Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALCOVE HALLWAY SECRETARY
Thank you for purchasing the Alcove Secretary. This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack
COMPONENTS
1 - right side panel
1 - bottom
shelf panel
1 - left side panel
1 - top panel
1 - front frame
(with cabinet doors)
1 - desktop
panel (with hinges
attached)
1 - back panel
Made in China - R05 Page 1 of 4
1 - bottom panel
HARDWARE
29 - large
washers
6 - small
wood screws
2 - wood
dowels
Missing hardware?
Please call 800.606.6387 for replacements.
29 - split
washers
16 - medium
wood screws
2 - support
hinges
29 - bolts
6 - large
wood screws
1- large
knob bolt
4 - knobs
TOOLS REQUIRED
Phillips head screwdriver
1 - grooved shelf
panel
1 - drawer
front
1 - drawer bottom 1 - drawer back
1 - top shelf
(grooves on bottom)
1 - left
drawer rail
1 - left
drawer side
3 - knob
bolts
8 - small
screws
1 - right
drawer rail
5 - divider panels
8 - large
screws
1 - grommet
1 - right
drawer side
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALCOVE
NOTE:
Do not over tighten bolts.
HALLWAY SECRETARY
A
x8
Grooved
Shelf
Bottom
Shelf
B
1
A) Attach grooved shelf to left and right side panels
with 4 bolts, 4 large washers, and 4 split washers, as
illustrated above. Secure with a phillips head
screwdriver.
B) Attach bottom shelf to assembled unit with 4 bolts,
4 large washers and 4 split washers. Secure with a
screwdriver.
Front frame
C
A
x8
C
B
x3
B
A) Fit front frame onto case assembly, making sure to line
3
up corresponding dowels and holes. Open doors to
access the case interior.
B) Insert 8 bolts, 8 large washers, and 8 split washers
up through each side panel and into front frame as shown.
Secure with a phillips head screwdriver.
C) Insert 3 large wood screws to secure bottom panel.
Secure each screw with a phillips head screwdriver.
Made in China R05 Page 2 of 4
A
Grooved
Shelf
x3
A) With the assistance of another adult, position
2
assembly on top of back panel by aligning wood
dowels of side panels with corresponding holes in back
panel. Attach with 4 bolts, 4 large washers, and 4
split washers per side panel. Secure with a phillips
head screwdriver.
B) Attach bottom panel with 3 large wood screws.
Secure each screw with a phillips head screwdriver.
B
Bottom
Shelf
x5
4
Fit top panel onto dowels of assembled unit. Secure
top panel with 5 bolts, 5 large washers, and 5 split
washers. Secure with a phillips head screwdriver.
x8
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALCOVE HALLWAY SECRETARY
A
5
A) Attach left drawer rail to left side panel with 4
large screws, and secure with a phillips head
screwdriver. Attach right drawer rail to right side
panel with 4 large screws.
B) Attach 1 knob to each door panel using 1 knob
bolt per knob, as illustrated above. Secure using a
phillips head screwdriver.
B
B
A
C
A) Attach desktop panel to assembled unit with 3 small
7
wood screws per hinge, as illustrated above. Secure
each screw with a phillips head screwdriver.
B) Attach support hinges to right and left side panels
using 4 medium wood screws on each side.
Attach the other end of the support hinge to desktop
panel using 4 medium wood screws on each side.
C) Attach 1 knob to desktop panel using 1 large knob
bolt.
Made in China R05 Page 3 of 4
B
A
A
x2
B
x4
Make sure this
hole is at the back
of the drawer sides
A
A & C
B
D
6
A) Attach left drawer side and right drawer side to
drawer back with 4 small screws as shown. Do not
over tighten screws.
B) Fit drawer bottom into groove on drawer back.
C) Attach drawer front to assembly with 4 small
screws.
D) Attach 1 knob to drawer front with 1 knob bolt
and secure with phillips head screwdriver.
8
Insert grommet into hole provided on back
panel.
C
Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALCOVE
HALLWAY SECRETARY
B
A
Notch on
each divider
faces forward
9
A) Insert 5 dividers into corresponding grooves into the
grooved shelf. Make sure notch on each divider faces
forward. Press each divider firmly to secure.
B) Insert top shelf into case at and angle. Align grooves
on underside of top shelf with tops of dividers and firmly
press fit into position.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
Made in China R05 Page 4 of 4
B
A
10
A) Insert assembled drawer into assembled unit, lining
up grooves on drawer sides with corresponding rails.
B) Insert 1 wood dowel into left side drawer panel
and 1 wood dowel into right side drawer panel to
secure drawer in place.
Assembly is now complete.
Loading...