ABBOTT MEDIA STAND
ASSEMBLY HARDWARE
Thank you for purchasing the Abbott Media Stand. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - small
screws
6 - cams
56 - large
screws
6 - cam
covers
18 - bolts 22 - wood
dowels
Missing hardware?
Please call 800.606.6387 for
replacements.
WALL MOUNTING HARDWARE
1 - wall strap 1 - wall screw
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
6 - cam
screws
1 - top panel
2 - side panels
(1 left, 1 right)
1 - top
partition
Made in China - r12 Page 1 of 6
1 - middle
panel
1 - bottom
partition
2 - drawer
back panels
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - small drawer
front panels
1 - bottom
panel
4 - drawer
side panels
2 - large drawer
front panels
1 - back panel
1 - leg
2 - drawer
bottom panels
ABBOTT MEDIA STAND
NOTE: Do not over
tighten the cam screws
A
A
left and right
side panel
B
top panel
1 A) Insert 4 wood dowels and 3 cam screws into left
and right side panels as shown. Secure, but do not over
tighten, cam screws using a phillips head screwdriver.
B) Insert 8 wood dowels into top panel as shown.
top
partition
bottom
partition
B
middle panel
2 A) Insert 4 wood dowels into bottom partition as
shown.
B) Insert 2 wood dowels into middle panel as shown.
NOTE: Make sure partitions
are oriented during assembly
as shown
middle panel
bottom
partition
NOTE: Do not over
tighten the screws
3 Fit dowels of middle panel into corresponding holes
of top partition as shown. Secure with 4 large screws
using a screwdriver. Do not over tighten the screws.
Made in China - r12 Page 2 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 Fit dowels of middle panel into corresponding holes
of bottom partition as shown. Secure with 3 bolts using
a phillips head screwdriver.
NOTE: Do not over
tighten the bolts
ABBOTT MEDIA STAND
bottom
panel
leg
5 Fit dowels of bottom partition into corresponding
holes of bottom panel. Secure with 4 large screws as
shown.
A
A
B
left side
panel
C
6 Attach leg to bottom panel of assembly. Turn leg
clockwise to secure.
right side
panel
NOTE: Make sure arrows on
each cam point toward nearest
edge with holes
7 A. Fit dowels of left and right side panels into
corresponding holes of assembled unit as shown and
secure each side with 3 bolts.
B.Insert 6 cams into bottom panel as shown. Make
sure arrows on each cam point toward nearest edge
with holes.
C. Using a screwdriver, turn each cam clockwise until
it securely engages each cam screw.
Made in China - r12 Page 3 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
ABBOTT
MEDIA STAND
top panel
VIEW FROM
BELOW
NOTE: A short screwdriver is
recommended to tighten small
bolts during this assembly. Do
not over tighten bolts.
8 With the assistance of another adult, carefully position unit
upright. Fit dowels of top panel into corresponding holes of
assembled unit. Secure top panel to assembled unit with 9
bolts as shown, using a screwdriver.
back panel
9 With the assistance of another adult, position unit face
down as shown. Attach back panel to assembled unit with
16 large screws as shown.
A
drawer
drawer
back panel
small drawer
front panel
bottom
panel
B
10 A) Attach drawer side panel to drawer back panel
and small drawer front panel with 6 large screws as
shown.
B) Slide bottom panel into corresponding grooves of
assembled drawer unit.
side panel
drawer
side panel
11 Attach drawer side panel to assembled unit with 6
large screws as shown.
Made in China - r12 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 4 of 6
ABBOTT
MEDIA STAND
large drawer
front panel
12 Attach large drawer front panel to assembled unit
with 4 large screws as shown. Repeat steps 11-13 for
remaining drawer assembly.
B
C
B
14 A) Position drawer assembly and rest the drawer
assembly on top of the tabs as shown. Attach each glide
to drawer with 3 small screws as shown. Secure with a
screwdriver. Repeat steps for remaining drawer assembly.
B) Conceal all exposed cams with cam covers.
Assembly is now complete.
13 Fully extend drawer glides from assembled
unit as shown.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
Made in China - r12 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5 of 6
ABBOTT
MEDIA STAND
OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert wall screw (not included) through end of wall strap and
into wall as shown.
B. Insert wall screw (included) through end wall strap and into the
top back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
NOTE: Insert screws 3/4"-1"
from the edge of the strap
wall
strap
wall
screw
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
WALL
Made in China - r12 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 6 of 6
Loading...