Craftsman 973274880 Owner’s Manual

Owner's Manual

II:RRFTSMRN'I

Single Speed / Reversible

318in. PROFESSIONAL CORDLESS DRILL-DRIVER

Model No.

973.274880

_, CAUTION: Read and follow

all Safety Rules and Operating Instructions before first use of

this product,

Sears; Roebuck and Co., Hoffman Estates, IL 60179 USA

972000-523

5-98

NRTL

• Warranty ......................................................................................................................................................... 2

• Introduction and Product Specifications......................................................................................................... 2

• Rules For Safe Operation ........................................................................................................................... 3-5

A. Important Safety Rules For Battery Tools .............................................................................................. 4

B. Important Safety Instructions For Charger ............................................................................................. 4

C. Important Information For Recharging Hot Batteries ............................................................................. 5

• Accessodes .................................................................................................................................................... 6

• Features ......................................................................................................................................................... 6

• Operation ................................................................................................................................................... 7-12

• Maintenance ................................................................................................................................................. 13

• Battery Pack Removal and Preparation For Recycling ................................................................................ 14

• Exploded View and Repair Parts List........................................................................................................... 15

• Parts Ordedng / Service ............................................................................................................................... 16

FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL CORDLESS DRILL-DRIVER If this CRRFTSMRNProfessional Cordless Ddll-Ddver fails due to a defect in material or workmanship within one

year from the date of purchase, Sears will repair it, free of charge.

WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE IN THE UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

Your driU-ddver has many features for making drilling operations more pleasant and enjoyable. Safety,

performance and dependability have been given top pdodty in the design of this ddll-ddver making it easy

to maintain and operate.

_ CAUTION: Carefully read through this entire

owner's manual before using your new drill-driver. Pay close attention to the Rules For Safe

Operation, Warnings and Cautions. If you use your ddll-ddver properly and only for what it is

intended, you will enjoy years of safe, reliable service.

SPECIFICATIONS: Chuck Capacity

Motor Charger Rating

No Load Speed Switch

Charge Rate Maximum Torque

3/8 in.

14.4 Volts DC

120 Volts, 60 Hz, AC Only

0-600 RPM

VariableSpeed - Reversible

1 Hour

130 in. Ibs.

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do

not by themselves eliminate any danger. The Instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

NOTE:

_k WARNING: Do not attempt to operate this tool •

until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or sedous personal injury. Save owner's

manual and review frequently for continuing

safe operation, and instructing others who may

use this tool.

READ ALL INSTRUCTIONS

KNOW YOUR POWER TOOL. Read owner's manual carefully. Leam itsapplications and

limitations as well as the specifi(: potential hazards related to this tool.

GUARD AGAINST ELECTRICAL SHOCK by

preventing body contact with grounded surfaces. For example: Pipes, radiators, ranges, refrigera-

tor enclosures.

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

• AVOID DANGEROUS ENVIRONMENT. Don't use power tool indamp or wet locations or

expose to rain. Keep work area well lit.

• KEEP CHILDREN AND VISITORS AWAY. All • visitors should wear safety glasses and be kept a

safe distance from work area. Do not let visitors contact tool or extension cord.

• STORE IDLE TOOLS. When not in use tools

should be stored in a dry and high or locked-up place - out of the reach of children.

• DON'T FORCE TOOL. It will do the job better

and safer at the rate for which it was designed.

SAFETY ALERT SYMBOL:

Indicateswamingorcaution.May beusedinconjunctionwithothersymbolsorpictographs.

WARNING: Failure to obey a safety waming can result in sarious injury to yourself orto others. Always follow the safety precautions to reduce the risk of fire, electricshock and personal injury.

CAUTION: Failure to obey a safety warning may result in property damage or personal injuryto yourself or to others. Always follow the safety precautions to reduce the dsk of firs, electdc shock

and personal injury.

Advises you of information or instructions vital to the operation or maintenance of the equipment.

USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy duty tool.

Don't use tool for purpose not intended - for example - A circular saw should never be used

for cutting tree limbs or logs.

WEAR PROPER APPAREL. Do not wear loose clothing or jewelry that can get caught in tool's

moving parts and cause personal injury. Rubber gloves and nonskid footwear are recommended

when working outdoors. Wear protective hair

covedng to contain long hair and keep it from being drawn into nearby air vents.

ALWAYS WEAR SAFETY GLASSES. Everyday

eyeglasses have only impact-resistant lenses;

they are NOT safety glasses.

PROTECT YOUR LUNGS. Wear a face mask or

dust mask if operation is dusty.

PROTECT YOUR HEARING. Wear headng protection during extended periods of operation.

SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate tool.

DON'T OVERREACH. Keep proper footing and

balance at all times. Do not use on a ladder or

unstable support.

MAINTAIN TOOLS WITH CARE. Keep tools sharp at all times, and clean for best and safest

performance. Follow instructions for lubdcating and changing accessories.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that

keys and adjustingwrenches are removed from tool before turning it on.

RULES FOR SAFE OPERATION (Continued)

NEVER USE IN AN EXPLOSIVE ATMO- SPHERE. Normal sparking ofthe motor could

ignite flammable liquids, gases, or fumes. KEEP HANDLES DRY, CLEAN, AND FREE

FROM OIL AND GREASE. Always use a clean

cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products or any

strong solvents to clean your tool.

STAY ALERT. Watch what you are doing and

usa common sense. Do not operate tool when

you ere tired. Do not rush. CHECK DAMAGED PARTS. Before further use

of the tool, a guard or other part that is damaged should be carefully checked to determine that it

wi, operate properly and perform its intended function. Check for alignment of moving parts,

binding of moving parts, breakage of parts, mounting, and any other conditionsthat may affect itsoperation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless

indicated elsewhere in this instruction manual. DO NOT USE TOOL IF SWITCH DOES NOT

TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.

DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol, or any medication.

DRILLING OR DRIVING SCREWS INTO ELECTRICAL WIRING IN WALLS, CEILINGS,

OR OTHER AREAS CAN CAUSE THE BIT OR CHUCK TO BECOME ELECTRICALLY LIVE.

Do not touch metal parts when drilling into a wall; grasp only the insulated handle(s) or plastic housing when using this tool. Make sure hidden electrical wiring, water pipes, and mechanical hazards are not inthe path of the bit when drilling into a wall.

• INSPECT FOR and remove all nails from lumber

before drilling.

IMPORTANT SAFETY RULES FOR BATTERY

TOOLS

Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or

when changing accessories.

USE ONLY THE CHARGER PROVIDED WITH YOUR BATTERY TOOL. Do not substitute any

other charger. Use of another charger could

cause batteries to explode causing possible

serious injury.

mMDO NOT PLACE BA'R'ERY TOOLS OR THEIR

BA'R'ERIES NEAR FIRE OR HEAT. They may explode.

DO NOT CHARGE BATTERY TOOL IN A DAMP OR WET LOCATION.

Your battery tool should be charged in a location where the temperature is more than 50°F but

less than 100°F.

B Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets in your eyes, flush them with clean water for at least 10 minutes, then

seek immediate medical attention.

B If carrying your battery tool at your side, make

sure it is not runningand your finger is not on the switch. Avoid accidental starting.

SECURE WORK before applying power. NEVER hold workpiece in your hand or across your legs.

WHEN SERVICING USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

SAVE THESE INSTRUCTIONS. This manual contains important safety and operating

instructions for battery charger part number 977405-000.

Before using battery charger, read all instructions and cautionary markings in this manual, on

battery charger, and product using battery charger.

_ WARNING: To reduce risk of injury, charge only

nickel-cadmium type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

Do not expose charger to rain or snow. Use of an attachment not recommended or sold

by the battery charger manufacturer may result in a risk of fire, electric shock, or injuryto

persons.

To reduce risk of damage to charger body and

cord, pull by charger body rather than cord when disconnecting charger.

Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected

to damage or stress.

RULES FOR SAFE OPERATION (Continued)

An extension cord should not be used unless • absolutely necessary. Use of improper

extension cord could result in a risk of fire and electric shock. If extension cord must be used,

make sure: • a. That pins on plug of extension cord are the

same number, size and shape as those of plug on charger.

b. That extension cord is propedy wired and in •

good electrical condition; and

c. That wire size is large enough for AC

ampere rating of charger as specified below:

Cord Length (Feet) 25' 50' 100' 150' Cord Size (AWG) 16 16 16 14

Note: AWG = Amedcan Wire Gage •

DO NOT OPERATE CHARGER WITH A DAMAGED CORD OR PLUG. If damaged,

have replaced immediately by a qualified

serviceman.

Do not operate charger if ithas received a

sharp blow, been dropped, or otherwise

damaged in any way; take it to a qualified

serviceman.

Do not disassemble charger;,take it to a

qualified serviceman when service or repair is

required, incorrect reassembly may result in a

risk of electric shock or fire.

To reduce risk of electric shock, unplug charger

from outlet before attempting any maintenance

or cleaning. Turning offcontrols will not reduce

this risk.

• Do not use charger outdoors.

• Disconnect charger from power supplywhen

not in use.

SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who

may use this tool. If you loan someone this tool, loan them these instructions also.

_i, Look for this symbol to point out important safety precautions. It means attention!H Your

safety is involved.

IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES

When using your drill-driver continuollsly, the batteries in your battery pack will become hot. You should let a hot

battery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack

becomes discharged and is hot, this will cause the yellow and green lights on your battery charger to come on instead of the red light. The yellow and green lights indicate soft start mode and will switch to green only, indicat-

ing slow charge mode. The red light indicates fast charge mode, 1 hour charge time. The green light indicates slow charge mode, requiring overnight charging for batteries to reach full charge. If the green lightcomes on

after letting battery pack cool down, remove itfrom charger for additional cooling. Once the battery pack cools down, you can recharge battery pack in fast charge mode as normal. Do not leave a hot battery pack in charger until it cools down. The green light will not go off when battery pack cools. If fast charge mode is desired, you must physically remove a hot battery pack from the charger, let it cool, then place it back in charger after it has

cooled down. Note: This situation only occurs when continuous use of your drill causes the batteries to become hot. It does

not occur under normal circumstances. Refer to "CHARGING YOUR DRILL-DRIVER" for normal recharging of batteries. If the charger does not charge your battery pack under normal cimumstances, return both the battery

pack and charger to your nearest Sears repair center for electrical check.

,_ WARNING:

The operation of any power too! can result in foreign objects being thrown intoyour eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses

with side shields, available at Sears Retail Stores.

+ 11 hidden pages