Craftsman CMST23201RB, 706101340 Owner’s Manual
OPERATOR'S MAN UAL
Floor Cabinet
Please indicate the following from the service part drawing provided.
Model Number:
Model Description:
*Product you purchased may vary from picture shown.
Caution: Read and follow all Safety Rules and Operating Instructions before first
use of this product. Retain this document for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA
F1651
SAFETY WARNINGS AND CAUTIONS:
• Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage. |
• Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage. |
• DO NOT stand on this product. You may fall which may cause personal injury. |
• DO NOT mount this product on atruck bed or any other moving object. This may cause personal injury or product damage. |
• Appropriately secure this product before moving it with a forklift. |
• DO NOT alter this product in any manner. For example, do not weld external tockbars or attach electrical equipment. This may cause |
product damage or personal injury. |
• Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may cause
personal injury or product damage. |
• DO NOT step on shelves. You may fall which may cause personal injury. |
• Be sure to secure the Floor Cabinet to a studded or concrete wall. Failure to do so may cause the Floor Cabinet to become unstable and |
tip. This may cause personal injury or product damage. |
• The maximum weight for each shelf should be no more than 50 pounds, evenly distributed. |
• The maximum product weight, including contents, should be no more than 250 pounds. /
J
Tools Required:
Socket wrench
3/8" socket
7/16" deep-welt socket
7/16" open end wrench
Square
Screwdriver, Flathead
Screwdriver, Crosstip
Drill
1/8" drill bit
1/4" drill bit
Hardware Included
AA(14)
FF(1)
BB(24)
CC(18) / .......
GG(4)
DD(14)
..................i
EE(38)
HH(1)
JJ(1)
Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts.
efer to Service Parts Drawing for full listing of Service Parts.
)
B
J
C(2).
A(2)
//
/
/
/J
H
D(3)
F
,/
J
E"
/
G
J
f
r
STEP (1):
BB(4)
EE(4)
• Place (1) side (A) with flange side down. Use packaging
material to prevent scratches.
• Insert (2) screws (BB) into middle (2) holes from bottom of
flange on (A).
• Place (1) back (C) over screws in side. Attach using (2) (EE).
• Repeat for remaining side (A) and back (C).
STEP (2):
BB(3)
EE(3)
• Connect assemblies from step 1 using (3) (BB) and (3) (EE).
• Finger tighten.
C
\\\\\\\\\\\\\\\\\\\
A
EE
...... jo-o-JJ "J_
BB
--L r---
\\
\
\
\
\\
\
\
\
BB
EE
,J
r
f
STEP (3):
AA(4)
BB(8)
DD(4)
EE(12)
• Insert top (B) intoone end of assembly and attach using (4)
(AA), (8) (BB), (4) (DD), and (12) (EE).
• Finger tighten.
STEP (4):
;_ " CC(2)
i ,_J'
FF(1)
• Place (1) shelf (D) with top down. Use packaging material to
prevent scratches.
• Install (FF) as shown, using (2) (CC).
• Do not tighten.
/
D
/
/
/
\\
i' CC
/
DD
Use with (AA)
AA
In square
holes
/f ................................
_ CC
/
/
!(f
÷
D
J.
../--/"
BB \ EE
FF
,J
Loading...