Crate & Barrel Abbott 65 Plasma Panel Assembly Instruction

ABBOTT PLASMA BACK PANEL

Thank you for purchasing the Abbott Plasma Back
Panel. This page lists all the contents included in the

box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY HARDWARE

16 - bolts

MOUNTING ASSEMBLY HARDWARE

1 - wall strap 1 - large

screw

Missing hardware? Please call 800.606.6387 for replacements.

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

COMPONENTS

1 - back
panel

2 - connecting brackets

1 - media
stand

ASSEMBLY

1 A) With the assistance of another adult, place back panel face down
onto a clean, padded surface as shown. Attach 2 connecting brackets to
back panel with 4 bolts per bracket. Secure, but do not over tighten,
bolts with a phillips head screwdriver.
B) With the assistance of another adult, position unit upright. Position
back panel onto media stand as shown, and attach with 4 bolts per
bracket.

back panel

A

NOTE: Do not over
tighten the bolts

media stand

B

(sold separately)

back panel

Made in China - r01 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ABBOTT PLASMA BACK PANEL

NOTE:
Wall mounting hardware is not
included. The plasma back
panel is intended for placement
against a wall. If you are unsure
about your wall type or what
mounting method you should
purchase, consult a qualified
professional or your local
hardware store. It is important
that you use the wall anchor
appropriate for your wall type.

2 C) Insert 1 large screw through
wall strap and into unit as shown.
A) If possible, fasten wall strap to a
wall stud. If not, drill a hole in the wall
slightly smaller than the diameter of a
hollow wall anchor (not included).
Lightly tap with a hammer until the face
is flush with the wall.
C) Insert 1 wall screw (not included)
through wall strap and into the wall
anchor.
Assembly is now complete.

Wall

Wall
strap

wall
anchor
(not included)

large
screw

wall
screw
(not
included)

NOTE: Insert screws 3/4"-1"
from the edge of the strap

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.

Made in China - r01 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

NOTE: Contact your television manufacturer to
purchase the necessary wall mounting bracket
needed to safely mount your TV to the back
panel.