Craftsman 973111310 Owner’s Manual

Owner's Manual

II:RRFTSMRN I

Variable Speed / Reversible 3/8 in. CORDLESS DRILL-DRIVER

Model No.

973.111310

Save this manual for

future reference

_, CAUTION: Read and follow all

Safety Rules and Operating In- structions before first use of this

product.

Customer Help Line: 1-800-932-3188

Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman

972000-743

2-00

• Safety

• Features

• Operation

• Maintenance

• Parts List

• Warranty ......................................................................................................................................................... 2

• Introduction and Product Specifications ......................................................................................................... 2

• Rules For Safe Operation ........................................................................................................................... 3-5

A. Important Safety Rules For Battery Tools .............................................................................................. 4

B. Important Safety Instructions For Charger ............................................................................................. 4

C. Important Information For Recharging Hot Batteries ............................................................................. ,5

• Accessories .................................................................................................................................................... 6

• Features ......................................................................................................................................................... 6

• Operation ................................................................................................................................................... 7-13

• Maintenance ................................................................................................................................................. 13

• Battery Pack Removal and Preparation For Recycling ................................................................................ 14

• Exploded View and Repair Parts List ........................................................................................................... 15

• Parts Ordering / Service ............................................................................................................................... 16

FULL ONE YEAR WARRANTY ON CRAFTSMAN 3/8 in. DRILL-DRIVER

If this CRRFTSMAN 3/8 in. Drill-Driver fails to give complete satisfaction within one year from the date of pur-

chase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it,

free of charge. If this CRI_FT$1'4NN3/8 in. Drill-Driver is used for commercial or rental purposes, this warranty applies for only 90

days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

Your drill-driver has many features for making drilling operations more pleasant and enjoyable. Safety,

performance and dependability have been given top priority in the design of this drill-driver making it easy to maintain and operate.

CAUTION: Carefully read through this entire owner's manual before using your new drill-

driver. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your drill-driver properly and only for what it is

intended, you will enjoy years of safe, reliable service.

SPECIFICATIONS:

Chuck Capacity

Motor Charger Rating

No Load Speed Switch

Charge Rate Maximum Torque

3/8 in.

8.4 Volts DC

120 Volts, 60 Hz, AC Only

0 - 600 RPM

Variable Speed / Reversible

3-5 Hours

70 in. Ibs.

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do

not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

Indicatescautionorwarning.Maybeusedinconiunctionwithothersymbolsorpictographs.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment,

,_ WARNING: Do not attempt to operate this •

tool until you have read thoroughly and

understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents

involving fire, electric shock, or serious

personal injury. Save owner's manual and review frequently for continuing safe

operation, and instructing others who may

use this tool.

READ ALL INSTRUCTIONS

KNOW YOUR POWER TOOL. Read owner's manual carefully. Learn its applications and

limitations as well as the specific potential hazards related to this tool.

GUARD AGAINST ELECTRICAL SHOCK by preventing body contact with grounded surfaces.

For example: Pipes, radiators, ranges, refrigera-

tor enclosures.

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

• AVOID DANGEROUS ENVIRONMENT. Don't

use power tool in damp or wet locations or

expose to rain. Keep work area well lit.

• KEEP CHILDREN AND VISITORS AWAY. All

visitorsshould wear safety glasses and be kept a

safe distance from work area. Do not let visitors contact tool or extension cord.

• STORE IDLE TOOLS. When not in use tools should be stored in a dry and high or locked-up place ÷out of the reach of children.

• DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others.

Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

CAUTION: Failure to obey a safety warning may result in property damage or personat injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock

and personal injury.

USE RIGHT TOOL. Don't force small tool or

attachment to do the job of a heavy duty tool.

Don't use tool for purpose not intended - for example - A circular saw should never be used for cutting tree limbs or logs,

WEAR PROPER APPAREL. Do not wear loose clothing or jewelry that can get caught in tool's moving parts and cause personal injury. Rubber

gloves and nonskid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair and keep itfrom

being drawn into nearby air vents. ALWAYS WEAR SAFETY GLASSES. Everyday

eyeglasses have only impact-resistant lenses; they are NOT safety glasses.

PROTECT YOUR LUNGS. Wear a face mask or dust mask if operation is dusty.

PROTECT YOUR HEARING. Wear hearing

protection during extended periods of operation. SECURE WORK. Use clamps or a vise to hold

work, It's safer than using your hand and it frees both hands to operate tool.

DON'T OVERREACH. Keep proper footing and balance at all times, Do not use on a ladder or

unstable support,

MAINTAIN TOOLS WITH CARE. Keep tools

sharp at all times, and clean for best and safest

performance. Follow instructions for lubricating and changing accessories.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that

keys and adjusting wrenches are removed from tool before turning it on,

RULES FOR SAFE OPERATION (Continued)

• NEVER USE IN AN EXPLOSIVE ATMO- • SPHERE. Normal sparking of the motor could

ignite flammable liquids, gases, or fumes.

• KEEP HANDLES DRY, CLEAN, AND FREE • FROM OIL AND GREASE. Always use a clean

cloth when cleaning. Never use brake fluids, • gasoline, petroleum-based products or any

strong solvents to clean your tool.

• STAY ALERT. Watch what you are doing and •

use common sense. Do not operate tool when you are tired. Do not rush.

• CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged

should be carefully checked to determine that it will operate properly and perform its intended

function. Check for alignment of moving parts, •

binding of moving parts, breakage of parts, mounting, and any other conditions that may

affect its operation. A guard or other part that is damaged should be properly repaired or •

replaced by an authorized service center unless indicated elsewhere in this instruction manual.

• DO NOT USE TOOL IF SWITCH DOES NOT

TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.

• DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs,

alcohol, or any medication.

• DRILLING OR DRIVING SCREWS INTO

ELECTRICAL WIRING IN WALLS, CEILINGS,

OR OTHER AREAS CAN CAUSE THE BIT OR

CHUCK TO BECOME ELECTRICALLY LIVE.

Do not touch metal parts when drilling into a wall; grasp only the insulated handle(s) or plastic housing when using this tool. Make sure hidden

electrical wiring, water pipes, and mechanical hazards are not in the path of the bit when

drilling into a wall.

• INSPECT FOR and remove all nails from lumber before drilling.

IMPORTANT SAFETY RULES FOR BATTERY TOOLS

Battery tools do nothave to be plugged into an

electrical outlet; therefore, they are always in operating condition. Be aware of possible

hazards when not using your battery tool or

when changing accessories,

USE ONLY THE CHARGER PROVIDED WITH YOUR BATTERY TOOL. Do not substitute any

other charger. Use of another charger could cause batteries to explode causing possible serious injury.

DO NOT PLACE BATTERY TOOLS OR THEIR BATTERIES NEAR FIRE OR HEAT. They may

explode. DO NOT CHARGE BATTERY TOOL IN A

DAMP OR WET LOCATION.

Your battery tool should be charged in a location where the temperature is more than 50°F but

less than 100'_F. Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in contact with your skin, wash immediately with

soap and water, then neutralize with lemon juice or vinegar. If liquid gets in your eyes, flush them

with clean water for at least 10 minutes, then seek immediate medical attention.

If carrying your battery tool at your side, make sure it is not running and your finger is not on the switch. Avoid accidental starting.

SECURE WORK before applying power. NEVER hold workpiece in your hand or across your legs.

WHEN SERVICING USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

• SAVE THESE INSTRUCTIONS. This manual contains important safety and operating

instructions for battery charger item number 9-11018.

Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery

charger.

WARNING: To reduce risk of injury, charge only

nickel-cadmium type rechargeable batteries.

Other types of batteries may burst causing

personal injuryand damage.

• Do not expose charger to rain or snow.

• Use of an attachment not recommended or sold by the battery charger manufacturer may result

in a risk of fire, electric shock, or injury to persons.

• To reduce risk of damage to charger body and cord, pull by charger body rather than cord when

disconnecting charger.

• Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise subjected

to damage or stress.

RULES FOR SAFE OPERATION (Continued)

An extension cord should not be used unless •

absolutely necessary. Use of improper extension cord could result in a risk of fire and

electric shock. If extension cord must be used, make sure: •

a. That pins on plug of extension cord are the

same number, size and shape as those of plug on charger

b. That extension cord is properly wired and in •

good electrical condition; and

c. That wire size is large enough for AC

ampere rating of charger as specified below:

Cord Length (Feet) 25 ft. 50 It. 100 ft. Cord Size (AWG) 16 16 16

Note: AWG = American Wire Gage

• DO NOT OPERATE CHARGER WITH A DAMAGED CORD OR PLUG. 14damaged, have replaced immediately by a qualified serviceman.

Do not operate charger if it has received a

sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified

serviceman. Do not disassemble charger; take it to a

qualified serviceman when service or repair is required. Incorrect reassembly may result in a

risk of electric shock or fire. To reduce risk of electric shock, unplug charger

from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.

• Do not use charger outdoors.

• Disconnect charger from power supply when net in use.

SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who

may use this tool. If you loan someone this tool, loan them these instructions also.

,_ Look for this symbol to point out important safety precautions. It means attention!!! Your

safety is involved.

IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES

When using your drill-driver continuously, the batter- ies =nyour battery pack will become hot. You should

let a hot battery pack cool down for approximately 30 minutes before attempting to recharge.

Note: This situation only occurs when continuous use of your drill causes the batteries to become hot. It

does not occur under normal circumstances. Refer to "CHARGING YOUR DRILL-DRIVER" for normal

recharging of batteries. If the charger does not charge

your battery pack under normal circumstances, return both the battery pack and charger to your nearest

Sears repair center for electrical check.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed, We

recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail Stores.

+ 11 hidden pages