Crate Amplifiers V18-212, V18-112 User Manual

4 (1)
Crate Amplifiers V18-212, V18-112 User Manual

V18-112

V18-212

Tube Guitar Amplifier with Reverb

Owner’s Manual

V18-112/V18-212 Tube Guitar Amplifier with Reverb

TABLE OF CONTENTS

 

Introduction ..........................................................................

3

The Front Panel ....................................................................

4

The Rear Panel .....................................................................

5

Important Information About Tubes and Tube Products ............

6

A Brief History of Tubes ..................................................

6

Tube Types and Usage....................................................

6

The Nature of Tubes: Why (and When) to Replace Them ....

7

The Importance of Proper Biasing....................................

8

Survival Tips for Tube Amplifiers ......................................

9

System Block Diagram ........................................................

10

Service Information .............................................................

11

Technical Specifications.......................................................

12

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

PRECAUCION

RIESGO DE CORRIENTAZO

NO ABRA

PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS O DESCARGAS ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO A LA LLUVIA O LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO. NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.

ATTENTION

RISQUE D'ELECTROCUTION

NE PAS OUVRIR

ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.

IMPORTANT SAFETY INSTRUCTIONS

READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.

DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR PROPER OPERATION, THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR FLOW PROVISIONS IN THE CABINET.

DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.

CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.

ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.

PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.

UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.

ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR SAFE OPERATION AND TO AVOID INJURY.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.

OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.

WARNING: THIS UNIT REQUIRES A SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRIC CODES HAVING THE LINE SUPPLY VOLTAGE, POWER, AND FREQUENCY IDENTIFIED ON THE REAR OF THE UNIT. THE OUTLET MUST REMAIN

ACCESSIBLE TO DISCONNECT THE UNIT IF A FAULT SHOULD ARISE WHILE IN USE. THIS UNIT SHOULD BE UNPLUGGED WHEN NOT IN USE.

EXPLANATION OF GRAPHICAL SYMBOLS:

"DANGEROUS VOLTAGE"

EXPLICACION DE SIMBOLOS GRAFICOS:

= “VOLTAJE PELIGROSO”

EXPLICATION DES SYMBÔLES GRAPHIQUES:

"DANGER HAUTE TENSION"

"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL" “ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.” "REFERREZ-VOUS AU MANUAL D'UTILISATION"

2

V18-112/V18-212 Tube Guitar Amplifier with Reverb

Introduction

Congratulations! You are now the proud owner of a Crate V18-112 or V18-212 tube guitar amplifier. This combo amplifier packs a whole lot of vintage tube sound and classic spring reverb into its compact cabinet, providing you with an amp that is portable and easy to operate, yet still produces incredible sounds!

The V-Series amps offer the versatility required for many different musical styles, and have the unique tonal purity of a hot-rodded tube amp. The V18-112 and V18-212 are single-channel amplifiers with gain and master volume controls, treble/mid/bass tone controls, and an internal spring reverb. They crank out 18 watts from a pair of EL84 tubes into either one (V18-112) or two (V18-212) internal speakers.

Like all Crate products, your V18 amplifier is designed by musicians and built using only the best components. Each amplifier is tested to confirm that it meets our specifications, and we believe that this amplifier is the absolute best that it can be.

In order to get the most out of your new amplifier, please read this manual before you begin playing.

And thank you for choosing Crate.

Here are some of the features packed into your new V18 Combo Amplifier:

Two EL84 power vacuum tubes for smooth overdrive sound

18 watts rms power output

V18-112: 1 x 12" ceramic speaker

V18-212: 2 x 12" ceramic speakers

Line output for connecting to a mixer or recorder

3-band EQ

Reverb control

3

V18-112/V18-212 Tube Guitar Amplifier with Reverb

The Front Panel

 

 

G A I N

 

 

L E V E L

 

T R E B L E

 

 

M I D D L E

 

 

B A S S

 

R E V E R B

 

 

 

4

5

 

4

5

 

4

5

 

4

5

 

4

5

 

4

5

 

 

 

6

 

6

 

6

 

6

 

6

 

6

O N

O N

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

7

3

 

7

3

 

7

3

 

7

3

 

7

3

 

 

7

 

 

2

8

2

 

8

2

 

8

2

 

8

2

 

8

2

 

 

8

 

 

1

9

1

 

9

1

 

9

1

 

9

1

 

9

1

 

 

9

 

I N P U T

0

1 0

 

0

1 0

 

0

1 0

 

0

1 0

 

0

1 0

 

0

1 0

S T A N D B Y

P O W E R

1 2 3 4 5 6 7 8 9 10

1.INPUT: Use this jack to connect your guitar to the amplifier using a shielded instrument cable.

2.GAIN: Use this to adjust the gain for the channel’s Overdrive. With the control turned counter-clockwise, the gain is low and very little distortion is present. As you rotate it clockwise, the gain increases, producing more overdrive distortion, and a higher output volume level.

3.LEVEL: Use this to adjust the overall output level.

4.TREBLE: Use this to adjust the output level of the high frequencies. The adjustment range is 12 dB at 6 kHz.

5.MIDDLE: Use this to adjust the output level of the mid frequencies. The adjustment range is 10 dB at 1 kHz.

6.BASS: Use this to adjust the output level of the low frequencies. The adjustment range is 8 dB at 150 Hz.

7.REVERB: Use this to adjust the amount of reverb. Fully counter-clockwise is “dry” (no reverb). Rotate clockwise to increase the amount of reverb.

8.LAMP: This illuminates when the amplifier is turned on.

9.ON/STANDBY Switch: Use this switch to activate the amplifier after the On/Off switch (14) is turned on.

Always turn this switch OFF first, and ON last! Turn the On/Off switch (10) on at least 30 seconds before turning on the standby switch.

During short breaks, you should turn this switch off, and leave the On/Off switch on. This will help prolong the life of the amplifier tubes.

10.ON/OFF SWITCH: Use this switch to turn the amplifier on and off.

Always turn this switch ON first and OFF last! Turn the Standby switch (9) on at least 30 seconds after turning on the On/Off switch.

4

Loading...
+ 8 hidden pages