Craftsman 76637 Assembly Instructions Manual

45-In. One Drawer
Workbench

9

76637

UNPACKING

1. Remove top of box. Remove styrofoam packing and
loose cardboard corner inserts. Remove leg packaging
from front of box.

2. Use utility knife to cut down box corners.

3. Carefully remove top tray from bottom shelf.

4. Remove remaining work bench parts from box. Be sure
to separate supportive plates from back legs and slide
boards from front legs.

5. Compare all parts with the Package Contents list and
the Hardware Included count. If any part appears
missing or damaged, do not proceed with assembly.
Repack and return bench to store where purchased
for exchange.

Assembly Instructions

Español, página 7

For Help Line, Parts and Service:
Call 8 am - 5 pm, CT, Monday - Friday
1-888-448-6746

Used under license

Printed in China

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

www.craftsman.com

Table of Contents

Table of Contents ...................................2

Safety Information ..................................2

FCC Warning .......................................2

Safety Information

Please read and understand all instructions in this manual before you
assemble of use this product.

□ Do not open more than one drawer at a time.
□ Do not let children approach the product.
□ To help prevent the product from tipping, load the product

starting from the bottom drawers.

□ Keep the locking caster brakes set unless you are moving the

work station. This prevents the product from rolling.
□ Lock all drawers before moving the product.
□ Push this product. Do not pull.
□ Do not alter this product in any manner.

CALIFORNIA PROPOSITION 65 WARNING:

WARNING: This product contains chemicals

known to the State of California to cause cancer
and birth defects or other reproductive harm.
For more information: www.p65warnings.ca.gov

Warranty ..........................................3

Pre-Assembly ....................................3-4

Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

DANGER: Do not stand on this product. You may fall or
cause the product to tip.

DANGER: Do not move the product prior to closing and
locking all the drawers. The drawers could come open and
make the product unstable and tip.

WARNING: Keep the product on a level surface. The
product may become unstable and tip if stored or moved on
an uneven surface.

CAUTION: Do not lift this product directly with a forklift or
tow with any mechanical devices.

CAUTION: Only transport this product when empty.
Properly secure when transporting.

FCC Warning

Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

□ Reorient or relocate the receiving antenna.
□ Increase the separation between the equipment and receiver.
□ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2

Warranty

CRAFTSMAN ONE YEAR LIMITED WARRANTY

FOR ONE YEAR from the date of sale this product is warranted against defects in material or workmanship.
WITH PROOF OF SALE a defective part will be replaced free of charge. If a replacement part is unavailable, the product will be replaced with
one of equal value.
For warranty coverage details to obtain free replacement, visit the web page: www. craftsman. com/ warranty
This warranty does not apply to a product that is damaged or altered through transportation, misuse, abuse,
corrosion, accident, neglect modification or mishandling, nor does coverage apply if the product is ever attached to a moving vehicle.
This warranty is void if this product is ever used while providing commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179

Pre-Assembly

MAXIMUM WEIGHT CAPACITIES

Top storage tray
Wooden top

Drawer
Bottom tray
Total capacity

50 lbs.
300 lbs.

100 lbs.
350 lbs.
800 lbs.

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

AA Screw ST6.3x12 56 (+2 extra)
BB Bolt M4x10 2
CC Hex nut M4 2
DD Bolt M6x12 6
EE Hex nut M6 6
FF Pan head tapping screw ST4.2X12 6
GG Pan head tapping screw ST4X8 2

TOOLS REQUIRED

Phillips screwdriver
#2 and # 3

7mm for NUT M4
10mm for NUT M6

3

Pre-Assembly (continued)

PACKAGE CONTENTS

Part Description Quantity Part Description Quantity

A Bottom shelf 1 J Pegboard 1
B Left front leg (L) 1 K Top storage tray 1
C Right front leg (R) 1 L Side board for top storage tray 2
D Left back leg (L) 1 M Wooden top 1
E Right back leg (R) 1 N Hook 5
F Top tray 1 O Protective ring 4
G Sliding drawer 1 P Power outlet 1
H Supportive plate 2 Q Handle 1

I Drawer slide for sliding drawer 2 R Plastic cover for handle 2

4