Thank you for purchasing the Abbott Two-Door
Cabinet. This page lists all the contents included in
the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely assemble this product.
ASSEMBLY HARDWARE
18 - wood
dowels
11 - bolts
3 - cam
screws
4 - shelf
pins
Missing hardware? Please call
800.606.6387 for replacements.
3 - cams18 - small
16 - large
screws
MOUNTING HARDWARE
1 - wall
strap
1 - wall
screw
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
screws
3 - cam
covers
COMPONENTS
1 - fixed shelf
1 - top panel1 - adjustable shelf1 - bottom panel1 - front frame
1 - back panel2 - side panels
(1 left, 1 right)
Made in China - r06Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 2
ABBOTT TWO-DOOR CABINET
A
A
5 A) With the assistance of another adult, carefully fit
dowels of front frame into corresponding holes of
assembled unit, and secure with 5 large screws per side
panel as shown.
B) With a screwdriver, turn each cam of bottom panel
clockwise until it securely engages each cam screw.
B
6 Attach back panel to assembled unit with 14 small
screws as shown, using a screwdriver.
A
A
B
B
7 A) With the assistance of another adult, position unit
upright as shown. Insert 4 wood dowels into top of
assembled unit as shown.
B) Insert 4 shelf pins at desired shelf heights.
B
A
B
A
B
NOTE: Do not over
tighten the bolts
8 A) Fit dowels of assembled unit into corresponding
holes of top panel. Secure front frame to top panel
with 3 bolts as shown,
B) Secure side panels to top panel with 4 bolts,
using a screwdriver. Do not over tighten the bolts.
Made in China - r06Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 3
ABBOTT TWO-DOOR CABINET
NOTE: Do not over
tighten the bolts
1 Insert 2 wood dowels into left and right side panels
as shown.
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
B
A
2 Fit dowels of left and right side panels into correĀsponding holes of fixed shelf as shown. Secure each
side panel with 2 bolts, using a phillips head screw-driver. Do not over tighten the screws.
NOTE: Do not over
tighten the cam screws
3 A) Attach bottom panel with 6 large screws as
shown.
B) Insert 3 cams into bottom panel as shown. Make
sure arrows on each cam point toward nearest edge
with holes.
Made in China - r06Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 Place front frame face down onto a clean, padded
surface as shown, and insert 10 wood dowels and 3 cam screws. Secure, but do not over tighten, cam screws
with a screwdriver.
Page 4
ABBOTT TWO-DOOR CABINET
9 Secure top of back panel to top panel with 4 small
screws as shown.
10 Place adjustable shelf into assembled unit as
shown. Make sure shelf is securely supported by each
shelf pin.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
Made in China - r06Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5
ABBOTT TWO-DOOR CABINET
NOTE: Insert screws 3/4"-1"
from the edge of the strap
WALL
OPTIONAL WALL MOUNTING ASSEMBLY
For added safety and stability, it is recommended
that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors
appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever
possible.
wall
strap
wall
screw
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
NOTE: If you are unsure about your wall
type or what mounting method you
should use, consult a qualified
professional or your local hardware store.
A. Insert wall screw (not included) through end of
wall strap and into wall as shown.
B. Insert wall screw (included) through end wall
strap and into the top back of unit as shown.
Mounting assembly is now complete.
Made in China - r06Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.