Craig CMP615D User Manual

Battery Recharge

The player had a build-in DC 3.7V, 250mA Lithium battery. Recharging the battery as:
Power ON the player by slide the POWER switch to ON position.

Connect the player to the computer by the supplied USB connection cable.
The display on the unit will shows as below and will start to charging automatically:

NOTE:

1) For the first time to recharge the build-in battery, charge it at least 10 hours.
For normal recharge, it need approximate 4 hours.

2) When the POWER Switch is on the OFF position, the player can’t be charge.

TRANSFERRING FILES

Before you getting start to playback music, videos or photos, you should transfer those
files into the player as:

Download the normal music, videos and photos files into the player:

The player has two Online Device modes: MEDIA DEVICE and USB Disk, for normal

7

files transferring, set the player in USB DISK mode as:

1. Power on the player by slide the POWER Switch to ON position, the setting manual

(FIG. 1) will appear on the display automatically.

FIG.1 FIG.2

2. Press the >>I or I<< button to select SETUP then press MENU button to enter.

3. Press >>I or I<< button to select Online Device (FIG. 2) then press MENU Button to
enter.

4. Press >>I or I<< button to select USB Disk, press MENU Button to confirmed the

selection then press and hold the MENU button to save the setting and exit.

5. After above setting, connect the player to the computer by the supplied USB

connection cable.

6. Download the specific files into the player as download the files to others portable

device.

7. After downloaded, disconnect the unit from computer.

NOTES:
~ All the downloaded files in this setting will stored in the Root Directory in the player.
~ For video files, only AMV video files (with .amv extension) can be playback by the
player. For details, please refer to the AMV converter section.

Download the DRM-WMA（Digital Rights Management-WMA, songs with copy
right protective in WMA format）files into the player:

1. Set the Online Device modes to MEDIA DEVICE as above procedures.

2. Connect the player to the computer with the supplied USB connection cable. The

8

computer will detected the player and show:

3. Select and turn on the Windows Media Player in the computer and double click the

SYNC button on the menu ba r.

4. Drag the specific DRM songs into the sync list .

5. Double click the Start Sync button on the Windows Media Player to start synchronize

the DRM songs into the player.

6. When finished, disconnect the player from the computer. (The operation procedures

and the location of control buttons between Windows Media Player 10 and 11 are
difference. For details, please refer to the instruction manual of Windows Media
Player. )

7. In this setting, the DRM songs will stored in the Music Folder in the player.

IMPORTANT NOTE:

1. The DRM songs only can sync (synchronize) into the player through the Windows

9

SYNC button