Crate Amplifiers BFX100T User Manual
BFX100T
Congratulations!
Y ou are now the proud owner of the professional, transportable Crate BFX100T
Bass Amplifier with Digital Signal Processing. The BFX100Toffers a wide selection
of digital effects designed specifically for the bass guitar, each of which are easily
accessed with a simple turn of a control knob. The BFX100T features an extended
range low frequency driver, a dome tweeter, an extremely clean power amp, and
an 8-band graphic equalizer. The balanced line out jack has a level control for precisely matching the signal to a recording console or house P Asystem, and is selectable for either pre or post EQ. The built-in limiter ensures pure, clean power even
at its full 100 watts output. An effects loop, a jack for headphones, and a jack for
an external speaker add to the overall versatility of the amplifier. The compact cabinet features heavy duty recessed side handles, recessed rear wheels, removable
tilt-back support peg and retractable luggage style roll-around handle.
Like all Crate products, your BFX100T is designed by musicians, and built
using only the best components. Extensive testing confirms that this amplifier is the
absolute best it can be.
In order to get the most out of your new amplifier, we strongly urge you to read
the information contained in this manual before you begin playing.
And thank you
for choosing
Professional,
Transportable
Bass Amplifier
with
Digital Signal
Processing
IMPORTANT SAFETY INSTRUCTIONS
• READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
• DO NOT OPERATE NEAR ANY HEATSOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS.
• DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
• CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
• ONLY CONNECT POWER CORD TO APOLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND
COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
• PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
• UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
• ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BYTHE MANUFACTURER FOR SAFE OPERA-
TION AND TO AVOID INJURY.
• THIS APPARATUS DOES NOT OPERATE NORMALLY AND REQUIRES SERVICE WITH ANY PHYSICAL DAMAGE FROM IMPACT OR
ANY EXPOSURE TO MOISTURE.
• SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
• OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND
PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS OPERATED ATHIGH VOLUME.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:
"DANGEROUS VOLTAGE"
“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"
=
=
PRECAUCION
RIESGO DE CORRIENTAZO
NO ABRA
ADVERTENCIA: REDUCIR EL RIESGO DE FUEGO O CHOQUE ELÉCTRICO, NO LE EXPONE DE ESTE APARATO A LLUVIA O HUMEDAD. PARA
DISMINUOIR EL RIESGO DE CORRIENTAZO. NO ABRA LA CUBIERTA.
NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO REPARAR DEJE
TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.
ATTENTION
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE.
AUCUNE PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR
TOUTE REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.
Table of Contents:
Using the Transport Handle . . . . . . . . . . . . . . . . . . . . . .3
Using the Tilt-Back Peg . . . . . . . . . . . . . . . . . . . . . . . . . .3
The Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,5
The Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Suggested Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Technial Specifications . . . . . . . . . . . . . . . . . .back cover
BFX100T
Professional, Transportable Bass Amp with DSP
2
Using the Transport Handle:
(1) Squeeze the handle together just below the attachment bracket
(2) Lift the lower end of the handle up and out in an arcing motion
(3) Lock the handle into the attachment bracket in its upright position
(Reverse the steps to put the handle away)
Using the Tilt-Back Peg:
(1) Lift the tilt-back peg up and out of its retaining clips
(2) Screw the threaded end of the tilt-back peg into the fitting on the rear of the cabinet
The cabinet may now be used as a personal monitor – tilting it back also increases its range of coverage
(Remove the peg from the fitting and store it in its retaining clips when not in use)
LIFT
SQUEEZE
1
2
LOCK
3
BFX100T
Professional, Transportable Bass Amp with DSP
3
LIFT UP,
PULL OUT
SCREW INTO
FITTING
2
1
Loading...