2 bolts, 2

split washers and 2 washers per side panel.

x 6

5 Position case assembly as shown. Line up corresponding
holes and dowels with holes in the underside of top panel.
Secure with 6 bolts, 6 split washers and 6 washers. Fully
tighten each bolt with a phillips head screwdriver.

Page 2 of 3