IMPORTANT SAFETY INSTRUCTIONS
- 2 -
IMPORTANT SAFETY INSTRUCTIONS
- -
3
IMPORTANT SAFETY INSTRUCTIONS
- -
4
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety precautions and information for correct usage. Please be
sure to read this manual carefully before use to avoid any damages to the device.
Please do not place the product in hot, wet or dusty environment.
Please do not place the product in hot environment. Especially in summer, do not place it in a car
with all windows closed.
Avoid dropping or clashing the product and do not shake the TFT screen violently, or it may cause
a damage or abnormal display to the screen.
Please select a suitable volume and avoid loud sound while using earphones. Please turn down
the volume or stop using if you get a roaring in your ears.
For following situations, please charge the product.
A. The device shows on the top right corner.
B. System automatically shut down, and it turns off soon after restart.
C. Operation key shows no reaction.
Notes: Chargers of other models cannot be used for this device because it may cause damage to the
device which we are not responsible for. Please contact our customer service department if you need
a replacement charger.
Please do not disconnect the device while formatting, downloading and uploading; otherwise it may
cause application errors.
We are not responsible for any memory erase loss caused by damage or product maintenance, or
other personal reasons.
Please do not disassemble the product personally, and avoid cleaning the product with ethyl
alcohol, thinner, or
HHTT
benzene
TTH
.
Do not use this product in the areas which prohibit use of electronic devices, for example, in
airplane.
Please do not use this product while driving or walking in the street, or it might cause a car
accident.
NOTES: ~ This device does not support waterproof function.
~ All images on this manual are only for reference! Specification and appearance of the
products are subject to change without prior notice!
- -
5
FIRST USE:
Batter y Recharge
The device has 2 (Two) built-in DC 3.7V, 1400 mAh rechargeable Lithium-ion Polymer battery.
Recharge
as follows:
Insert the small plug from the supplied AC/DC Adaptor to the DC IN jack on the device. Plug the
AC/DC Adaptor to wall outlet having AC 100-240V~, 50/60 Hz.
This power unit is intended to be in a vertical or floor mount position.
Notes: Your battery will last longer if you follow these simple guidelines for caring for and storing it.
A. Using the supplied AC/DC Adaptor for charging only. Other models charger may damage the
device.
B. For charging first time, charge it approximate 10 hours. For normal charging, it needs
approximately 4 hours.
C. Recharge and store the device within the temperature range of 5°C~35°C (40°F~95°F).
D. Do not overcharge (longer than 24 hours). Excessive charging or running the unit until battery
goes empty will damage battery. Battery life will be extended if you keep the battery fully charge.
E. Battery life naturally shortens slowly over time.
F. The rechargeable battery incorporated in this product is not user replaceable.
Using the touch screen
Tap/press the corresponding button on the touch screen with your fingertip or the supplied
Touch the screen and slide from Right to Left; Left to Right to scroll the pages.
Notes:
A. Do not use force when touching the touch screen, as it may cause damage to the screen.
B. To avoid damage to the touch screen, do not use any object other than your fingers or the supplied
Touch Screen Pen to operate it.
C. Do not tap/press on the touch screen if your fingers are not clean.
D. Do not tap/press on the touch screen with gloves on.
E. The touch screen may not function if you use a fingernail or other instruments such as a ballpoint
pen.
Micro SD card
This device supports Micro SD Memory Card (Card not included) to increase memory size; insert a
Micro SD card into the card slot on the side of unit.
Notes:
A. Insert the card (Up to 32GB, not included) into the card slot in the direction shown in the rear of
unit.
B. To take out the card, press the card until a “Click” is heard then pull out the card.
C. Before replacing the storage card, make sure the unit has been powered off.
D. When inserting the storage card, make sure the direction you selected is correct. Never insert
violently to avoid damaging the card or the unit. If it doesn’t work, please check if the direction is
correct.
E. When the card is used for the first time, or it has been used in other device, please format it first
through the Computer. You also need to download the desired music, photos and movie into the
card before installing into the unit
Import ant: Formatting the Micro SD Card will delete all the data on the card. Dow nload the data
to your computer
before formatting the card.
- 6 -
Touch Screen Pen (on the rear of cabinet).
USB Host (Full size USB port)
This device supports USB device for extending the memory size, or USB Thumb Driver/3G Driver,
inserts it to the USB Host on the side of unit.
Notes:
A. Before replacing the USB driver, make sure the unit has been powered off.
B. For 3G USB drive or USB thumb drive connection, check (icon
will turn to green) the "USB
mode Select" in "Host Mode" in setting menu.
C. When inserting the USB driver, make sure the direction you selected is correct. Never insert
violently to avoid damaging the USB driver or the unit. If it doesn’t work, please check if the
direction is correct.
Power On/Off the Device
Reset
Notes:
Like your computer, after turning on the Device, you may have to wait a short while to let
the operating system boot up before the home page appears on the screen.
-7 -
A. Press and hold the button approximate 5 seconds to power on the unit. Touch and slide the
key bar shown on the screen upward to unlock.
B. In power on mode, press the button to turn off the screen for saving battery power. Turn on
the screen again as the the procedures above.
C. To power off, press and hold the button until the "Device options" window pop up then tap the
"Power off" button. The "Power off" window will pop up, tap the "OK" button to power off the unit.
If the device becomes abnormal, halt, freeze. Press the RESET Button in the reset hole by the
supplied Touch Screen Pen to reset the device as the figure below:
HDMI
DC IN MICR O
S
D USB TO P C USB HO S
T
PEN
MIC
RESE T
Connections:
Connect to PC
A. Press Menu button on the right top corner on the screen, set the "HOST MODE" in "USB Mode
select" to disable (uncheck) (icon
should be blank).
B. Connect the Device to the PC via the Mini USB port on the side of cabinet to the USB port on your
PC by the supplied connection cable.
Connect to HDMI TV
A. Connect the device to the TV (with HDMI port) via the Mini HDMI jack on the side of cabinet to the
HDMI port on the TV. (Connection cable not included).
B. Playback video, tap the screen once. The setting menu will appear.
C. Tap the Three Dots "..." button on the right bottom corner, the Selection menu will appear. Tap the
"HDMI" button.
D. Tap Output to HDMI: 720p" button to turn on the HDMI output, the screen on the device will turn off
and the correct picture will appear on your TV.
E. To turn off the HDMI output, unplug the connection cable from the Device and TV, the screen on
the Device will become normal.
Important: HDMI output operates in Video playback mode only.
Earphone jack:
For private listening, connect an Earphone/Headphone to the Earphone/Headphone jack on the side of
cabinet. The speaker will cut off automatically. (Earphone/Headphone not included).
- -
8
Loading...