Craftsman 917388061 Owner’s Manual

Owner's Manual

ICReFTSMnN ,I

ROTARY LAWN MOWER

6.0 Horsepower

21" Rear Discharge

Model No.

917.388061

• Espa5ol, p. 18

CAUTION:

Readand follow all

Safety Rulesand Instructions

before operating thisequipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Visit our Craftsman website: www.sears,com/craftsman

Warranty ................................................... 2

Safety Rules .......................................... 2-4

Product Specifications .............................. 4

Assembly / Pre-Operation ........................ 6

Operation ............................................. 7-10

Maintenance Schedule ........................... 11

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER For two years from date of purchase, when this Craftsman Lawn Mower is maintained,

lubricated, and tuned up according to the operating and maintenance instructions in the

owner's manual, Sears will repair free of charge any defect in material or workmanship.

If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty

applies for only 90 days from the date of purchase. This Warranty does not cover:

° Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

° Repairs necessary because of operator abuse or negligence, including bent crank-

shafts and the failure to maintain the equipment according to the instructions con- tained in the owner's manual.

Maintenance ...................................... 11-13

Service and Adjustments ........................ 14

Storage .............................................. 15-16

Troubleshooting ................................. 16-17

Repair Parts ....................................... 34-39

Sears Service .......................... Back Cover

Warranty service is available by returning the Craftsman power mower to the nearest Sears

Parts & Repair Center in the United States. This warranty applies only while this product is used in the United States.

This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck And Co., D/817 WA, Heffman Estates, IL 60179

IMPORTANT: This cutting machine is capable of amputating hands and feet and throw- ing objects. Failure to observe the following safety instructions could result in serious injury or death.

iLLoek for this symbol to point out impor- tant safety precautions. It means CAU-

TION!!{ BECOME ALERT!!{ YOUR SAFETY IS INVOLVED.

_I,WARNING: In order to prevent ac- cidental starting when setting up, trans-

porting, adjusting or making repairs, al-

ways disconnect spark plug wire and place wire where it cannot contact spark plug.

_'I,WARNING: Engine exhaust, some of its constituents, and certain vehicle compo-

nents contain or emit chemicals known to

the State of California to cause cancer and

birth defects or other reproductive harm.

Ate,WARNING: Battery posts, terminals and

related accessories contain lead and lead compounds, chemicals known to the State

of California to cause cancer and birth defects or other reproductive harm. Wash

hands after handling.

A CAUTION: Muffler and other engine

parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact,

stay away from these areas.

I. GENERAL OPERATION

• Read, understand, and follow all instructions on the machine and in the

manual(s) before starting. Be thoroughly familiar with the controls and the proper

use of the machine before starting.

° Do not put hands or feet near or under

rotating parts. Keep clear of the dis- charge opening at all times.

° Only allow responsible individuals, who

are familiar with the instructions, to oper- ate the machine.

° Clear the area of objects such as rocks,

toys, wire, bones, sticks, etc., which could be picked up and thrown by the

blade.

° Be sure the area is clear of other people

before mowing. Stop machine if anyone enters the area.

° Do not operate the mower when bare-

foot or wearing open sandals. Always wear substantial foot wear.

° Do not pull mower backwards unless

absolutely necessary. Always look down and behind before and while moving

backwards.

° Do not operate the mower without

proper guards, plates, grass catcher or other safety protective devices in place.

° See manufacturer's instructions for

proper operation and installation of accessories. Only use accessories ap-

proved by the manufacturer.

° Stop the blade(s) when crossing gravel

drives, walks, or roads.

° Stop the engine (motor) whenever you

leave the equipment, before cleaning the mower or unclogging the chute.

° Shut the engine (motor) off and wait until

the blade comes to complete stop before removing grass catcher.

° Mow only in daylight or good artificial

light.

° Do not operate the machine while under

the influence of alcohol or drugs.

° Never operate machine in wet grass.

Always be sure of your footing: keep a firm hold on the handle and walk; never

run.

° Disengage the self-propelled mech-

anism or drive clutch on mowers so equipped before starting the engine

(motor).

° If the equipment should start to vibrate

abnormally, stop the engine (motor) and check immediately for the cause. Vibra- tion is generally a warning of trouble.

° Always wear safety goggles or safety

glasses with side shields when operating mower.

II. SLOPE OPERATION Slopes are a major factor related to slip

and fall accidents which can result in severe injury. All slopes require extra cau- tion. If you feel uneasy on a slope, do not

mow it.

DO:

° Mow across the face of slopes: never

up and down. Exercise extreme caution

when changing direction on slopes.

° Remove obstacles such as rocks, tree

limbs, etc.

° Watch for holes, ruts, or bumps. Tall

grass can hide obstacles.

DO NOT:

• Do not trim near drop-offs, ditches or embankments. The operator could lose

footing or balance.

° Do not trim excessively steep slopes. ° Do not mow on wet grass. Reduced foot-

ing could cause slipping.

III. CHILDREN Tragic accidents can occur if the operator

is not alert to the presence of children. Children are often attracted to the machine

and the mowing activity. Never assume that children will remain where you last

saw them.

• Keep children out of the trimming area and under the watchful care of another

responsible adult.

• Be alert and turn machine off if children enter the area.

• Before and while walking backwards, look behind and down for small children.

• Never allow children to operate the ma- chine.

• Use extra care when approaching blind corners, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICE

• Use extra care in handling gasoline and other fuels. They are flammable and

vapors are explosive.

- Use only an approved container.

- Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

Do not smoke.

- Never refuel the machine indoors.

- Never store the machine or fuel container inside where there is an open flame, such as a water heater.

• Never run a machine inside a closed area.

• Never make adjustments or repairs with the engine (motor) running. Disconnect the

spark plug wire, and keep the wire away

3 from the plugto prevent accidental starting.

° Keepnutsandbolts,especiallyblade

attachmentbolts,tightand keepequip- mentingood condition.

° Nevertamperwithsafetydevices.Check

theirproperoperationregularly.

• Keep machine free of grass, leaves,or otherdebrisbuild-up.Cleanoilorfuelspill- age.Allowmachinetocoolbeforestoring.

° Stop andinspecttheequipmentifyou

strikean object.Repair,if necessary, beforerestarting.

° Neverattempttomakewheelheightadjust-

° Grasscatchercomponentsaresubject

to wear,damage,anddeterioration, whichcouldexposemovingpartsor allowobjectsto be thrown.Frequently checkcomponentsand replacewith

manufacturer'srecommendedparts,

whennecessary.

° Mowerbladesaresharpandcan cut.

Wraptheblade(s)or wear gloves,and

useextracautionwhenservicingthem.

° Donotchangethe enginegovernorset-

ting or overspeedthe engine.

mentswhiletheengine(motor)isrunning.

SerialNumber: Dateof Purchase:

GasolineCapacity/Type: 1.6Quarts(UnleadedRegular) OilType(API-SF-SJ): SAE30 (above32°F);SAE5W-30(below32°F)

OilCapacity: 20 Ounces SparkPlug(Gap: .030") Champion RJ19LM or J19LM

Blade Bolt Torque: 35-40 ft. Ibs.

• The model and serial numbers will be found on a decal on the rear of the lawn mower housing. Record both serial number and date of purchase in space provided above.

Repair Protection Agreements

Congratulations on making a smart pur- chase. Your new Craftsman® product is

designed and manufactured for years of dependable operation. But like all prod-

ucts, it may require repair from time to time. That's when having a Repair Protec- tion Agreement can save you money and aggravation.

Purchase a Repair Protection Agreement

now and protect yourself from unexpected

hassle and expense.

Here's what's included in the Agreement:

• Expert service by our 12,000 profe-

sional repair specialists.

• Unlimited service and no charge for

parts and labor on all covered repairs.

• Product replacement if your covered

product can't be fixed.

• Discount of 10% from regular price of

service and service-related parts not covered by the agreement; also, 10% off regular price of preventive mainte-

nance check.

Fast help by phone - phone support from a Sears technician on products

requiring in-home repair, plus conve- nient repair scheduling.

Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service ap- pointment online. Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories. That's the kind of professionalism you can count on to help prolong the life of your new purchase for years to come. Purchase

your Repair Protection Agreement today{

Some limitations and exclusions apply.

For prices and additional information

call 1-800-827-6655. Sears Installation Service

For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in

the U.S.A. call 1-800-4-MY-HOME®.

These accessories were available when this lawn mower was produced. They are not shipped with your mower, They are also available at most Sears retail outlets and service centers. Some of these accessories may not apply to your lawn mower.

LAWN MOWER PERFORMANCE

CLIPPING

DEFLECTORS

FOR

REAR DISCHARGE

LAWN MOWERS

STABILIZER

_\ \\ FOR

_\ LAWN MOWERS

\\ GRASS CATCHERS

REAR DISCHARGE

GRASS CATCHERS

FOR

SIDE DISCHARGE

LAWN MOWERS

LAWN MOWER MAINTENANCE

MUFFLERS AIR FILTERS SPARK PLUGS

BELTS BLADES BLADE ADAPTERS WHEELS ENGINE OIL

Read these instructions and this manual in its entirety before you attempt to assemble

or operate your new lawn mower.

IMPORTANT: This lawn mower is shipped

WITHOUT OIL OR GASOLINE inthe engine. Your new lawn mower has been as-

sembled at the factory with the excep- tion of those parts left unassembled for shipping purposes. To ensure safe and

proper operation of your lawn mower, all

parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. All parts such as nuts, washers, bolts, etc.,

necessary to complete the assembly have

been placed in the parts bag.

TO REMOVE LAWN MOWER FROM

CARTON

1. Remove loose parts included with mower,

2. Cut down two end corners of carton and lay end panel down flat.

3. Remove all packing materials except padding between upper and lower

handle and padding holding operator presence control bar to upper handle.

4. Roll lawn mower out of carton and check carton thoroughly for additional

loose parts,

Operator presence control bar

LIFT

Mowing position

Lower handle

TO ASSEMBLE GRASS CATCHER

1. Put grass catcher frame into grass bag with rigid part of bag on the bottom.

Make sure the frame handle is outside of the bag top.

2. Slip vinyl bindings over frame. NOTE: If vinyl bindings are toe stiff, hold

them in warm water for a few minutes. If bag gets wet, let it dry before using.

Catcher frame

handle

HOWTO SET UPYOUR LAWN MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

1. Raise handles until lower handle sec- tion locks into place in mowing position.

2. Remove protective padding, raise up- per handle section into place on lower

handle and tighten both handle knobs.

3. Remove handle padding holding operator presence control bar to upper

handle.

Your lawn mower handle can be adjusted for your mowing comfort. Refer to "AD- JUST HANDLE" in the Service and Adjust-

merits section of this manual.

Frame

opening

TO INSTALL ATTACHMENTS Your lawn mower was shipped ready to

be used as a mulcher. To convert to bag- ging, see "TO CONVERT MOWER" in the Operation section of this manual.

KNOWYOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING

YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for

future reference.

These symbols may appear on your lawn mower or in literature supplied with the

product. Learn and understand their meaning.

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

_resence eontroI bar

Startc handle

Gruss

catcher

Muffler

Gasoline filler cap

Air filte_

Primer (on each wheel)

Wheel adjuster

IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the

American National Standards Institute and the U.S. Consumer Product Safety Com-

mission. The blade turns when the engine is running, Operator presence control bar - must Primer - pumps additional fuel from the

be held down to the handle to start the carburetor to the cylinder for use when engine. Release to stop the engine, starting a cold engine. Starter handle- used for starting engine. 7

Theoperationof any lawn mowercanresultin foreign objectsthrownintothe eyes,whichcan resultin

severeeye damage.Always wearsafetyglassesor eyeshieldswhile operatingyour lawnmowerorperforming anyadjustmentsor repairs.We recom- menda standardsafetyglassesor wide

visionsafetymaskworn overspectacles.

HOWTO USEYOUR LAWN MOWER ENGINE SPEED

The engine speed was set at the factory for optimum performance. Speed is not adjustable.

ENGINE ZONE CONTROL

_,CAUTION: Federal regulations require

an engine control to be installed on this lawn mower in order to minimize the

risk of blade contact injury. Do not under any circumstances attempt to defeat the

function of the operator control. The blade turns when the engine is running.

• Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit

your requirements. Medium position is

best for most lawns.

• To change cutting height, squeeze ad-

juster lever toward wheel. Move wheel

up or down to suit your requirements. Be sure all wheels are in the same set-

ting.

NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped) allow lever to be positioned between the plate tabs.

LEVER BACKWARD

TO LOWER MOWER

Plate t_

TO CONVERT MOWER

Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging:

• Lift rear door of the lawn mower and place the grass catcher frame hooks

onto the door pivot pins.

• To convert to mulching operation, re-

Ai:move grass catcher and close rear door.

CAUTION: Do not run your lawn mower

without rear door closed, clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open.

Pivot Rear Grass

catcher

handle

Catcher frame hook TO EMPTY GRASS CATCHER

1. Lift up on grass catcher using the frame handle.

2. Remove grass catcher with clippings from under lawn mower handle.

3. Empty clippings from bag using both frame handle and bag handle.

NOTE: Do not drag the bag when empty- ing; it will cause unnecessary wear.

Grass

catcher

frame

handle

Bag handle

LEVER FORWARD TO RAISE MOWER Lever

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to

use, see "ENGINE" in the Maintenance

section of this manual. _k CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler

on startup.

1. Be sure lawnmower is level.

2. Remove oil dipstick from oil fill spout.

3. You receive a container of oil with the unit. Slowly pour the entire container

down the oil fill spout into the engine.

4. Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick.

• Change the oil after every 25 hours of

operation or each season. You may need to change the oil more often under dusty, dirty conditions. See "TO

CHANGE ENGINE OIE' in the Mainte- nance section of this manual.

ADD GASOLINE

• Fill fuel tank to bottom of tank filler neck.

Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel fresh-

Ness.

_k CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

CAUTION: Alcohol blended fuels

(called gasohol or using ethanol or metha-

nol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start

the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel

next season. See Storage Instructions for additional information. Never use engine

or carburetor cleaner products in the fuel tank or permanent damage may occur.

_Engine

filler cap ___j.__

Prirner-"_ ",<..__1

TO STOP ENGINE

• To stop engine, release operator pres- ence control bar.

TO START ENGINE NOTE: Due to protective coatings on the

engine, a small amount of smoke may be present during the initial use of the prod-

uct and should be considered normal.

1. To start a cold engine, push primer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few

minutes.

2. Hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

NOTE: In cooler weather it may be neces- sary to repeat priming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempt- ing to start and do not repeat priming steps.

MOWING TIPS

• Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing

effort and to keep from overloading the engine and leaving clumps of grass clip-

pings. It may also be necessary to re- duce ground speed and/or run the lawn

mower over the area a second time.

° For extremely heavy cutting, reduce the

width of cut by overlapping previously cut path and mow slowly.

° For better grass bagging and most cut-

ting conditions, the engine speed should be set in the FAST position.

° When using a rear discharge lawn

mower in moist, heavy grass, clumps of cut grass may not enter the grass catcher. Reduce ground speed (pushing speed) and/or run the lawn mower over

the area a second time.

° If a trail of clippings is left on the right

side of a rear discharge mower, mow in a clockwise direction with a small over-

lap to collect the clippings on the next pass.

° Pores in cloth grass catchers can be-

come filled with dirt and dust with use and catchers will collect less grass. To

prevent this, regularly hose catcher off with water and let dry before using.

° Keep top of engine around starter clear

and clean of grass clippings and chaff. This will help engine air flow and extend

engine life.

MULCHING MOWING TIPS

IMPORTANT: For best performance, keep mower housing free of built-up

grass and trash. See "CLEANING" in the Maintenance section of this manual.

° The special mulching blade will recur

the grass clippings many times and

reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the

mulched grass will biodegrade quickly to provide nutrients for the lawn. Always

mulch with your highest engine (blade) speed as this will provide the best recut- ting action of the blades.

° Avoid cutting your lawn when it is wet.

Wet grass tends to form clumps and

interferes with the mulching action. The

best time to mow your lawn is the early afternoon. At this time the grass has dried, yet the newly cut area will not be exposed to direct sunlight.

° For best results, adjust the lawn mower

cutting height so that the lawn mower cuts off only the top one-third of the

grass blades. If the lawn is overgrown it will be necessary to raise the height of

cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of mulched grass. For extremely

heavy grass, reduce your width of cut

by overlapping previously cut path and

mow slowly.

MAX 1/3

° Certain types of grass and grass

conditions may require that an area be

mulched a second time to completely

hide the clippings. When doing a sec- ond cut, mow across (perpendicular) to the first cut path.

° Change your cutting pattern from week

to week. Mow north to south one week then change to east to west the next

week. This will help prevent matting and graining of the lawn.

MAINTENANCE SCHEDULE /_:;,_°_'__y

AS YOU COMPLETE S

Lubrication Ill'

CheckTires I_

Check Drive Wheels (Power-Propelled M_ I_'

Check for Loose Fasteners l## Ik/

Clean/Inspect Grass Catcher

(If Equipped) _

W Clean Lawn Mower I_ t#_

RE Clean Under Drive Cover(Power-Propelled Mowers)

Check drive belt/pulleys (Power-Propelled Mowers)

Check/Sharpen/Replace Blade Clean Battery/Recharge IElectdc Start MowersI

E Check Engine Oil Level

Change Engine Oil

v'3 i/

l/ v',

1_1,2

V'=

GI Clean Air Filter

Inspect Muffler

N Replace Spark Plug

Replace Air Filter Paper Cartridge

1- Change moreoftenwhenopem6ngunderaheavyloador inhighambienttemperatures.

2 - Servicemoraoftenwhen operatingindirtyor dustyconditions, 3 - Replacebladesmoreoftenwhen mowinginsandysoil,

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must

maintain unit as instructed in this manual. Some adjustments will need to be made

periodically to properly maintain your unit.

At least once a season, check to see if you should make any of the adjustments

described in the Service and Adjustments section of this manual.

• At least once a year, replace the spark plug, clean or replace air filter element and check blade for wear. A new spark plug and clean/new air filter element assure proper air-fuel mixture and help your engine run better and last longer.

• Follow the maintenance schedule in this manual.

BEFORE EACH USE

• Check engine oil level.

• Check for loose fasteners.

LU BRICATION

Keep unit well lubricated (See "LUBRICATION CHART").

11graphite type lubricant sparingly.

_ sPray lubricant

See ENGINE in Maintenance section.

IMPORTANT: Do not oil or grease plastic

wheel bearings. Viscous lubricants will attract dust and dirtthatwill shorten the life of

the self-lubricating bearings. Ifyou feel they must be lubricated, use only a dry, powdered

=/=

4 - Charge48 hoursatendofseason.

5 -And a_t each5 hours_ use.

LUBRICATION CHART

Wheel

adjuster (on

each wheel)

ine oil

Rear door

hinge

Handle bracket mounting pins

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

• Keep tires free of gasoline, oil, or insect control chemicals which can harm rub-

ber.

• Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

BLADE CARE For best results, mower blade must be

kept sharp. Replace bent or damaged blades.

TO REMOVE BLADE

1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

2. Turn lawn mower on its side. Make sure air filter and carburetor are up.

3. Use a wood block between blade and mower housing to prevent blade from

turning when removing blade bolt.

NOTE: Protect your hands with gloves

and/or wrap blade with heavy cloth.

4. Remove blade bolt by turning counter- clockwise.

5. Remove blade and attaching hard-

ware (bolt, lock washer and hardened washer).

NOTE: Remove the blade adapter and

check the key inside hub of blade adapter. The key must be in good condition to work

properly. Replace adapter if damaged.

TO REPLACE BLADE

1. Position the blade adapter on the en- gine crankshaft. Be sure key in adapter

and crankshaft keyway are aligned.

2. Position blade on the blade adapter aligning the two (2) holes in the blade

with the raised lugs on the adapter.

3. Be sure the trailing edge of blade (op- posite sharp edge) is up toward the engine.

4. Install the blade bolt with the lock

washer and hardened washer into

blade adapter and crankshaft.

5. Use block of wood between blade and lawn mower housing and tighten the

blade bolt, turning clockwise.

• The recommended tightening torque is

35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with

approved bolt shown in the Repair Parts section of this manual.

Blade adapter Crankshaft

Key ..... keyway

Blade

Blade bolt

/ \

washer Trailing edge Blade adapter

TO SHARPEN BLADE NOTE: We de not recommend sharpening

blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will

cause eventual damage to lawn mower or engine.

• The blade can be sharpened with a file or on a grinding wheel. Do not attempt

to sharpen while on the mower.

• To check blade balance, drive a nail into a beam or wall. Leave about one inch of

the straight nail exposed. Place center

hole of blade over the head of the nail. If blade is balanced, it should remain in

a horizontal position. If either end of the

blade moves downward, sharpen the heavy end until the blade is balanced.

GRASS CATCHER

The grass catcher may be hosed with water, but must be dry when used. Check your grass catcher often for dam- age or deterioration. Through normal

use it will wear. If catcher needs replac- ing, replace only with approved replace- ment catcher shown in the Repair Parts

section of this manual. Give the lawn

mower model number when ordering.

ENGINE LUBRICATION

Use only high quality detergent oil rated with

API service classification SF-SJ, Select the oil's SAE viscosity grade according to your

expected operating temperature.

shaft

+ 28 hidden pages

Craftsman 917388061 Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual