ABBOTT NIGHTSTAND
HARDWARE
Thank you for purchasing the Abbott Nightstand.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
COMPONENTS
10 - wood
dowels
14 - small
screws
Missing hardware? Please call 800.606.6387 for replacements.
11 - cam
screws
11 - cams
8 - large
screws
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
2 - side panels
(1 left, 1 right)
(1 left, 1 right)
Made in Vietnam - r04 Page 1 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - drawer back 1 - drawer front2 - drawer sides
1 - shelf 1 - back panel1 - top panel
1 - drawer bottom
1 - crossbar
ABBOTT NIGHTSTAND
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
NOTE: Do not over
tighten the cam screws
A
B
1 Insert 3 cam screws, 2 cams and 2 wood dowels
into left and right side panels as shown. Secure, but
do not over tighten cam screws with a phillips head
screwdriver. Make sure arrows on each cam point
toward nearest edge with holes.
left side
panel
2 A) Insert 4 cams and 4 wood dowels into shelf as
shown.
B) Insert 3 cams and 2 wood dowels into crossbar as
shown.
right side
panel
3 With the assistance of another adult, fit dowels of
4 Insert 5 cam screws into top panel as shown.
shelf and crossbar into corresponding holes of left
and right side panels as shown. With a screwdriver,
turn each cam clockwise until it securely engages
each cam screw.
Made in Vietnam - r04 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
ABBOTT NIGHTSTAND
NOTE: Do not over
tighten the screws
5 Position unit upright as shown. Fit dowels of assembly
into corresponding holes of top panel as shown. Secure
all cams.
6 Attach back panel to back of assembly with 14
small screws as shown. Secure, but do not over
tighten, screws with a screwdriver.
7 Attach left and right drawer sides to drawer front
with 4 large screws as shown, using a screwdriver.
Made in Vietnam - r04 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 Fit drawer bottom to into corresponding grooves
of drawer sides/front as shown.
ABBOTT NIGHTSTAND
9 Attach drawer back to drawer sides with 4 large
screws as shown.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
10 Fit drawer glides of drawer assembly into corresponding glides of nightstand as shown.
Assembly is now complete.
Made in Vietnam - r04 Page 4 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...