Crate & Barrel Abbott Four-Drawer Chest Assembly Instruction
ABBOTT FOUR DRAWER CHEST
ASSEMBLY HARDWARE
Thank you for purchasing the Abbott Four Drawer
Chest. This page lists the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
BOX 1
dowels
16 - cam
screws
Missing hardware?
Please call 800.606.6387 for replacements.
32 - small
screws
32 - large
screws
WALL MOUNTING HARDWARE
1 - wall strap
1 - wall screw
1 - washer
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
16 - cams14 - wood
1 - top
panel
2 - back
panels
2 - side panels
(1 left, 1 right)
1 - top
crossbar
2 - crossbars
(1 front, 1 back)
1 - bottom panel
COMPONENTS
BOX 2
4 - drawer backs4 - drawer fronts 8 - drawer sides
Made in Vietnam - r04 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
(4 left, 4 right)
4 - drawer bottoms
ABBOTT FOUR DRAWER CHEST
NOTE: Do not over
tighten the cam screws
A
top panel
B
bottom panel
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
1 A) Insert 6 cam screws into top panel as shown. Secure,
but do not over tighten, cam screws using a phillips head
screwdriver.
B) Insert 4 wood dowels and 4 cams into bottom panel as
shown. Make sure arrows on each cam point toward nearest
edge with holes.
right side panel
left side panel
2 Insert 5 cam screws and 2 cams into left and right side
panels as shown.
A
top crossbar
B
front and back
crossbars
3 A) Insert 2 wood dowels and 4 cams into top crossbar
as shown.
B) Insert 2 wood dowels and 2 cams into front and back
crossbars as shown.
right side panel
A
front
crossbar
top
bottom
panel
back
crossbar
crossbar
B
left side panel
4 A) Fit dowels of bottom panel, front crossbar, back
crossbar and top crossbar into corresponding holes of left
side panel as shown. Using a phillips head screwdriver,
turn each cam clockwise until it securely engages each cam
screw.
B) Fit dowels of assembled unit into corresponding holes of
right side panel as shown. Secure all cams.
Made in Vietnam - r04 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...