Craftsman 973114150 Owner’s Manual

Operator's Manual

3/8 in., 16.8 VOLT CORDLESS DRILL-DRIVER

Variable Speed / Reversible

Model No.

973.114150

Save this manual for future reference

,& CAUTION: Read and follow all

Safety Rules and Operating Instructions before first use of this product.

Customer Help Line: 1-800-932-3188

Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman

983000-069

6-02

• Safety

• Features

• Operation

• Maintenance

• Parts List

• Tablte Of Contents .......................................................................................................................................................... 2

• Warranty ......................................................................................................................................................................... 2

• Introduction ........................................................................................................................ 3

• General Safety Rules, Specific Safety Rules, And Symbols ..................................................................................... 3-6

• Product Specifications ........................................................................................................... 7

• Features ..................................................................................................................................................................... 7-8

• Operation .................................................................................................................................................................. 9-14

• Maintenance ..................................................................................................................... 15

• Accessories ...................................................................................................................... 15

• Exploded View And Repair Parts List ........................................................................................ 17

• Parts Ordering / Service .............................................................................................................................................. 18

FULL ONE YEAR WARRANTY ON CRAFTSMAN 3/8 in. CORDLESS DRILL-DRWER ff this [:RI_FI'._MRN3/8 in. Cordless Drill-Driver fails to give complete satisfaction within one year from the date of pur-

chase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.

ff this CRnFI'$MRN 3/8 in. Cordless Drill-Driver is used for commercial or rental purposes, this warranty applies for only

90 days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

_IL involved.L°°kfor this symbol to point out important safety precautions. It means attentionH! Your safety is

_IL WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail Stores. Always wear eye protection which is marked to comply with ANSI Z87.1.

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product.

Read the operator's manual for complete safety, assembly, operating and maintenance, and repair information.

MEANING

Do not expose to rain or use in damp locations.

Yourdrill-driverhasmanyfeaturesformakingyourdrilling operationsmorepleasantandenjoyable.Safety, performanceanddependabilityhavebeengiventop priorityinthedesignofthisdrill-drivermakingiteasyto maintainandoperate.

CAUTION:Carefullyreadthroughthisentire operator'smanualbeforeusingyournewdrill-driver.

PaycloseattentiontotheGeneralSafetyRules, SpecificSafetyRules/ Symbols, Warnings and

Cautions. If you use your drill-driver properly and only for it's intended use, you will enjoy years of safe,

reliable service.

_L WARNING: Read and understand all instructions.

Failure to follow all instructionslisted below, may result in electric shock, fire and/or serious personal

injury.

SAVE THESE INSTRUCTIONS Work Area

• Keep your work area clean and well lit. Cluttered benches and dark areas inviteaccidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you

to lose control.

Electrical Safety

Do not abuse the cord. Never use the cord to carry

the charger. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords

immediately. Damaged cords may create a fire. A battery operated tool with integral batteries or a

separate battery pack must be recharged only with the specified charger for the battery. A charger that

may be suitable for one type of battery may create a risk of fire when used with another battery. Use battery

only with charger listed.

MODEL BATTERY PACK CHARGING ASSEMBLY

973.114150 ITEM NO. 9 11368 ITEM NO.9 11369 (1323414) (1425009)

Use battery operated tool only with specifically

designated battery pack. Use of any other batteries

may create a risk of fire. Use only with battery pack listed.

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do

not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inatten-

tion while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is in the

locked or off position before inserting battery pack. Carrying tools with your finger on the switch or

inserting the battery pack into a tool with the switch on, invites accidents.

• Remove adjusting keys or wrenches before turn- ing the tool on. A wrench or a key that is left attached

to a rotating part of the tool may result in personal injury.

• Do net overreach. Keep proper footing and bal- ance at all times. Proper footing and balance enables

better control of the tool in unexpected situations. Do

not use on a ladder or unstable support.

• Use safety equipment. Always wear eye protection.

Dust mask, nonskid safety shoes, hard hat, or hearing

protection must be used for appropriate conditions.

Tool Use and Care

• Use clamps or other practical way to secure and • support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

• Do not force tool. Use the correct tool for your application. The correct tool willdo the job better and safer at the rate for which it is designed.

• Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is

dangerous and must be repaired.

• Disconnect battery pack from tool or place the switch

in the locked or off position before making any adjust- ments, changing accessories, or storing the tool. Such

preventivesafety measures reduce risk of starting thetool Service

accidentally.

• Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands

of untrained users.

• When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause sparks, burns, or a fire.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp

cutting edges are less likely to bind and are easier to control.

• Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that may affect the tool's operation, if damaged, have the tool

serviced before using. Many accidents are caused by poorly maintained tools.

• Use only accessories that are recommended by the manufacturer for your model. Accessories that

may be suitable for one tool, may create a risk of injury

when used on another tool.

• Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

• When servicing a tool, use only identical replace-

ment parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or

failure to follow Maintenance Instructions may create a

risk of shock or injury.

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

Additional Rules For Safe Operation

Know your power tool. Read operator's manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of

electric shock, fire, or serious injury.

• Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gage size (A.W.G.) of at least 16 is

recommended for an extension cord 100 feet or less in length. A cord exceeding 100 feet is not recom-

mended. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. An

undersized cord will cause a drop in line voltage result- ing in loss of power and overheating.

Important Rules for Battery Tools

• Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when chang- ing accessories. Following this rule will reduce the

risk of electric shock, fire, or serious personal injury.

• Do not place battery tools or their batteries near

fire or heat. This will reduce the risk of explosion and possible injury.

,_ WARNING: Batteries vent hydrogen gas and can

explode inthe presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal

injury, never use any cordless product in the pres- ence of open flame. An exploded battery can propel

debris and chemicals. If exposed, flush with water

immediately.

Do not charge battery tool in a damp or wet

location. Following this rule will reduce the risk of electric shock.

For best results, your battery tool should be charged in a location where the temperature is

more than 50°F but less than 100°F. Do not store outside or in vehicles.

Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them

with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will

reduce the risk of serious personal injury.

,_llb WARNING: Never use a battery that has been •

dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped battery immediately. Failure to heed this warning can

result in serious personal injury. •

Save these instructions. This manual contains important safety and operating instructions for

charger. Followingthis rule will reduce the risk of

electric shock, fire, or serious personal injury.

• Before using battery charger, read all instructions •

and cautionary markings in this manual, on battery charger, and product using battery charger. Following this rule will reduce the risk of

electric shock, fire, or serious personal injury.

_CAUTION: To reduce risk of injury, charge only

nickel-cadmium and nickel metal hydride type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

• Do not expose charger to rain or snow. Following this rule will reduce the risk of electric shock, fire, or

serious personal injury.

Use of an attachment not recommended or sold

by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

• To reduce risk of damage to charger body and

cord, pull by charger plug rather than cord when disconnecting charger. Following this rule will

reduce the risk of electric shock, fire, or serious

personal injury.

Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected

to damage or stress. Following this rule will reduce the risk of serious personal injury.

An extension cord should not be used unless absolutely necessary. Use of improper extension

cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a. That pins on plug of extension cord are the

same number, size and shape as those of

plug on charger.

b. That extension cord is properly wired and in

good electrical condition; and

c. That wire size is large enough for AC ampere

rating of charger as specified below: Cord Length (Feet) 25' 50' 100' Cord Size (AWG) 16 16 16

Note: AWG = American Wire Gage

Do not operate charger with a damaged cord or

plug. If damaged, have replaced immediately by a qualified serviceman. Followingthisrule will reduce the

risk of electric shock, fire, or serious personal injury.

Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Following

this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. Following this rule will reduce

the risk of electric shock, fire, or serious personal injury.

To reduce the risk of electric shock, unplug charger from outlet before attempting any mainte- nance or cleaning. Turning off controls will not reduce this risk. Following this rule will reduce the

risk of electric shock, fire, or serious personal injury.

• Do not use charger outdoors. Following this rule will reduce the risk of electric shock, fire, or serious

personal injury.

• Disconnect charger from power supply when not

in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

DANGER: RISK OF ELECTRIC SHOCK. DO NOT

TOUCH UNINSULATED PORTION OF OUTPUT CONNECTOR OR UNINSULATED BATTERY TERMINAL.

Save these instructions. Refer to them frequently and use them to instruct others who may use this

tool. If you loan someone this tool, loan them these instructions also. Following this rule will

reduce the risk of electric shock, fire, or serious

personal injury.

_ WARNING: Some dust created by power sanding,

sawing, grinding, drilling, and other construction activities contains chemicals known to cause

cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically- treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAVE THESEINSTRUCTIONS

-- m

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

min Minutes Time

'_ Alternating Current Type or a characteristic of current

Direct Current Type or a characteristic of current

no No Load Speed Rotational speed, at no load

.../min Revolutions or Reciprocation Per Minute Revolutions, strokes,

surface speed, orbits etc. per minute

Safety Alert Symbol Indicates danger, warning or caution.

It means attention!!! Your safety is

involved.

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do

not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs.

,_ DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others.

Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others.

Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

CAUTION: Failure to obey a safety warning may result in property damage or personal injury to

yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

+ 12 hidden pages