Crate & Barrel Abbott 52 Back Panel Assembly Instruction

ABBOTT 52” PLASMA MOUNTING PANEL

HARDWARE

16 - bolts

Missing hardware?
Please call 800.606.6387 for replacements.

WALL MOUNTING HARDWARE

Thank you for purchasing the Abbott 52” Plasma
Mounting Panel. This page lists all the contents

included in the box. Please take time to identify the
hardware as well as the individual components of this
product. As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to protect
them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

1 - back panel
assembly

1 - wall
strap

1 - wall
screw

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

back panel
assembly

NOTE: Do not over
tighten the bolts

mounting
bracket

1 - media stand
assembly (sold separately)

media stand assembly
(sold separately)

1 With the assistance of another adult, place back panel
2 - mounting
brackets

assembly onto media stand assembly as shown. Attach 2

mounting brackets to back panel assembly and media

stand assembly with 8 bolts per bracket as shown.

Secure, but do not over tighten the bolts, using a phillips

head screwdriver.

Assembly is now complete.

Made in China - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ABBOTT

52” PLASMA MOUNTING PANEL

SAFETY MOUNTING INSTRUCTIONS

This plasma mounting panel is intended for placement against a
wall using the enclosed anchoring hardware. The included
hardware is for mounting the unit to drywall. Use hardware
appropriate to your wall type.

For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.

A. Insert wall screw (not included) through end of wall strap and
into wall as shown.
B. Insert wall screw (included) through end wall strap and into the
top back of unit as shown.

Mounting assembly is now complete.

NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.

NOTE: Insert screws 3/4"-1"
from the edge of the strap

wall
strap

wall
screw

wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)

WALL

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture wax
or polish as the wood is finished with a protective
clear lacquer.

Made in China - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

NOTE: Contact your television manufacturer to
find out the necessary wall mounting bracket and
instructions needed to safely mount your TV.
Crate and Barrel drivers are not authorized to
mount your TV.