Craftsman 87559750 Owner’s Manual

Owner's Manual

Deluxe Service Cart

Padded Surface, Locking Top, Dual Locking Drawers,

Locking Pry Bar Holder and Side Work Shelf

Model No.

875.59750

WARNING:

Read this manual and follow all Safety Recommendations and

Operating Instructions.

• Safety

• Warranty

• Features&Operation

• Maintenance

• EspaSol

Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179

www.Sears.com

Warn,ng

Improper Assembly can cause broken parts. Read Instruction before assembling.

Broken parts can cause injury.

Units can tip or strike you.

Do not open more than one loaded drawer at a time.

- Close lid and lock drawers before moving. Do not step in or on drawers.

- Secure units together with fasteners. Do not exceed 50 Ib load capacity per shelf or drawer. Do not exceed 150 Ib load capacity per cart.

- Apply breaks on locking casters when not moving.

Tipping of storage

unit can cause injury and

damage.

Component edges can cut or pinch.

- Wear gloves when lifting by edges. Keep feet and fingers clear of edges, when stacking,

hanging, or moving unit.

Move cart slowly when loaded, avoid cracks, holes, and

other floor irregularities.

Do not pull or push to move; unit edges can cause injury.

Particles may fly during assembly. Both the

assemblers and bystanders must wear

proper safety glasses during assembly. Flying particles can cause eye injury.

SAFETY AND WARNINGS AND CAUTIONS

• DO NOT stand on this product. You may fall which may cause personal injury.

• WEAR SAFETY GLASSES when removing or repositiojing the slides. The tool could slip which may cause personal injury.

• When moving this product, do not pull it. Push the product to prevent personal injury.

• Handle and swivel castors must be attached on the same side of the product.

• USE BRAKES when not moving this product. This will prevent the product from rolling, which

may cause personal injury.

• BE CAREFUL when opening more than one drawer. This product will become unstable and tip, which may cause personal injury or product damage.

• Appropriately secure this product before moving it with a forklift

• DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.

• DO NOT alter this product in any manner. For example, do not weld external lock bars or attach electrical equipment. This may cause product damage or personal injury.

• A heavy duty side cabinet must be used on an equally heavy duty cart.

• Keep the product on level surfaces. The product may become unstable and tip if stored or moved on un-level surface, which may cause personal injury or product damage.

• BE CAREFUL when closing the cover. Remove hands before the cover closes completely to

prevent injury

• DO NOT exceed 50 Ib maximum load capacity each drawer or shelf.

• DO NOT exceed 150 Ib maximum load capacity per cart.

• Close the cover and lock the drawers and doors before moving this product. The drawers or doors could come open and make the product unstable and tip, which may cause personal

injury or product damage.

• Remove the work surface, if provided, from the cart before mounting the chest. Failure to do so

may cause the chest to slide off, which may cause personal injury or product damage.

• When locking the chest, close the drawers before closing the cover for lock bars to work

properly.

• Spread the weight out evenly in the tote trays. If the weight is not spread out evenly, the contents could shift and fall out. which may cause personal injury, and damage to the contents or tote

tray.

Deluxe Service Cart

Padded Work Surface, L ocking Top, Dual L ocking Drawer

Locking Pry Bar Holder and SideWork Shelf

Component edges can cut or pinch.

• Wear gloves when lifting by edges.

• Keep feet and fingers clear of edges when stacking, hanging, or moving units.

• Move cart slowly when loaded, avoid cracks, holes and other floor irregularities.

• Do not pull; push to move. Unit edges can cause injury.

Particles may fly during assembly Wear safety goggles, assembler and bystanders. Flying particles can cause eye injury.

@ @

Improper assembly can cause broken parts. Read Instructions before assembling.

Broken parts can cause injury.

Units can tip or strike you.

Do not open more than one loaded drawer at a time.

Close lid and lock drawers before moving.

Do not step in or on drawers. Secure units together with fasteners.

Do not exceed 150 Ib load capacity per cart tl_]_

Apply brakes on locking casters when not moving.

Tipping of storage unit or unit striking you can cause injury and damage,

TOOLS NEEDED FOR ASSEMBLY:

#2 or #3 Phillips Screwdriver _--- _

10mmWrench _ Hardware Included for Assembly:

Bolt Nut Flat Washer Lock Washer

Screw

i¸

@ ©

8 8 16 8

ASSEMBLY INSTRUCTIONS

Step 1. On a clean surface to protect against marring

the cart surface, carefully lay the pre-assembled Padded

Locking Top and Dual Locking Drawer Unit (#1) on its back. Unlock top and carefully lay the top back on the floor.

Step 2. Slide the C hrome Legs (#2) into the square holes on

each side of the Locking Top until the holes nearest the top

portion of the Chrome Legs are aligned with the bolt holes in the Locking Top. However, do not install bolts at this

time. Next, determine on which side of the Service Cart the

Pry Bar Holder (#12) and the Side Work Shelf (#11) will be mounted. (Each may be mounted on either side.)

Step 3. Open the Locking Pry Bar Holder (#12) and, with the lip on the back of

the Pry Bar Holder resting on top of the Locking Top frame, align bolt holes with the bolt holes in Locking Top and Legs. As shown in the diagram, insert two bolts

with one flat washer each through Pry Bar Holder, Locking Top and Legs and fasten using one flat washer, lock washer and nut on each bolt. Tighten securely.

Return Pry Bar Holder to the locked position before proceeding.

Step 4. On opposite side of cart, mount the Side Work Shelf (#11) in the same manner as outlined in Step 3. Once fasteners are tightened securely, open Side

Work Shelf and lock into place by resting the bottom edge of support plate in the

lip portion of the mounting plate.

Step 5. Slide Bottom Tray (#10) onto Chrome Legs (#2), align bolt holes and install fasteners in the same sequence as in Step 3, but do not tighten bolts until all four have been installed. Then, tighten all fasteners securely.

Step 6. Insert one caster (#3 & #4) into each of the four plastic inserts.

NOT E : Insert the two locking casters (#3) at the same end of the cart.

You are now ready to set the assembled Service Cart upright onto its wheels.

Bolt

Flat

Washer

+ 9 hidden pages