Craig CHT921 Owner's Manual

Size: 148.5(W) x 210(H)mm (A5)
Stereo Sound Bar System with Bluetooth® Wireless Technology
Stereo Sound Bar System with Bluetooth
®
Wireless Technology
Model: CHT921
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
WARNING:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Warnings
FCC NOTICE:
To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user’s authority to operate this device.
2. Mounting the Speaker Bar onto a wall
We recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall.
Distance Between Two Brackets
1. Placing on the table
When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard.
16.4 inches
AC/DC adapter
To the DC IN jack on the rear of unit.
to the wall outlet having AC 100-240V~, 50/60 Hz.
Insert the small plug from supplied AC/DC adaptor to DC IN jack on the rear of the unit and insert the AC/DC adaptor
A
U
X 2
NOTE:This AC/DC Adapter is intended to be
correctly orientated in a vertical or floor mount position.
3
Loading...
+ 9 hidden pages