Crane H05-GPS-6A, H05-GPS-6B, H05-GPS-6C User Manual

Bluetooth® GPS Watch
with Heart Rate
Measurement

User Manual

Spend a little Live a lot.

ID: #05007

m

y

h

a

n

s

e

c

o

n

t

r

o

l

.

c

o

m

M

A

N

U

A

L

D

E

V

E

L

O

P

E

D

I

N

G

E

R

M

A

N

Y

User-friendly

Manual

QR codes take you where you want to go
quickly and easily

Whether you require product information, spare parts or accesso­ries, details on warranties or aftersales services, or if you want to

watch a product demonstration video, our QR codes will take you
there in no time at all.

What is a QR code?

A QR code (QR = Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.

Advantage: You do not need to manually enter a website address or
contact details.

This is how it works

To scan the QR code, all you need is a smartphone with QR code rea­der software and an internet connection*. This type of software can
be downloaded for free from your app store.

Try it out now

Just scan the QR code with your smartphone and
find out more about the Aldi product you have
purchased.*

Your Aldi Service Portal

All details mentioned above can also be found in
the Aldi Service Portal at www.aldi.co.uk.

* Depending on your tarif plan you may be charged for the connection.

et connecti

from your

Dok./Rev.-Nr. 92989_20150302 neu

Overview .............................................................................4

Use ........................................................................................5

Scope of delivery/device parts ..........................................6

General information ...........................................................7

Reading and storing the instruction manual ...................7

Explanation of symbols .........................................................7

Checking the GPS watch and product contents ..............9

S

afety

...................................................................................9

Proper use ...............................................................................9

Safety notes ...........................................................................10

Water-resistance ...................................................................16

Start-up ............................................................................. 18

Charging the battery pack of the GPS watch ..................18

Chest strap ............................................................................20

Bike holder ............................................................................ 22

Downloading and installing the Crane Connect app ... 23

General information about GPS ........................................ 24

Operation ..........................................................................27

Turning the GPS watch on and off .................................... 27

Locking keys ......................................................................... 27

Illumination of the display panel ......................................28

GPS watch modes ................................................................29

System setting mode ..........................................................30

Time mode ............................................................................ 37

Workout mode with GPS ..................................................... 37

Interval mode with GPS ...................................................... 42

History mode ........................................................................45

Alarm mode ..........................................................................48

Data transfer .........................................................................49

Cleaning and maintenance ............................................. 50

Changing the transmitter unit’s battery ..........................51

Storage ..............................................................................53

T

roubleshooting

.............................................................. 54

Technical data .................................................................. 58

Declaration of conformity ..................................................59

Disposal .............................................................................59

Disposing of the packaging ...............................................59

Disposing of old devices .....................................................60

Warranty ........................................................................... 61

W

arranty Card

......................................................................6

1

Warranty conditions ........................................................... 62

Contents

S wa

..............

he display

des

A

B C

1

2

3

4

5

6

16
17

20

19

18

15

22

23

21

24

14

13

9

11

10

12

7

8

4

GB IRE

V1

2 2 211 25

7

7 8

D

F

H

E

G

KRIPPL-WATCHES
WARENHANDELS GMBH
MARIA-THERESIA-STR. 41
4600 WELS, AUSTRIA
SERIAL NO.: PO7044
MODEL NO.: HO5-GPS-6A
TYPE: D92J63
EAN: 20023898
BLUETOOTH ID: D024216
PLU: 92412
3 BAR WATER RESISTANT
1 X 3.7 V 24mA

06/2015

36

5

GB IRE

V1

7

6

GB IRE

Product contents⁄device parts

1

GPS watch

2

USB connector cable

3

Cleaning brush

4

Bike holder

5

Cable strap for

4

6

Fixing plate for

4

7

Chest strap

8

Transmitter unit

9

ST./STP key (start/stop)

10

VIEW key

11

LAP/RESET key

12

MODE key

13

Display panel

14

LIGHT key (light)

15

Top row

16

GPS icon

17

Heart rate icon

18

Centre row

19

Bottom row

20

Battery charging level
icon

21

L icon (lap)

22

Heart rate icon

23

P icon (12 h time format)

24

Workout icon

25

Charging contacts

23

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

General information

GBIRE

7

General information

Reading and storing the instruction
manual

This instruction manual accompanies this
Bluetooth® GPS “Watch with Heart Rate Meas­urement”. It contains important information on

start-up and handling.
For improved readability, the Bluetooth® GPS watch with

heart rate measurement will be referred to below merely
as the “GPS watch” below.

Before using the GPS watch, please read through the
instruction manual carefully. This particularly applies for
the safety notes. Failure to comply with the instruction
manual may result in damage to the GPS watch and
falsified workout results.

The instruction manual is based on the standards and
rules in force in the European Union. When abroad, you
must also observe country-specific guidelines and laws.

Store the instruction manual and packaging for future
use. If you pass the GPS watch on to third parties, please
be absolutely sure to include this instruction manual.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

General information

GB

8

Explanation of symbols

The following symbols and signal words are used in
this instruction manual, on the GPS watch or on the
packaging.

WARNING!

WARNING! This signal word designates a hazard with

moderate degree of risk which may lead to death or
severe injury if not avoided.

CAUTION!

CAUTION! This signal word designates a hazard with low risk

that, if not avoided, may result in minor or moderate injury.

NOTICE!

NOTICE! This signal word warns against potential

damages to property.

This symbol provides you with useful
supplementary information on assembly or
operation.

Declaration of conformity (see chapter
“Declaration of conformity”): Products
marked with this symbol fulfil the require­ments of the EC directives.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Safety

GBIRE

9

Checking the GPS watch and product
contents

1. Carefully take the GPS watch and its accessories out
of the packaging.

2.

Remove the packaging material and all pr

otective

wrapping.

3.

Check to make sure that the delivery is complete

(see fig. A).

4.

Check whether the GPS watch or the individual parts

exhibit damages. If this is the case, do not use the
GPS watch. Contact the manufacturer via the service
address indicated on the warranty card.

Safety

Proper use

The GPS watch has a navigation system. The US “GPS”
satellite network orbiting the earth can be used to
determine the position of the user. This can be done any
time and anywhere in the world when outdoors.

The GPS watch primarily serves to measure distance,
speed and altitude and is particularly suitable for sports
like running, cycling, hiking, sailing, skiing etc.

However, the GPS watch is not suitable for demanding
applications such as paragliding, skydiving or gliding.

The GPS watch is designed for private use and is not
suitable for commercial use.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Safety

GB

10

The GPS watch can also be used as a workout aid for
measuring and displaying your heart rate. The
GPS watch is not a medical device.

Only use the GPS watch as described in this instruction
manual. Any other use is considered improper and may
result in damage to property.

The manufacturer or vendor accepts no liability for
damage caused by improper or incorrect use.

Safety notes

WARNING!

Risk of accident/injury!

Do not use the GPS watch when you are driv­ing a vehicle. Looking away from the road is
dangerous and may cause an accident; you
or other persons could be injured as a result.

− Stop or let a passenger perform the
settings.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Safety

GBIRE

11

WARNING!

Health hazard!

The GPS watch is not a medical device; it is
a workout aid for measuring and displaying
your heart rate.

− Always consult a physician before you
start a regular workout routine.

− Persons with pacemakers may only use
devices for measuring heart rate in
consultation with their physician.

− Do not use the chest strap if you are
allergic to latex. The chest strap may
contain latex constituents and cause
irritation and reddening of your skin.

− Batteries may pose a risk to health if
ingested. You should therefore store the
battery and the chest strap so that they
are not accessible for small children. If a
battery has been swallowed, you must
seek immediate medical attention.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Safety

GB

12

− Promptly remove an empty battery from
the chest strap. Otherwise it could leak.
In this case, avoid contact with skin,
eyes or mucus membranes. In the event
of contact with battery acid, immediately
flush the applicable areas with plenty
of clean water and consult a physician
promptly.

WARNING!

Danger for children and persons with
impaired physical, sensory or mental
capacities (e.g. partially disabled persons,
older persons with reduced physical and
mental capacities) or lack of experience
and knowledge (e.g. older children).

− The GPS watch may be used by children
ages eight and over as well as persons
with impaired physical, sensory or
mental capacities or those lacking expe­rience and knowledge if they are super­vised or have been instructed in how
to safely use the GPS watch and have
understood the risks associated with
using it.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Safety

GBIRE

13

− Children may not play with the GPS
watch. Cleaning and user maintenance
must not be performed by unsupervised
children.

− Keep children under the age of eight
away from the GPS watch and the acces­sories.

− Do not allow children to play with the
packaging wrapper. They could swallow
it and suffocate.

WARNING!

Risk of explosion and fire!

Lithium battery packs and batteries could
explode if handled improperly.

− Your GPS watch is operated with a lithium
polymer battery pack, which you cannot
replace.

− You may not heat, open or short circuit
battery packs and batteries or dispose of
them in fire. Do not drill through the GPS
watch.

− To avoid overheating the battery pack,
do not expose the GPS watch to direct
sunlight or other heat sources, e.g. in a
vehicle.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Safety

GB

14

− Only use the enclosed charging cable
and a USB port on your PC or a USB
charger to charge the battery pack in
the GPS watch.

− Never charge the battery pack at tem­peratures below +10°C! This will dam­age the chemical composition of the cell
and may result in a fire.

− Only replace the battery for the chest
strap transmitter unit with an equiva­lent battery type (CR2032).

− Do not attempt to charge the battery or
reactivate it with other means.

NOTICE!

Risk of damage!

Improper handling of the GPS watch may
damage the GPS watch.

− Do not place any objects on the GPS
watch and do not apply pressure to the
display panel. Otherwise the display
panel could break.

− Avoid contact between the display pan­el and angular objects.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Safety

GBIRE

15

− Avoid very strong magnetic fields
(e.g. transformers). Otherwise, they
could cause inconsistencies in meas­uring time and positioning. Failure to
observe these notes may result in faults
or damage to your GPS watch.

− For optimal battery pack power, avoid
deep discharges. Charge the battery
pack when only one bar is visible on the
battery pack indicator.

− Do not overcharge the battery pack.
Connecting a charged or partially
charged battery pack several times may
overcharge it and damage the cells.

− Do not leave the battery pack connected
to the charger for several days.

− Never open the housing of the GPS
watch or chest strap, it does not contain
any parts requiring maintenance (only
the battery must be changed; see section
“Changing the battery”).

− Only parts that comply with the original
device data may be used for repairs.
Electrical and mechanical parts, which
are essential for providing protection
against sources of danger, are located in
this device.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Safety

GB

16

− Liability

and warranty claims are waived
in the event of repairs performed by the
user, improper connection of the device
or incorrect operation.

Water-resistance

The GPS watch is water-resistant up to 3 bar; the chest
strap is splash-proof.

Refer to the table below to determine the level of
water-resistance for your GPS watch and appropriate
use. The bar value refers to air overpressure that was
applied to test water-resistance (DIN 8310).

Water
resistant
up to

Rain,
splashes

Washing
hands

Shower-
ing

Bathing,
swim­ming

Water
sports

n/a

1

Yes No No No No

3 bar

1

Yes Yes No No No

1) The watch withstands a pressure of 3 bar for a limited amount of
time.

Shower

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Safety

GBIRE

17

NOTICE!

Risk of damage!

− Do not immerse the GPS watch or the
transmitter in water or other liquids.

− Do not press the keys when the GPS
watch is wet. Otherwise, water could
penetrate the housing and damage the
clockwork.

− Keep in mind that salt and thermal water
may cause metal parts to corrode.

− It is recommended that you do not wear
the watch in a sauna or in the shower as
differences in temperature may cause
condensation to form, which could
damage the clockwork.

− Peak pressures may occur when swim­ming or when exposed to a water jet
(e.g. when showering or washing your
hands). During such activities, affected
areas may be subjected to a significantly
greater pressure than expected for the
immersion depth. Only watches with a
classification of 5 bar or more can be con­sidered water-proof (showering allowed).

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Start-up

GB

18

Watches with a classification of 10 bar
can also be used when swimming.

− If a watch is subjected to substantial
changes in temperature such as when
sun-bathing followed by a dip in cool
water, liquid may condense in the hous­ing. This is not necessarily a sign that it is
not water proof; it is, however, imperative
that the moisture is removed. Contact our
customer service team in such cases.

Start-up

Charging the battery pack of the GPS watch

The GPS watch has an integrated lithium polymer
battery pack. Fully charge the GPS watch before first use
(approx. 3 hours).

1. If necessary and to avoid corrosion, dry the contact
points

25

of the GPS watch thoroughly before

starting the charge process.

2.

Secure the clip on the USB cable

2

on the GPS

watch

1

(see fig. D).

NOTICE!

Risk of damage!

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Start-up

GBIRE

19

Incorrectly connecting the cable may cause
the watch or cable to heat up.

− Make sure that the USB cable is connected
so that the metal pins on the clip lock
directly into the contact points of the
watch.

3. Connect the USB cable with a USB charger or a USB
port on your computer carrying power. There is no
need to install a driver for charging the battery pack.

If the GPS watch has been switched off, it automatically
switches on when charging.

The icon of a charging battery appears on the display
panel

13

during the charging process.

If the battery pack is fully charged, the “FULL” indicator
will appear.

4. Pull the USB plug out of the USB charger or PC.

5. Carefully take the clip for the USB cable off of the GPS
watch.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Start-up

GB

20

Battery pack charging level

One battery pack charge is sufficient for max. 16 hours of
operation in workout mode with GPS and approx. one
year in watch mode.

The battery pack charging level is indicated with four
bars in the icon

20

on the display panel

13

.

−

If only one bar is visible, you should charge the
watch as soon as possible.

Chest strap

The elastic chest strap with the transmitter unit is for meas­uring the heart rate. The transmitter unit records heart
beats via the gummed area of the chest strap and transmits
the pulses to the GPS watch via Bluetooth®. Therefore, you
must establish a Bluetooth® connection between the GPS
watch and the transmitter unit (“Pairing”) after putting on
the chest strap. By factory default, the watch is paired with
the chest strap. Normally, re-pairing is only required after
changing the batteries of the chest strap of after changing
the

chest strap.

The battery is already inserted in the chest strap upon
delivery; it is operational. The section “Changing the
battery of the transmitter unit” explains how to change
the transmitter unit’s battery.

The transmitter unit becomes active when you put the
chest strap on and switches off when you take the chest
strap or transmitter unit off.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Start-up

GBIRE

21

To put the chest strap on:

1. To ensure proper contact with the skin, wet the
gummed surface of the chest strap

7

with a small
amount of warm water or apply a small amount of
ECG gel (available in special medical stores)
(see fig. F).

2. Use the snap fasteners to connect the transmitter
unit

8

with the chest strap (see fig. G).

3. Adjust the chest strap so that it is fitted firmly on the
chest under the pectoral muscles and the

transmitter

unit is the right way around (see fig. H).

4. Switch the GPS watch to workout mode and have it
display your heart rate (see section “Workout mode
with GPS”). The heart beat icon

17

or

22

or in the

top row

15

will start flashing and your heart rate
will be displayed after a short time.
If this is not the case, refer to the chapter
“Troubleshooting”.

).).

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Start-up

GB

22

Bike holder

The GPS watch can be worn like a wristwatch or be
mounted on the handlebar of your bike with the
enclosed holder:

1. Mount the bike holder

4

on the

handlebar of your bike.

2. Use the enclosed insertion
plat

e

6

if the bike holder

is too loose.

3. You can use cable straps

5

to permanently mount

the bike holder:

4. Mount the GPS watch
on the bike holder.

4

5

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Start-up

GBIRE

23

Downloading and installing the Crane
Connect app

You can use the GPS watch with your smartphone
(Android or iOS). For this, you will need the free Crane
Connect App:

The app works with iPhone 4s and higher, iPads from
the 3rd generation and higher, Bluetooth® Smart Ready
smartphones and tablets with Android 4.3 as well as
more recent versions. Bluetooth® 4.0 must be supported.
You can find a compatibility list on
www.cranesportsconnect.com/kompatibilitaet.

− Download the free Crane Connect app from the App
Store, from the Google Play Store or via the following
QR code:

QR code for Android: QR code for iOS:

− Install the Crane Connect app on your smartphone.

NOTICE!

Follow the instructions on your smartphone
for this.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Start-up

GB

24

General information about GPS

The global positioning system (GPS) uses a network of
US satellites to measure distance, speed and altitude.
The United States of America operates this network of
satellites and is also responsible for its accuracy and
maintenance.

Proper reception of satellite signals is only possible in
clear weather (clear skies) and suitable reception area – an
open area with an unobstructed view of the sky.

Poor weather (e.g. heavy snowfall) and a disrupted re­ception area (GPS watch is covered by clothing or other
objects, high rises, narrow valleys and gullies inhibit
reception) can significantly affect the performance and
accuracy of the GPS watch.

GPS reception is significantly restricted in buildings:
Under certain circumstances, it may be possible to
determine one’s position in the vicinity of windows with
an unobstructed view of the sky; however, it is not
possible to receive GPS signals in other indoor areas and
in basements.

If the GPS watch is not able to receive a signal, it will
switch GPS off after 30 minutes to save battery power.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Start-up

GBIRE

25

Accuracy of GPS

The GPS watch is accurate to 3 metres CEP (50%)
outdoors. The specification of accuracy refers to
so-called 50% CEP (circular error probability).
This means that with excellent satellite reception, 50%
of all measurements are located within a circle with
the specified radius of 3 m. However, this also means
that half of the measurement points are outside of this
radius.

But 95% of all measurement points are located within
a circle with twice the specified radius. With excellent
satellite reception, nearly all points are located within a
circle with a radius of 6 m.

95% of all

measuring points

50% of all

measuring points

3 m

6 m

measuring points

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Start-up

GB

26

Finding satellites

In ideal conditions during a cold start, finding satellites
may take up to a few minutes or only a few seconds with
a warm start.

A cold start is at hand when you use the GPS watch for
the first time, haven’t used it for a prolonged period or
have covered a considerable distance since the last time
your position was determined (e.g. 300 km).
In this case, the GPS watch must retrieve the satellite
constellations again.

A warm start is possible when the GPS watch has not
covered a large distance since the last time the position
was determined and providing a considerable amount
of time has not passed. The more satellites have moved
out of the periphery of the GPS watch since the last
positioning, the longer it will take to find satellites.

For fast GPS reception, it is important that the watch
must be in an idle position and motionless.

Tip: Before you start your workout, set your
GPS watch down in open terrain with an
unobstructed view of the sky (e.g. on a window
ledge or car roof) and activate workout or
interval mode (see sections “Workout mode”
and “Interval mode”) so that the GPS watch
starts looking for satellites.

The GPS icon

16

flashes while searching. As soon as
enough satellites are received, the icon will be illuminated
continuously.

TipTip

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

27

Operation

Turning the GPS watch on and off

The watch is shipped in a deactivated state. The GPS
watch will turn on when the battery pack is being
charged.

Activation

Press and hold the LAP/RESET key

11

for approx.
5 seconds to activate the GPS watch. The time will
appear on the display panel

13

.

Deactivation

To conserve battery power, you can switch the GPS
watch off when not in use:

1. Switch to time mode (see section “Time mode”).

2. Press and hold the LAP/RESET

key

11

for approx.

5 seconds.

As soon as the display panel

13

goes out, the GPS

watch has switched off.

Locking keys

You can lock the key functions to protect
against unwanted use:

− Tap the VIEW

10

and MODE keys

12

simultaneously.
A key icon and the message “ON” will
appear briefly on the display panel.
The keys are now locked.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

28

− To unlock them, tap the VIEW and
MODE keys again simultaneously.
A key icon and the message “OFF” will
briefly appear on the display panel.
The keys have now been unlocked.

Illumination of the display panel

− Tap the LIGHT

14

key to illuminate the display

panel for approx. 3 seconds.

Night mode

It is also possible to continuously illuminate the display
panel:

− Press and hold the LIGHT

key

14

for approx.
3 seconds.
This will activate night mode so that the display
panel is continuously illuminated.
If the GPS watch is not receiving a GPS signal, night
mode will automatically deactivate after approx.
5 minutes.

NOTICE!

The light consumes a considerable amount
of energy, which depletes the battery pack
more quickly.

− Tap the LIGHT key to deactivate night mode. The
display light will go out after approx. 3 seconds.

14

for approx. for approx.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

29

GPS watch modes

The GPS watch has the following main modes, which will
be described in greater detail in the following sections.

• System setting mode
Configure basic settings.

• Time mode
Displays the current and 2nd time.

• Workout mode with GPS
Perform sport with automatic measurement of
distance and heart frequency.

• Interval mode with GPS
Perform different sports one after another.

• History mode
Access the workout summary.

• Alarm mode
View and configure alarm time.

By tapping the MODE key

12

, you access the modes
one after another except for the setting mode which is
described below.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

30

System setting mode

In setting mode, you define the basic settings for the
GPS watch such as language, time and display panel
contrast.

To access the setting mode:

1. Access the time mode:
To do so

, tap the MODE key

12

several times until the word “CLOCK”
appears on the top row

15

and the

time appears a short time later.

2. Press and hold the
MODE key

12

for approx.
two seconds.
The first item in setting mode
(“PAIR”) will appear.

The following keys are active in setting mode:

− ST./STP

9

– Increase the value, change selection

(e.g. yes/no or units, etc.), start functions.

− LAP/RESET

11

– Reduce value, change selection.

− VIEW

10

– Skip to the next menu item.

− MODE

12

– Leave menu, back to time mode.

Any changes made to values take effect immediately.
You can make the following settings:

11

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

31

PAIR ? Strap

This function establishes a Bluetooth® connection
between the chest strap transmitter unit and the GPS
watch.

1. Put on the chest strap
(see section “Chest strap”).

2. Access the menu item
“PAIR ? Strap”.

3. Tap the ST./STP key

9

.
The message “PAIRING” will appear;
the connection will be established.

−

After a short time, the message “DONE!” will appear
and the Bluetooth® connection will be established.

−

If the message “FAIL!” appears, check to make sure
that the chest strap is properly fitted and start from
the beginning.

PAIR ? APP

This function establishes a Bluetooth® connection
between the GPS watch and the Crane Connect app on
your smartphone (see section “Downloading and
installing the Crane Connect app”).

1. Activate Bluetooth® on your smartphone.

2. Start the Crane Connect app on your smartphone.

3. In the app, select the icon for the GPS watch in the “
All settings” menu.
The “Settings” menu will appear.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

32

4. Tap the option “Connect”
in the “Pairing” field.

5. On the GPS watch,
access the menu item “PAIR ? APP”.

6. Tap the ST./STP key

9

.
The message “PAIRING” will appear;
the connection will be established.

−

After a short time, the message “DONE!” will appear
and the Bluetooth® connection will be established.

−

If the message “FAIL!” appears, make sure that
Bluetooth® is activated on your smartphone and
start from the beginning.

GPS SYNC

This function switches automatic syncing
of the time via the GPS signal ON or OFF.
The GPS system is activated in workout
and interval mode. A very accurate time
signal automatically adapted to your
current time zone is transmitted at the
same time.

Summer time (DST)

As soon as you have activated the
“GPS Sync” function, summer time is
switched ON or OFF as a result.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

33

Setting the time (SECOND)

If you have deactivated the “GPS Sync” function,
manually set the time by following the steps below

:

The time will appear on the display
panel and the word “SECOND” will appear
on the top row

15

. The seconds indicator

will flash.

1. To reset the seconds to zero,
tap the ST./STP key

9

.
Then wait e.g. for the time signal
from a radio station.

2. Tap the VIEW key

10

.
The word “MINUTE” will appear on the top row
and the minute indicator will flash.

3. Use the ST./STP

9

and

LAP/RESET

11

keys to set the minutes.

4. Repeat steps 2 and 3 to set the hours,
year, month and day.

Time format (FORMAT)

You can switch the time displayed
between 12 hours (“AM/PM”) or 24 hours.

− Tap the ST./STP key

9

to switch the

time format.

and and

keys to set the minutes. keys to set the minutes.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

34

2nd Time (T2)

This function sets the number
of hours the 2nd time should differ
from the current time.

UNITS

This function determines the units
of measure in which values will be
displayed:

• MET – metric in metres
(m, km, km/h) and grams (kg).

• IMP – imperial with foot (ft),
miles (m, m/h) and British pound (lb).

• NAU – nautical with sea miles (nm),
knots (kt) and British pounds (lb).

Automatic lap (AUTO LAP)

In workout mode, the laps covered
can be counted and recorded in lap
times. Mark the beginning of each lap
by tapping the LAP/RESET key

11

.

With the “AUTO LAP” function, laps can
automatically be generated according to
the distance covered.

1. Set the desired distance after which a new
lap will be marked (e.g. 1 km).
Possible values: 0.1 to 5.0 km/m/nm.

2. Tap the VIEW key

10

.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

35

3. Set to “ON” to activate the “AUTO LAP” function.

When “AUTO LAP” is activated, you can still manually
record additional lap times at any time with the
LAP/RESET key

11

.

Automatic indicator charge (SCROLL)

In workout mode, you can switch the
values displayed with the VIEW key

10

.
The function “SCROLL” will automatically
change the indicator every 5 seconds.
Here you can switch the automatic
indicator change function ON or OFF.

HR ZONE

You can set the upper and lower heart
rate limit at which the GPS watch emits
a warning tone when exceeded or fallen
below.

1. Set the upper limit in the centre row.

2. Tap the VIEW key

10

.

3. Set the lower limit in the bottom row.

4. Tap the VIEW key

10

.

5. Switch the warning tone ON or OFF
in the bottom row.

Gender (GENDER)

Set your gender here: “M” for male, “F” for female.
This value and the weight are needed to calculate the

calories burned.

VIEW key VIEW key

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

36

WEIGHT

Set your weight here.

KEY TONE

You can activate key sounds and acoustic signals when
changing activities in interval mode (“ON”) or you can
deactivate them (“OFF”).

CONTRAST

You can set the LCD contrast from

1 (bright) to 16 (dark) to optimise the
readability of the display panel for you.

Language (ENGLISH)

Here you can configure the language to
be displayed on the display panel. Possible selections:
“DEUTSCH” and “ENGLISH”.

RESET

During a reset, all values are reset
to the basic settings and all data
(workout protocols etc.) are deleted.

− Select “YES” to perform a reset.

− Select “NO” if you do not want
to perform the reset.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

37

Time mode

In time mode, you see the current time
and date. The GPS function is deactivated
in order to save power; a battery pack
charge lasts for approx. one year.

To access the time mode:

− If necessary, tap the MODE key

12

several times

until the word “CLOCK” appears in the top row

15

and the time appears a short time later.

− Press the VIEW key

10

to switch between the

current time and the 2nd time.

Workout mode with GPS

In workout mode, you can perform a sport and the GPS
watch will automatically measure the distance and heart
rate. From this data and the values you provided for
gender and weight, the GPS watch will also determine
the calories burned.

After your workout, the GPS watch will save all relevant
data and you can view this data on your GPS watch
or transfer it to the Crane Connect app on your smart­phone/tablet for further analysis. If the Internet connection
on your smartphone is active, the Crane Connect app
will automatically upload all workout data to the website
www.cranesportsconnect.com for permanent storage
after your workout.

The preprogrammed sports “Running”, “Cycling” and
“Hiking” as well as profiles 1 and 2 differ with respect to
the values displayed: Whilst cycling, speed is of interest
and while hiking, altitude.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

38

To access the workout mode:

− If applicable, tap the MODE k

ey

12

several times, until the name of one
of the preprogrammed sports
mentioned above appears on the
top row

15

.
The GPS watch will look for the GPS signal
and the GPS icon

16

will flash. Once a GPS
signal is received, the icon will be illuminated
continuously.
After a moment, the preset indicators
for this sport will appear. A total of 6
values can be displayed on 2 pages.

− With the VIEW key

10

, you can switch
the indicator between the 1st and 2nd
page.

Selecting a sport

Before you start the workout,
you can select another sport:

− Press and hold the LAP/RESET key

11

to select a
preprogrammed sport.
The 5 predefined sports will appear one after
another in the top row

15

: RUNNING, CYCLING,

HIKING, USER 1, USER 2.

− Once the desired sport is displayed,
release the LAP/RESET key.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

39

The following table will show you the preprogrammed
indicators:

Sport Indicator 1st page Indicator 2nd page

RUNNING duration,

distance,
pace

lap time,
heart rate,
calories

CYCLING speed,

distance,
duration

average speed,
heart rate,
calories

HIKING height,

distance,
duration

time,
heart rate,
calories

USER 1 distance,

pace,
duration

lap time,
heart rate,
lap number

USER 2 heart rate,

duration,
height

geographic lati­tude,
distance,
geographic
longitude

Configuring an indicator

You can modify the values to be shown:

− Top r

ow

15

: press and hold the LIGHT key

14

.

− Centre row

18

: press and hold the VIEW key

10

.

− Bottom row

19

: regular the MODE key

12

.

time,time,

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

40

The following values can be shown in the centre line:

• Distance (0-99.99)

• Duration (format up to 60 minutes = mm:ss.th,
1 hour and over = hh:mm:ss)

• Current heart rate

• Current pace (“CP”)

• Current speed (“km/h”/“MPH”/“kn”)

The following values can be displayed in the top and
bottom row:

• Altitude (0-9999m)

• Calories (0-9000)

• Distance (0-99.99)

• Duration (format up to 60 minutes = mm:ss.th,
1 hour and over = hh:mm:ss)

• Current heart rate

• Lap No. (0-99)

• Lap time (format up to 60 minutes = mm:ss.th,
1 hour and over = hh:mm:ss)

• Average pace (“AP”)

• Current pace (“CP”)

• Average speed (“AS”)

• Current speed (“km/h”/“MPH”/“kn”)

• Time

• Geographic latitude (degree of latitude, LAT)

• Geographic longitude (degree of longitude, LON)

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

41

Starting⁄stopping the workout

− Before starting your workout, wait until the GPS
watch is receiving a proper GPS signal and the GPS
icon

16

is no longer flashing (also see section

“Finding satellites”).

− Press the ST./STP key

9

to start or stop
the workout.
The workout icon

24

will illuminate.

It will go out when you stop your workout.

Taking lap times

− During your workout, press the LAP/RESET key

11

to
take a lap time.
The laps can also be timed automatically
(see section “AUTO LAP”).
A maximum of 99 lap times are saved
for each workout.

After your workout

Once you have completed your workout, transfer the
training data to the memory of the GPS watch:

− Press and hold the LAP/RESET key

11

until the

message “SAVED!” appears in the top row

15

.

As a result, you have reset all data for the workout to
zero and can start a new workout. The data for the
workout you completed will be stored in the memory of
the GPS watch. You can view them in the protocol later
(see section “History mode”) or transfer them to the
Crane Connect app on your smartphone/tablet
(see section “Data transfer”).

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

42

− Complete your workout (the workout symbol

24

will go out) and finish by accessing time mode. Thus,
you terminate GPS reception to save battery power
of the GPS watch.

Interval mode with GPS

In interval mode, you can perform up to four sports con­secutively and with multiple repetitions.

Example: You configure three repetitions, the first activity
involves 5:00 minutes of running, the second activity in­volves 3:00 minutes of walking. You start your workout,
the GPS watch displays “RUN” and counts down from 5
minutes. A time signal will sound when ten seconds are
left; then the 2nd activity will begin. The GPS watch dis­plays “WALK”and counts down from 3 minutes; a time sig­nal will be emitted when 10 seconds are left. Then the first
activity will restart. The process will be repeated a second
time, then the workout is complete and “FINISHED!” will
appear on the GPS watch.

As in workout mode, the GPS watch automatically meas­ures the distance and heart rate and calculates the calo­ries burned. After your workout, the GPS watch will save
all relevant data and you can view this data on your GPS
watch or transfer it to the Crane Connect app on your
smartphone/tablet for further analysis. If the Internet
connection on your smartphone is active, the Crane
Connect app will automatically upload all workout data
to the website www.cranesportsconnect.com for perma­nent storage after your workout.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

43

To access the interval mode:

− Tap the MODE key

12

several times
if necessary until the world “INTERVAL”
appears in the top row

15

.

After a moment, the first activity
(in this case “Run”) with the config­ured time (in this case 3 minutes –
“03:00”) will appear and the number
of repetitions (“03 REP”).

Defining intervals

Before you start your workout,
you can define how it is structured:

1. In interval mode, press and hold
the MODE key

12

until the number of

repetitions flashes in the bottom row.

2. Configure how often certain activities
will be repeated.

3. Tap the VIEW key

10

.

The first activity will be shown.

4. Select “OFF” to deactivate this activity
and continue with step 11.
Or select “ON” to edit the sport.

5. Tap the VIEW key

10

.

The sport will start to flash.

6. Now select one of the following sports:

12

until the number of until the number of

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

44

RUN, JOG, WALK, REST, FAST, MED, SLOW.

7. Tap the VIEW key

10

.

The workout duration will start to flash.

8. Set the minutes for the desired workout length.

9. Tap the VIEW key

10

.

10. Set the seconds for the workout length.

11. Tap the VIEW key

10

.

12. Repeat steps 4 to 11 for the other three sports.

You have now defined your interval workout.

Starting⁄stopping the interval workout

− Before starting your workout, wait until the GPS
watch is receiving a proper GPS signal and the
GPS icon

16

is no longer flashing

(also see section “Finding satellites”).

− Press the ST./STP key

9

to start or stop the interval
workout.
The workout icon

24

will illuminate. It will go out

when you stop your workout.

− To switch to the next sport before the set time has
elapsed, tap the LAP/RESET key

11

.

After your workout

Once you have completed the workout, the GPS watch
will automatically save the workout data.

If you stop the workout early with the ST./STP key

9

,
you can manually save the workout data to the memory
of the GPS watch:

to start or stop the interval to start or stop the interval

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

45

− Press and hold the LAP/RESET key

11

until the

workout data are reset to the initial values.

As a result, you have reset all data for the workout to
zero and can start a new workout. The data for the
workout you completed will be stored in the memory of
the GPS watch. You can view them in the protocol later
(see section “Reading protocols”) or transfer them to the
Crane Connect app on your smartphone/tablet
(see section “Data transfer”).

− Complete your workout (the workout symbol

24

will go out) and finish by accessing time mode. Thus,
you terminate GPS reception to save battery power
of the GPS watch.

History mode

In protocol mode, you can view
the data saved during the workouts.

To access the protocol mode:

− Tap the MODE key

12

several times
if necessary until the word
“PROTOCOL” appears in the top
row

15

.

The last data record saved will
appear after a moment:

• You will see the number of the data
record (“02”) and the date (“APR30”)
in the top row

15

.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

46

• You will see the time when the workout is completed
in the centre row.

• In the bottom row, you will see the number of laps
(“L02”) to the extent they were counted and the
week day (“TUE”).

− By pressing the ST./STP

9

or LAP/RESET key

11

,
you browse forward or backward through the stored
data records.

− By pressing the VIEW key

10

, you can access further
details for the selected workouts on four or five
pages. In the process, the top row will always show
the number of the data record and the date.

• 2nd page
Centre: Distance, bottom: Time

• 3rd page
Centre: average speed, bottom: calories.

• 4th page
Centre: average pace, bottom: calories.

• 5th page
Centre: maximum heart rate, bottom: average heart rate.

• 6th page (only when laps were recorded)
Top: lap number and lap distance.
Centre: lap time
Bottom: interim time

− In the lap view, you browse forward or backward
through the stored lap data with the ST./STP

9

or

LAP/RESET key

11

.

− Press the VIEW key

10

to go back to the workout

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

47

summary.

Deleting workout data

You can delete the data for the last workout or all data
out of the memory of the GPS watch:

1. Access the protocol mode (see previous section).

2. Press and hold the MODE key

12

until the word
“DELETE” appears in the top row.
“Last” will appear in the centre row.

3. If you do not want to delete the last workout you
saved, proceed with step 6.

4. If you would like to delete the last workout saved,
select “YES” with the ST./STP key

9

in the bottom row.

5. Tap the VIEW key

10

.
The last workout is deleted and the message “DONE !”
will appear briefly. Then the GPS watch will switch
back to protocol mode.

6. Tap the VIEW key

10

.
Now “ALL” is displayed in the centre row.

7. If you would like to delete all the workout data
saved, use the ST./STP key

9

to select “YES” in the

bottom row.

8. Tap the VIEW key

10

.
If you selected “Yes” in the previous step, all data
records have been deleted and the message “DONE
!” will appear briefly. Then the GPS watch will switch
back to protocol mode.

VIEW key VIEW key

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Operation

GB

48

Alarm mode

In alarm mode, you can view and set the alarm time.
To access the alarm mode:

− If necessary, tap the MODE key

12

several times until the word “ALARM”
appears in the top row

15

.
The set alarm time will appear after
a moment.

− You can switch the alarm ON or OFF
in the bottom row with the
ST./STP key

9

.

Setting the alarm time

1. Press and hold the
MODE key

12

in alarm mode until the number of

hours flashes in the centre row.

2. Set the hour for the intended alarm time with the
ST./STP

9

and LAP/RESET key

11

.

3. Tap the VIEW key

10

.

The number of minutes will flash in the centre row.

4. Use the ST./STP

9

and LAP/RESET key

11

to set the

minutes for the intended alarm time.

5. Tap the VIEW key

10

.

The alarm has now been set and switched ON.

An alarm signal will sound for 30 seconds at the set
alarm time which you can switch off by pressing any key.

The settings will remain intact and the alarm will “ring”
again the next day.

and LAP/RESET key and LAP/RESET key

VIEW key VIEW key

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Operation

GBIRE

49

Data transfer

In order to transfer the workout data saved on the GPS
watch to the Crane Connect app on your smartphone/
tablet, the following prerequisites must be in place:

− End any workouts in progress (the workout symbol

24

must be off).

− Save the last workout data on the GPS watch

(see both sections “After your workout”).

− Access the time mode (see section “Time mode”).

− Activate Bluetooth® on your smartphone or tablet.

− Install the Crane Connect app on your smartphone/

tablet.

− In the app’s home menu, open the analysis via the

symbol for the GPS watch. The app will connect to the
GPS watch itself and the data transfer will start.

− In the app, you can select whether the data will be

automatically deleted from the GPS watch after the
transfer or whether it will be retained there.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Cleaning and maintenance

GB

50

Cleaning and maintenance

NOTICE!

Risk of damage!

Water that has penetrated the housing
can cause damage to the GPS watch or the
transmitter unit.

− Never immerse the GPS watch or the
transmitter unit in water.

− Make sure that no water penetrates the
housing.

NOTICE!

Risk due to improper operation!

Improper handling of the GPS watch may
result in damage.

− Do not use any aggressive cleaners,
brushes with metal or nylon bristles or
similar. They could damage the surfaces.

− Make sure that no drops of water are left
on the display of the GPS watch. Water
may cause permanent discolouration.

1. Only clean the GPS watch and the chest strap with a
soft, damp and lint-free cloth.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Cleaning and maintenance

GBIRE

51

2. Check the charging contacts

25

on the back of the
watch. If they are contaminated with perspiration
residue, flakes of skin or dust, use the cleaning brush

3

contained in the product contents.

3. Add a few drops of clean water to the contact pins of
the watch and then clean them with the cleaning
brush.

325

Changing the transmitter unit’s battery

NOTICE!

Risk of damage!

If you do not close the battery compartment
cover properly, moisture may penetrate the
transmitter unit. This could lead to damage
to the transmitter unit.

− Firmly close the battery compartment
cover to prevent moisture from pene­trating the transmitter unit.

25

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Cleaning and maintenance

GB

52

1. To open the battery compartment
cover

26

, use a coin to turn it

counterclockwise.

2. Take the old battery
out and insert a new
one of the same type
so that it is in the
same position.
Do not remove the
white sticker from
the battery compartment.
The battery must be located under the small golden
metal hook, the positive pole must be pointing up.

3. Put the battery compartment cover
back into place. Observe the marks
on the cover and on the housing.

4. To close the battery compartment
cover, use a coin to turn it clockwise.

26

CR2032

CR2032

CR2032

CR2032

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Storage

GBIRE

53

Storage

− Clean the GPS watch and the chest strap thoroughly
before storage (see section “Cleaning”).

− Charge the battery pack fully.

− Switch the GPS watch off.

− Remove the battery from the transmitter unit.

− Always store the GPS watch and the chest strap in a
dry place.

− Protect the GPS watch and the chest strap against
exposure to direct sunlight and other sources of heat.

− Store the GPS watch and chest strap so that they are
not accessible for children at a storage temperature
between -20°C and +70°C.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Troubleshooting

GB

54

Troubleshooting

Problem

Possible cause

Solutions, tips

The battery
pack in the
GPS watch is
not charging.

The charging ca­ble is not proper­ly connected.

The metal pins
must lock directly
into the contact
points of the
watch.

Charging con­tacts are dirty.

Clean the charg­ing contacts on
the back of the
watch (see sec­tion “Cleaning”).

USB port is
de-energised.

Make sure that
the USB port to
which the GPS
watch is connect­ed has power.

Keys don't
respond.

Keys are locked. To unlock them

tap the VIEW

10

and MODE key

12

at the same

time.

the back of the

the back of the

watch (see sec

watch (see sec

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Troubleshooting

GBIRE

55

Problem

Possible cause

Solutions, tips

Display blank. The GPS watch

is off.

To turn it on,
press the LAP/
RESET key

11

for approx. 5
seconds.

The battery pack
is empty.

Charge the bat­tery pack.

Contrast too low. Increase the con-

trast (see “System
setting mode”,
“Contrast”).

Display dark. GPS watch is

overheated (ex­posure to sun­light, excessively
high ambient
temperature).

Let the GPS watch
cool off.

Display very
slow.

Normal at tem­peratures below
0°C.

When the tem­perature rises
above 0°C again,
the display will
return to normal.

temperature).temperature).

trast (see “System trast (see “System

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Troubleshooting

GB

56

Problem

Possible cause

Solutions, tips

Speed is not
shown.

GPS reception
insufficient.

Observe the
notes on “Gen­eral information
about GPS”.

Speed is
shown al­though not
walking/
cycling.

Heart rate is
not shown.

Connection
between the
GPS watch and
the chest strap
interrupted.

Establish the
Bluetooth®
connection be­tween the GPS
watch and the
chest strap (see
section “Pair ?
Strap”).

Transmitter unit
battery emp­ty or inserted
incorrectly.

Check the battery
(see “Changing
the transmitter
unit's battery”).

No conductive
connection with
the skin because
the chest strap is
too dry.

Moisten the
gummed part of
the strap with a
small amount of
water.

tween the GPS

tween the GPS

watch and the watch and the

Transmitter unit Transmitter unit

ty or inserted ty or inserted

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Troubleshooting

GBIRE

57

Problem

Possible cause

Solutions, tips

Workout can­not be started.

The memory of
the GPS watch
is full; the work­out time or lap
time exceeds 99
hours.

Transfer data
to the Crane
Connect app
and clear mem­ory (see section
“RESET”).

“Memory full!”
message.

Memory full

Please make sure that the GPS watch does not automati­cally clear the memory containing your data.

To do so, you must activate automatic clearing of the
memory after a data transfer under Settings before the
data is transferred from the GPS watch to the app.

If the memory of the watch is full, no more data can be
recorded and the time measurement for the workout
can no longer be started in workout or interval mode.

This means that the ST./STP key can no longer be
pressed. However, before the memory is full, the mes-

sage “Memory full!” will appear on the display of the
GPS watch. Once the workout time or the lap time is full
(99h), no further recording is possible either!

If you have further questions, you can also reach us at
the following address:

KRIPPL-WATCHES
Maria-Theresia-Straße 41

4600 Wels
Austria

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Technical data

GB

58

E-mail address: [e-mail]
Please visit our online product service page for helpful

FAQs for your GPS watch.
http://www.cranesportsconnect.com

EAN Code: 20023898

Technical data

Model: HO5-GPS-6A/6B/6C
Power supply

– GPS watch

– Transmitter unit

lithium polymer battery
pack, 380 mAH, 3.7 V
lithium battery 3 V,
CR2032

Transmission frequency from
the transmitter unit to the GPS
watch: Bluetooth® 4.0

GPS accuracy: 3 metres CEP (50%) in

the open
Operating temperature:
Storage temperature:

-10°C to +60°C

-20°C to +70°C

Article number: 92412

All data stated are merely nominal values. Technical
changes reserved.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

Disposal

GBIRE

59

Declaration of conformity

Krippl-Watches hereby declares that the
GPS watch (model no. HO5-GPS-6A/6B/6C)
complies with the fundamental requirements

and other applicable provisions of the R&TTE
1999/5/CE, 2004/108/EC (electromagnetic compatibility)
and RoHS 2011/65/EU directives.

You can access the complete text for the declaration of
conformity on our website:

www.cranesportsconnect.com (EAN code: 20023898).

Disposal

Disposing of the packaging

Dispose of the packaging separated into
single type materials. Dispose of card­board and carton as waste paper and
foils via the recyclable material collection
service.

AFTER SALES SUPPORT

[e-mail]

GB

IRE

00800/52323000

IRE

Disposal

GB

60

Disposing of old devices

(Applicable in the European Union and other European
states with systems for the separate collection of
reusable waste materials)

Old devices must not be disposed of with
household waste!

If the GPS watch can no longer be used, every
user is required by law to dispose of old

devices separately from their household

waste, e.g. at a collection point in his community/bor-

ough. This ensures that old devices are recycled in a
professional manner and also rules out negative conse­quences for the environment. For this reason, electrical
equipment is marked with the symbol shown here.

Batteries and rechargeable batteries may not be
disposed of with household waste!

As the end user you are required by law to

bring all batteries and rechargeable batteries,
regardless whether they contain harmful
substances* or not, to a collection point run by

the communal authority or borough or to a
retailer, so that they can be disposed of in an environ­mentally friendly manner.

Bring the entire GPS watch (including the battery pack)
to your collection point and make sure that it is in an
uncharged state!

* labelled with: Cd = cadmium, Hg = mercury, Pb = lead

GBIRE

Description of malfunction:

Return your com­pleted warranty card
together with the

faulty product to:

Krippl-Watches

Freepostcode:
RLTU-ZYZE-SKLG

Picadilly 180

W1J 9HF London

UNITED KINGDOM

Your details:

Name

Address

E-mail

Date of purchase *

* We recommend you keep the receipt with this warranty card.

Location of purchase

Phone lines available Monday to
Friday, 8am - 6pm. Calls cost 10p
per minute from a landline, calls
from mobiles may vary.

YEARS

WARRANTY

Warranty Card

BLUETOOTH® GPS WATCH WITH HEART RATE MEASUREMENT

AFTER SALES SUPPORT

[e-mail]

00800/52323000

Model: AE5-GPS-6A/6B/6Cv
Product Code: 92412

06/2015

IRE

GB

IRE

GB

Warranty conditions

Dear Customer,

The ALDI warranty offers you extensive benefits compared
to the statutory obligation arising from a warranty:

Warranty period: 3 years from date of purchase.

6 months for wear parts and con-

sumables under normal and proper
conditions of use (e.g. rechargeable
batteries).

Costs: Free repair/exchange or refund.

No transport costs.

Hotline: Free hotline.

ADVICE: Please contact our service hotline by

phone, e-mail or fax before sending
in the device. This allows us to provide
support in the event of possible oper­ator errors.

In order to make a claim under the warranty, please
send us:

• together with the faulty item the original receipt
and the warranty card properly completed.

• the faulty product with all components included
in the packaging.

support in the event of possible oper

GBIRE

The warranty does not cover damage caused by:

• Accident or unanticipated events (e.g. light-

ning, water, fire).

• Improper use or transport.

• Disregard of the safety and maintenance in-
structions.

• Other improper treatment or modification.

After the expiry of the warranty period, you still have the
possibility to have your product repaired at your own ex­pense. If the repair or the estimate of costs is not free of
charge you will be informed accordingly in advance.

This warranty does not limit the statutory obligation of the
seller arising from a warranty. In the event that a product
is received for repair, neither the service company nor the
seller will assume any liability for data or settings possibly
stored on the product by the customer.

Spend a little Live a lot.

Great care has gone into the manufacture of this product and it should there­fore provide you with years of good service when used properly. In the event
of product failure within its intended use over the course of the first 3 years af­ter date of purchase, we will remedy the problem as quickly as possible once it
has been brought to our attention. In the unlikely event of such an occurrence,
or if you require any information about the product, please contact us via our
helpline support services, details of which are to be found both in this manual
and on the product itself.

PRODUCED IN CHINA FOR:

ALDI STORES LTD. PO BOX 26, ATHERSTONE
WARWICKSHIRE, CV9 2SH

ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
visit us at www.aldi.com

AFTER SALES SUPPORT

www.aldi.co.uk00800/52323000

Model: AE5-GPS-6A/6B/6C Product code: 92412

06/2015

YEARS

WARRANTY

GB IRE

oblem

unlikely e

FOR: