ABBOTT LOW CABINET
ASSEMBLY HARDWARE
Thank you for purchasing the Abbott Low Cabinet. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
19 - small
screws
4 - cam
screws
14 - large
screws
4 - cams
5 - crossbar
screws
Missing hardware?
Please call 800.606.6387 for
replacements.
16 - bolts 21 - wood
WALL MOUNTING HARDWARE
1 - wall strap 1 - small
wall screw
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
dowels
1 - top panel
2 - side panels
(1 left, 1 right)
Made in China - r02 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - front frame
1 - fixed shelf1 - crossbar
1 - back panel
1 - bottom panel
ABBOTT LOW CABINET
A
left and right
side panel
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
B
bottom panel
NOTE: Do not over
tighten the cam screws
front frame
1 A) Insert 5 wood dowels into left and right side
panels as shown.
B) Insert 4 cams into bottom panel as shown. Make sure
arrows on each cam point toward nearest edge with
holes.
NOTE: Do not over
tighten the bolts
fixed
shelf
2 With the assistance of another adult, place front frame
onto a clean, padded surface as shown. Insert 11 wood
dowels and 4 cam screws into front frame as shown.
Secure, but do not over tighten, each cam screw using a
phillips head screwdriver.
NOTE: Do not over
tighten the screws
bottom
panel
left side
panel
3 Fit dowels of left side panel into corresponding holes
of fixed shelf as shown. Secure left side panel to fixed
shelf with 3 bolts as shown, using a phillips head screw-
driver. Do not over tighten the bolts.
Made in China - r02 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 Fit dowels of left side panel into corresponding holes
of bottom panel as show. Secure left side panel to
bottom panel with 3 large screws as shown, using a
screwdriver.
ABBOTT LOW CABINET
right side
panel
B
fixed
shelf
A
B
bottom
panel
5 A) With the assistance of another adult, position
assembled unit as shown. Fit dowels of right side panel
into corresponding holes of fixed shelf and bottom panel
as shown. Secure right side panel to fixed shelf with 3
bolts, using a screwdriver.
B) Secure right side panel to bottom panel with 3 large
screws, using a screwdriver.
NOTE: If doors are not aligned,
see Hinge Adjustment
Instructions
top panel
B
A
front frame
6 A) With the assistance of another adult, fit dowels of
front frame into corresponding holes of assembled unit
as shown. Using a screwdriver, turn each cam clockwise
until it securely engages each cam screw.
B) Secure left and right side panels to front frame with
4 large screws per side as shown, using a screwdriver.
back panel
7 With the assistance of another adult, position unit
upright. Fit dowels of left and right side panels into
corresponding holes of top panel. Secure top panel to
assembled unit with 10 bolts as shown, using a
screwdriver.
Made in China - r02 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 Attach back panel to assembled unit with 19 small
screws, using a screwdriver.
ABBOTT
LOW CABINET
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
crossbar
9 Fit crossbar into assembled unit and secure with 5
crossbar screws as shown, using a screwdriver.
Assembly is now complete.
HINGE ADJUSTMENT
If the doors do not appear square or aligned,
loosen or tighten the appropriate screws on
each case hinge as illustrated.
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise.
A
B
A
B
3) Height adjustment:
Loosen screw C, adjust
door height and retighten screw C.
C
C
3
1
Made in China - r02 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2
Page 4 of 5
ABBOTT
LOW CABINET
OPTIONAL WALL MOUNTING
INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert small wall screw (included) through end wall strap and
into the top back of unit as shown.
B. Insert large wall screw (not included) through end of wall strap
and into wall as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
NOTE: Insert screws 3/4"-1"
from the edge of the strap
WALL
small wall
screw
wall
strap
3/4”-1”
large
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
Made in China - r02 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5 of 5
Loading...