Craftsman 875199190 Owner’s Manual

Owner's Manual

PROFESSIONAL

Pneumatic 3/8" Drive

RATCHET WRENCH

Model No.

875.199190

WARNING:

Before operating tool, read

• this manual and follow all
Safety Recommendations and

Operating Instructions_

• Safety
÷ Warranty
_, Features & Operation

• Maintenance

• Espar_ol

Sears, Roebuck and Co., Ho#fman Estates, IL 60179 USA

Read Operating Inst]'uctJons
Please bec_me familiar with all the instrt_ctionsand

warnings before Operating any pneurnatio tool.

Al_ys Wear Approved Eye Protection

Lmpact resistant eye protection should meet or exceed

the standards set forth in ANSI Z87.1, Occupational and

Educational Eye end Face Protection. Look for marking

ZBT.1 on your eye pretec_ion to ensure that it is an

approved style.

Hearing Prot_cUon is Recommended'
Hearing proteCteD should be used when the noise level
exposure equals or exceeds an 8 hour tiros-weighted

average sound level of 85dBA. Process noise, reflective
surfaces, other tools beieQ operated'nearby, all add to the
noise level in a given work area. If you are unable to

determ[ne your noise level expOsure, we recommend the
use of hearing protection.

Avoid Protanged Exposure tO V1brafion
Pneumatic, tools can vibrate during use. Prolonged

exposure to vibnation or very repetitive hand and a_l
movements can cause injury. Discontinue the use of any

tOOl if you experience tingling, numbness, discomfort or

pain in your hands or arms. You should censult your
physician b_fore resuming use of tool.

FULLTWO YEAR WARRANTY ON CRAFTSMAN

AIR-DRIVE TOOLS

Ifthis CraftsmanAir-DHve Tool fails to givecomplete

satisfaction within two years from the date of
purchase, RETURN ITTO THE NEAR_ST aF_AR$

SERW CECENTE RR)EPARTM ENT iN,_:HE UNITED

STATES, a_d aeara will repair it, free of charge. Ifthis

Craftsman tool Is us_l for commercial or rental
purposes, this warranty applies for oniy 90 days from

the date of purchase. Thiswarranty gives you specific

legal rights, and you may also have ,_ther rights which

vary from state to state.

Sears, Roebuck and Co,, Dept. 817WA, Hoffman

Estates, IL 60178.

The Craftsman Pro'Model 875.199190 3/8" Ddve

Ratchet Wrench isdesigned for applications such as
autometJve repair, general assembly, transmission

tear-down, and maintenance, Features include a lever

throttlefor speed cOnlmland a low profilehea0 for

work in close quarters.

90 PSIG Maximum
This tool is designed to operate at an air pressure of 90

pounds per square inch gauge pressure (90 PSIG)

maximum, at the tool. Use of higher air pressure can and
may cause injury. Also, the use of higher air pressure

places the internal components under loads and
stresses they were not designed fo_. which cOuld cause

premature tool failure.

NOTE: TH_ AiR SUPPLY SHOULD BI_ CLEAN AND DRY,

PREFERABLY LUBRICATED, FOR BEST RESULTS
DRAIN THE MOISTURE FROM YOUR COMPRESSOR

DAILY.

Usa Only Power Sockets & Accessories
Sockets and accessories used shall be of the pOwer

socket type. Always check sockets, retainers and drives

regularly for wear or clamaQe and replace whenever

necessary.

WARNING:
S_E DLIST CREATED BY P_R SANDING. SAVVING, GRIND-

INC. DRILLING, AND OTHER CONSTRUCTt(_N ACT]VInES
CONTAINS CHEMW,ALS KNOWN TO CAUSE CANCER, _ Rll-I

DEFECTS OR REPRODUCTIVE HARM. SOME ID_MPLES OF
THESE CHEMICALS AR_:.

LEAD FROM LEAD-aASEO PAl N'i'_
CRYSTALLINE SILICA FRO_ BRICKS, CEMENTAND

OTHEP_ MASONRY PRODUCTS;

A.D.SENIC AND CHROMIUM FROM CHEMICALLY

-r"RF-.ATt_13LU M _.R

YOL_ RISKFROM THEaF _=_POSLJRESVARIES, DEPENDING ON
HOW OFTEN YOU {30 THIS TYPE OF wORK. TO REDUCE YOUR
_XPOSURE TO THESE C_i_MICALS. WORK IN A W_LL VENTI-

LATE D AREA ANe We RK _TH APPROVe{3 S_M:ETY EQ_IPMENT
SUCH AS'rt-iOSE DUST _V_-_SKS T;-tATAR ESPECIALLY DE-
SIGNED TO FILTER OUT MICROSCOPIC pAR'I]CL_S.

Features

• Moldedpob/urethane housingCOVerfor increased

: operatorcontTol and comfort

= 1-1/8" Ratchet head height (without socket) for

use in dose-quarter applicattons.

• Front axhaustdirects air away from operator.

The Craftsman Pro 3J8"E)r_veR_tchet Wrench is
designed to operate on90 P$iG. Lower pressure

(below 90 PSIG) will reduce perfon'nance of thetool

while higherair pressure (over 90 PSIG) raises the

performance ofthe tool beyond its rated capacity and
could cause serious damage to tool and user.

AJwaysuse clean dry air. Excessive moish_re and dirt
wilt greatly reduce the life of any air motor. We

recommend the installation of an in-linefilter-regulator-
lubricatoras close to _e tool as possible.

A 3/8" air hose is required up to a length of 8 'ft.If
more length is required, a l/2" air hose should be
connected to _e 3/8" hose to ensure the tool has tr_e

necessary air supply. 8e sure a{{hoses and fittings

are the correct size and tightly secured.

(2)