Size: 148.5(W) x 210(H)mm (A5)
CONVERTIBLE
SPEAKER SYSTEM
CONVERTIBLE
SPEAKER SYSTEM
Model: CHT914c
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Owner's Manual
IMPORTANT SAFETY INSTRUCTIONS
arranged so it will not drape over a laptop, etc. Where it can be pulled on by children or tripped over accidentally.
This unit has a long AC cord and other long cord that can easily be tripped on or pulled on, causing injury. Please make sure
it is
arranged so it will not drape over a laptop, etc. Where it can be pulled on by children or tripped over accidentally.
This unit has a long AC cord and other long cord that can easily be tripped on or pulled on, causing injury. Please make sure
it is
1
2
3
INSTALLATION
3
4
1
2
3
Method 1: Assemble the main unit and L Speaker together :
Left Speaker
Supplied
Wooden Stand
Supplied Metallic
Screws and Washers
Method 2: Assemble Main Unit and L Speaker individually :
Main unit
Left Speaker
Supplied
Wooden Stand
Supplied Metallic
Screws and Washers
Lock the Hook on the rear of left
speaker to the Main unit as Fig.
4
This unit can be assembled as the following methods: This unit can be assembled as the following methods:
Main Unit
Left Speaker
Decorative Inserts
Note: We supplied total two Wooden Stands and 4 sets Metallic Screws/Washers.Keep the
excess accessories in this assembly method for future use.
4
The speaker net can be take out and reassembly as the Figure below:
+
Black wire
Red wire
Main Unit
Left Speaker
AC 120V~ 60Hz
SPEAKER
+
ANT
LR
AUX IN 1
OFF
ON
POWER
After above installation, connect the connection wires (Red and Black) from L Speaker to
the Speaker Connectors on the rear of Main Unit as the figure below:
Loading...