Crate & Barrel Air Wine Bar Table Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
AIR WINE BAR TABLE
Thank you for purchasing the Air Wine Bar. This
page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
COMPONENTS
2 - side frames
1 - top rear rail
1 - top front rail
4 - shelves
1 - bottom shelf
1 - glass top
Made in China
HARDWARE
16 - machine screws
6 - rubber bumpons
Missing hardware? Please call 800.606.6387 for replacements.
16 - shelf pins
4 - tube caps
TOOLS REQUIRED
Allen Wrench (included)
Hammer
A
B
x 2
C
1 A. Lay 1 side frame face down with the tube fittings
facing up, oriented as shown. Slide top rear rail and top front
rail over tube fittings. Make sure holes in rails and tube fittings
are aligned and face towards the inside.
B. Secure frames with 2 machine screws per rail using the
included allen wrench.
C. Insert 8 shelf pins into threaded holes in side frame and
secure with the allen wrench.
Customer Service 800-967-6696 | http://www.crateandbarrel.com
AIR WINE BAR TABLE
B
2 A. Attach bottom shelf to assembly with 2 machine
screws per rail, using same method outlined in Step 1.
B. Place shelves into positon, fitting open tubes of shelf ends
onto pins of side frame.
4 Insert 1 plastic tube cap onto bottom of each leg.
Secure into place by gently tapping with a hammer.
Made in China
A
Install at a slight angle,
inserting pins into shelves
one shelf at a time
3 Insert 8 shelf pins into remaining side frame and fit into
position. Install side frame at a slight angle, fitting pins into
shelves one at a time. Secure with 8 machine screws.
5 With the assistance of another adult, lift assembled frame into
an upright position. Remove adhesive backer and attach 6
bumpons. Install glass top, making sure each shelf is solidly
supported by the bumpons. Assembly is now complete.
CARE & CLEANING
Clean as needed with a damp cloth.
Page 2 of 2
Loading...