ABBOTT CORNER MEDIA STAND
ASSEMBLY HARDWARE
Thank you for purchasing the Abbott Corner Media
Stand. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
14 - small
screws
4 - cams
23 - large
screws
8 - shelf
pins
11 - bolts 19 - wood
dowels
Missing hardware?
Please call 800.606.6387
4 - cam
covers
for replacements.
WALL MOUNTING HARDWARE
1 - wall
strap
1 - wall
screw
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
4 - cam
screws
1 - bottom
panel
2 - side panels
(1 left, 1 right)
2 - corner
back panels
Made in China - r07 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - partition 2 - adjustable
shelves
1 - leg
1 - front frame1 - top panel
1 - back panel
ABBOTT CORNER MEDIA STAND
NOTE: Do not over
tighten the cam screws
front frame
partition
left and right
side panel
A
B
1 Carefully place front frame onto a clean, padded
surface. Insert 11 wood dowels and 4 cam screws into
front frame as shown. Secure, but do not over tighten,
cam screws using a phillips head screwdriver.
NOTE: Make sure arrows on
each cam point toward nearest
edge with holes
bottom
panel
2 A) Insert 6 wood dowels into partition as shown.
B) Insert 1 wood dowel into left and right side panels as
shown.
NOTE: Do not over
tighten the screws
A
partition
bottom
panel
B
3 Insert 4 cams into bottom panel as shown. Make sure
arrows on each cam point toward nearest edge with
holes.
4 A) Fit dowels of partition into corresponding holes of
bottom panel as shown.
B) Secure partition to bottom panel with 4 large screws
using a phillips head screwdriver. Do not over tighten
the screws.
Made in China - r07 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
ABBOTT CORNER MEDIA STAND
left side
panel
5 With the assistance of another adult, position unit as
shown. Attach left and right side panels to assembled
unit with 4 large screws, using a screwdriver.
front frame
6 With the assisntace of another adult, place front
frame face down as shown. With the assistance of
another adult, fit dowels of front frame into
corresponding holes of assembled unit as shown. Secure
front frame to bottom panel by turning cams clockwise
until they securely engage each cam screw, using a
screwdriver.
leg
7 Secure front frame to left and right side panels with
4 large screws per side as shown, using a screwdriver.
Made in China - r07 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 Attach leg to bottom panel of assembly. Turn leg
clockwise to secure.
ABBOTT
back
panel
CORNER MEDIA STAND
corner back
panel
B
9 Attach back panel to assembled unit with 3 large
screws as shown. Secure using a screwdriver.
top panel
corner back
panel
B
A
NOTE: Make sure holes
of side panels are positioned
as shown
10 A) Fit 2 corner back panels into corresponding groove of
left and right side panels as shown.
B) Secure each corner panel to assembled unit with 5 small
screws using a screwdriver.
11 A) Place asembled unit upright. With the assistance of
another adult, fit dowels of assembled unit into corresponding holes of top panel as shown. Secure top panel
to front frame with 4 bolts as shown, using a screwdriver.
Do not over tighten the bolts.
B) Secure top panel to partition with 3 bolts as shown.
C) Secure top panel to left and right side panels with 2
bolts per side as shown.
C
B
A
A
B
C
NOTE: Do not over
tighten the bolts
Made in China - r07 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 4 of 5
ABBOTT
CORNER MEDIA STAND
shelf pin
A
A
adjustable
shelf
B
12 A) Insert 8 shelf pins into assembled unit at desired
shelf heights.
B) Place 2 adjustable shelves onto shelf pins as shown.
Make sure shelves are securely supported by each shelf
pin.
C) At this point, cover all exposed cams with cam covers.
corner
back panel
B
A
back panel
corner
back panel
13 A) Secure corner back panels to top panel with 4
small screws as shown.
B) Secure back panel to top panel with 4 large screws
as shown.
Assembly is now complete.
SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert wall screw (not included) through end of wall strap and
into wall as shown.
B. Insert wall screw (included) through end wall strap and into the
top back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is finished
with a protective clear lacquer.
NOTE: Insert screws 3/4"-1"
from the edge of the strap
wall
strap
wall
screw
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
WALL
Made in China - r07 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5 of 5
Loading...