Craftsman 973.111291 User Manual

Owner's Manual

3/8 in., 14.4 VOLTS CORDLESS DRILL-DRIVER

Variable Speed / Reversible

Model No.

973.111291

Save this manual for future reference

^ CAUTION: Read and follow all

Safety Rules and Operating In structions before first use of this

product.

Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA

Visit the Craftsman web page: www.sears.com/craftsman

972000-830

12-00

• Safety

• Features

• Operation

• Maintenance

• Parts List

Warranty...........................................................................................................................................................2

Introduction and Product Specifications..........................................................................................................2

Rules For Safe Operation.............................................................................................................................3-5

A. Important Safety Rules For Battery Tools................................................................................................4

B. Important Safety Instructions For Charger

C. Important Information For Recharging Hot Batteries...............................................................................5

Accessories......................................................................................................................................................6

Features...........................................................................................................................................................6

Operation....................................................................................................................................................7-12

Maintenance.................................................................................................................................................. 12

Battery Pack Removal and Preparation For Recycling.................................................................................13

Exploded View and Repair Parts List............................................................................................................15

Parts Ordering / Service................................................................................................................................ 16

..............................................................................................

WARRANTY

FULL ONE YEAR WARRANTY ON CRRFTSMRN 3/8 in. CORDLESS DRILL-DRIVER

If this CRRFTSMRN 3/8 in. Cordless Drill-Driver fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.

If this CRRFT5MRN 3/8 in. Cordless Drill-Driver is used for commercial or rental purposes, this warranty applies

for only 90 days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179

INTRODUCTION

Your drill-driver has many features for making drilling operations more pleasant and enjoyable. Safety, performance and dependability have been given top priority in the design of this drill-driver making it easy to maintain and operate.

CAUTION: Carefully read through this entire

owner’s manual before using your new drill-driver. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your drill-driver properly and only for what it is intended, you will enjoy years of safe, reliable service.

SPECIFICATIONS:

Chuck Capacity Motor Charger Rating No Load Speed Switch Charge Rate Maximum Torque

3/8 in.

14.4 Volt DC

120 Volts, 60 Hz, AC Only

0 - 600 RPM

Variable Speed - Reversible

3 - 5 Hours 135 in. lbs.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We

recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses

with side shields, available at Sears Retail Stores.

RULES FOR SAFE OPERATION

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do

not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

Indicates warning or caution. May be used in conjunction with other symbols or pictographs.

WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others.

SAFETY ALERT SYMBOL:

Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

CAUTION: Failure to obey a safety warning may result in property damage or personal injury to

yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

NOTE;

Advises you of information or instructions vital to the operation or maintenance of the equipment.

A WARNING: Do not attempt to operate this tool

until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save owner's manual and review frequently for continuing safe operation, and instructing others who may use this tool.

READ ALL INSTRUCTIONS

■ KNOW YOUR POWER TOOL. Read owner's manual carefully. Learn its applications and limitations as well as the specific potential

hazards related to this toot.

■ GUARD AGAINST ELECTRICAL SHOCK by

preventing body contact with grounded surfaces. For example: Pipes, radiators, ranges, refrigera tor enclosures,

■ KEEP WORK AREA CLEAN. Cluttered areas

and benches invite accidents.

■ AVOID DANGEROUS ENVIRONMENT. Don't use power tool in damp or wet locations or^

expose to rain. Keep work area well lit.

■ KEEP CHILDREN AND VISITORS AWAY. All

visitors should wear safety glasses and be kept a

safe distance from work area. Do not let visitors contact tool or extension cord.

■ STORE IDLE TOOLS. When not in use tools should be stored in a dry and high or locked-up place - out of the reach of children.

■ DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy duty tool. Don't use tool for purpose not intended - for example - A circular saw should never be used for cutting tree limbs or logs.

WEAR PROPER APPAREL. Do not wear loose clothing or jewelry that can get caught in tool's

moving parts and cause personal injury. Rubber gloves and nonskid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair and keep it from being drawn into nearby air vents.

ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses.

PROTECT YOUR LUNGS. Wear a face mask or

dust mask if operation is dusty.

PROTECT YOUR HEARING. Wear hearing protection during extended periods of operation.

SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate tool.

DON'T OVERREACH. Keep proper footing and

balance at all times. Do not use on a iadder or

unstable support,

MAINTAIN TOOLS WITH CARE. Keep tools sharp at all times, and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from

tool before turning it on.

RULES FOR SAFE OPERATION (Continued)

■ NEVER USE IN AN EXPLOSIVE ATMO SPHERE. Normal sparking of the motor could ignite flammable liquids, gases, or fumes.

■ KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products or any strong solvents to clean your tool.

■ STAY ALERT. Watch what you are doing and use common sense. Do not operate tool when

you are tired. Do not rush.

■ CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts,

binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this instruction manual.

■ DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.

■ DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol, or any medication.

■ DRILLING OR DRIVING SCREWS INTO

ELECTRICAL WIRING IN WALLS, CEILINGS,

OR OTHER AREAS CAN CAUSE THE BIT OR

CHUCK TO BECOME ELECTRICALLY LIVE. Do not touch metal parts when drilling into a wall; grasp only the insulated handle(s) or plastic housing when using this tool. Make sure hidden electrical wiring, water pipes, and mechanicai hazards are not in the path of the bit when drilling into a wall.

■ INSPECT FOR and remove all nails from lumber before drilling.

IMPORTANT SAFETY RULES FOR BATTERY

TOOLS

■ Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories.

■ USE ONLY THE CHARGER PROVIDED WITH YOUR BATTERY TOOL. Do not substitute any other charger. Use of another charger could cause batteries to explode causing possible serious injury.

■ DO NOT PLACE BATTERY TOOLS OR THEIR BATTERIES NEAR FIRE OR HEAT. They may explode.

■ DO NOT CHARGE BATTERY TOOL IN A DAMP OR WET LOCATION.

■ Your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F.

■ Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice

or vinegar. If liquid gets in your eyes, flush them

with clean water for at least 10 minutes, then

seek immediate medical attention.

■ If carrying your battery tool at your side, make sure it is not running and your finger is not on the switch. Avoid accidental starting.

■ SECURE WORK before applying power. NEVER

hold workpiece in your hand or across your legs.

■ WHEN SERVICING USE ONLY IDENTICAL

CRAFTSMAN REPLACEMENT PARTS.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

m SAVE THESE INSTRUCTIONS. This manual

contains important safety and operating

instructions for battery charger item number

a-11012 (981481-001).

■ Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger.

A WARNING: To reduce risk of injury, charge only

nickel-cadmium type rechargeable batteries. Other types of batteries may burst causing

personal injury and damage.

■ Do not expose charger to rain or snow.

■ Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

■ To reduce risk of damage to charger body and cord, pull by charger body rather than cord when disconnecting charger.

■ Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise subjected

to damage or stress.

RULES FOR SAFE OPERATION (Continued)

An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

That pins on plug of extension cord are the

same number, size and shape as those of plug on charger.

That extension cord is properly wired and in good electrical condition: and

That wire size is large enough for AC

ampere rating of charger as specified

below: Cord Length (Feet) 25’ 50' 100’ Cord Size (AWG) 16 16 16 Note: AWG = American Wire Gage DO NOT OPERATE CHARGER WITH A

DAMAGED CORD OR PLUG. If damaged, have replaced immediately by a qualified serviceman.

Do not operate charger if it has received a

sharp blow, been dropped, or otherwise

damaged in any way; take it to a qualified serviceman.

Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.

Do not use charger outdoors. Disconnect charger from power supply when

not in use.

SAVE THESE INSTRUCTIONS. Refer to them

frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

WARNING: Some dust created by power

sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints.

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these

chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

A Look for this symbol to point out important safety precautions. It means attention!!! Your safety is

involved.

SAVE THESE INSTRUCTIONS

IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES

When using your drill-driver continuously, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge.

Note: This situation only occurs when continuous use of your drill causes the batteries to become hot. It does not occur under normal circumstances. Refer to ’’CHARGING BATTERY PACK" for normal recharging of batteries. If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest Sears repair center for electrical check.

+ 11 hidden pages