Crate & Barrel Add Black CD Wall Shelf, Add Maple CD Wall Shelf Assembly Instruction
ADD CD WALL SHELF
HARDWARE
Thank you for purchasing the Add CD Wall Shelf. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
16 - plastic
dowels
3 - drywall
anchors
Missing hardware? Please call 800.606.6387 for replacements.
3 - large
screws
3 - wall
anchors
(others)
3 - medium
screws
1 - glue
3 - small
screws
4 - connecting
bolts
TOOLS REQUIRED
Phillips head screwdriver
rubber mallet
1 - top horizontal
4 - end caps
2 - cleats
(1 - shelf, 1 - wall)
Made in Thailand R05 Page 1 of 4
1 - back
panel
2 - vertical
panels
Customer Service 800.967.6696 | www.crateandbarrel.com
panel
1 - bottom horizontal
panel
ADD CD WALL SHELF
A
NOTE: Wipe excess glue
with a damp cloth.
NOTE: Do not over
tighten the bolts.
B
1 A) Apply glue sparingly into holes provided on
end caps. Insert 4 plastic dowels into each panel.
Gently tap dowels with rubber mallet to secure.
Wipe excess glue with a damp cloth.
B) Insert 2 connecting bolts into vertical panels.
Secure bolts with a Phillips head screwdriver, but
do not over tighten.
2 Apply glue sparingly into holes provided on
vertical panels. Fit vertical panels into top cap and
bottom cap, by aligning holes with corresponding
plastic dowels. Gently tap assembled panels with
rubber mallet to secure.
A
4 A) Locate the assembled unit with 4 connecting
bolts on the vertical panels. Attach back panel to
3 Apply glue sparingly into holes provided on top
horizontal panel and bottom horizontal panel. Fit
side caps into top horizontal panel and bottom
horizontal panel. Gently tap assembled panels with
rubber mallet to secure.
Made in Thailand R05 Page 2 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
assembled unit as shown, by aligning the
corresponding holes with connecting bolts.
B) Use a Phillips head screwdriver, turn built-in
cams located on back panel clockwise until it
securely engages each connecting bolt.
B
Loading...